Avionics
(more ...)
CANCAN
FlexRayNow, physical layer waveform observation and protocol analysis of FlexRay bus signals are available in a single measuring instrument. Easily trouble-shoot voltage surges, noise, level fluctuations, and other sources of FlexRay bus errors.
I²CThe trigger types are Start trigger, Non–Ack trigger and Address trigger.  Combination triggers with these I2C bus trigger types can be set using analog signals on other channels.
Acquired waveforms are analyzed in a time series, and analyzed results are decoded and displayed one byte at a time.  When a cursor is moved over the onscreen data, the corresponding waveform is automatically enlarged in the zoom area.
You can search rapidly for a specified addresses and data pattern in the analyzed results.  When the specified data are found, the cursors automatically move to the corresponding location, and the waveform is enlarged in the zoom area.
SPIThe trigger condition can be set as 'A pattern' (MOSI) or 'B pattern' (MOSI or MISO) in units of 1 byte.  You can set the trigger pattern (condition) to be as long as continuous 8 bytes.                     List the data codes (Bin or Hex display switchable) and the state of SS, along with the waveform data.  In the detailed analysis results display window, the time information from the reference point, binary codes of MOSI and MISO can be displayed as well.                                                    The specified MOSI or MISO Data codes (up to 8 bytes) can be searched rapidly.  When the specified data are found, the cursors automatically move to the corresponding location, and the waveform is enlarged in the zoom area.
USB 2.0The USB 2.0 compliance test solution*1*2 busXplorerTM-USB takes advantage of the wide variety of DL9000 trigger and analysis functions to offer a system for carrying out highly automated USB compliance tests. In addition to facilitating execution of the various tests from a PC via Ethernet, the newly developed test software displays detailed test procedures including the wiring method. This allows even inexperienced operators to easily perform the tests.