Abaco VME-3123A VME Analog I/O Input Boards

Product Overview:

  • 16 differential analog input channels
  • Software-selectable as 1, 2, 4, 8 or 16 active channels 
  • 16-bit A/D converters; one per channel
  • Simultaneous sample-and-hold inputs
  • High throughout
    • 1,600 kHz aggregate sample rate
    • 100 kHz per channel; 200 kHz with channel pairing
  • Digital calibration; no channel trimmers
  • Built-in-Test; internal references applied to channel inputs; all active devices tested
  • Large data buffer; up to 4 million data samples
  • Transient capture mode triggering on input signal
  • Continuous sampling mode
  • Triggering capabilities
    • Internal, external, VME host triggering, or multiboard synchronous
  • ±10 V, ±5 V input ranges with bipolar option and +10 V, +5 V input ranges with true unipolar option
  • Selectable delay
  • Low pass filters for antialiasing
  • Interrupter
More

16-Bit High-Throughput Analog Input Board, 16 Channels with Simultaneous Sample-and-Hold Inputs

Specifications

Form Factor: VME
Function: 16-bit ADC
Channels: 8, 16
Channel Voltage Ranges: ±5V, ±10V
Throughput: 100 or 200 kHz


More Product Information

  • One ADC12D2000RF: Singlechannel 12-bit 4Gsps or dualchannel 12-bit 2Gsps
  • One AD9129: Single-channel 14-bit D/A up to 5.7 Gsps (2.85Gsps without 1:2 interpolation) - LVDS
  • VITA 57.1-2010 compliant
  • Single-ended, AC-coupled analog signals
  • 6 MMCX/SSMC connectors available from the front panel
  • 4 LVTTL signals available from an HDMI connector on the front panel
  • 4 Xilinx MGT available from an HDMI connector on the front panel
  • Clock source, sampling frequency through SPI communication busses
  • Flexible clock tree enables:
    • Onboard VCO: 2200MHz - 4400MHz
    • External reference clock
    • External sampling clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC (high-pin count) compatible
  • LVDS IO signaling

  • Eight channel 16-bit 250MSPS A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2010 compliant
  • Based on TI ADS42LB69
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Flexible clock tree enables:
    • internal clock
    • internal clock locked to an external reference
    • external clock
    • external sync / 1PPS
  • LPC (low-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant - Optional

  • Four channel 16-bit 250MSPS A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2010 compliant
  • Based on TI ADS42LB69
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Differential analog inputs - Optional
  • Flexible clock tree enables:
    • internal clock
    • internal clock locked to an external reference
    • external clock
    • external sync / 1PPS
  • LPC (low-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant – Optional

  • Four-channel, 16-bit A/D up to 370 MSPS
  • VITA 57.1-2010 compliant
  • JESD204B serial interface
  • Conduction-cooled – Standard Option
  • AC or DC-coupled analog signals
  • 6 SSMC/MMCX front panel connectors
  • Clock source, sampling frequency, and calibration through SPI communication busses
  • Flexible clock tree enables:
    • Internal clock source
    • External sampling or reference clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC (high-pin count) compatible

  • 4-Channels 16-bit 1.00 Gsps A/D
    • 1.5 GHz Analog Bandwidth
    • Usable in the 3rd Nyquist Zone
  • VITA 57.1 compliant
  • Conduction Cooled - Standard Option
  • DC coupled analog input
  • Internal clock or external clock
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC - High Pin Count Connector
  • 6 front panel SSMC or MMCX connectors
  • 2Kbit EEPROM (M24C02- WDW) accessible from the Host via I2C bus

  • 16 channel 14-bit 125 Msps A/D conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on LTC2175-14
  • 1.5V to 3.3V VADJ operation
  • Single ended DC coupled inputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (high-pin count) compatible
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies
  • Optional SSMC/MMCX clock and trigger IO on the back of the FMC (consult factory)
  • MIL-I-46058c conformal coating (optional)

  • 12 channel 14-bit 125 Msps A/D conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on LTC2175-14
  • 1.5V to 3.3V VADJ operation
  • Single ended DC coupled inputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • LPC (low-pin count) compatible
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies
  • Optional SSMC/MMCX clock and trigger IO on the back of the FMC (consult factory)
  • MIL-I-46058c compliant (optional)

  • Eight channel 14-bit 250Msps A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2008 compliant
  • 1.5V to 3.3V VADJ operation
  • Based on TI ADS62P49
  • LVDS or 1.8V LVCMOS output operation
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Optional analog differential input
  • Flexible clock tree enables:
    • internal clock
    • external clock
    • cascading multiple boards – Optional
  • HPC (high-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant - Optional

  • Four channel 14-bit 250 Msps A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2008 compliant
  • 1.5V to 3.3V VADJ operation
  • Based on TI ADS62P49
  • LVDS or 1.8V LVCMOS output operation
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Optional analog differential input
  • Flexible clock tree enables:
    • internal clock
    • external clock
    • cascading multiple boards - Optional
  • LPC (low-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant - Optional

Abaco Systems (formerly GE Intelligent Platforms)

For 12 years, we were the embedded computing business of GE Intelligent Platforms - itself formed from a series fo acquisitions of market-leading embedded computing companies. 

The entire GE Intelligent Platforms team, around 700 people - made the transition from GE, meaning that our customers continue to deal with people with whom they've had relationships for years and in some cases, decades. 

Also making the transition from Ge are the robust, repeatable business processes for which the company is renowned - but these are now finely-tuned to the specific needs of our embedded computing customers.

We have brought with us from GE an absolute, all-overriding commitment to ethics. That commitment is fundamental and central to all our interactions with you. Trust is paramount to all our relationships. 

Abaco Systems products and solutions can be found in many high profile military/aerospace sea, land and air programs, as well as in commercial and industrial organizations in which rugged reliability is mission-critical. 

Abaco Systems is a global leader in open architecture rugged embedded systems. Spun out of GE in 2015 we combine the attitude and customer focus of a startup with 30 years of experience delivering rugged embedded computing products and solutions. 

I need help with my Abaco product.

Our technical experts are ready to help. our Technical Support organization can be reached as follows: 

Americas customers

T: 1-800-322-3616
EMEA customers

T: +44-1327-322760
Asia Pacific/Oceania

T: +81-3-55443973
Special Avionics I/O customer hotline
T: 1-805-883-6097
Email: suppport@abaco.com

Tweets by @abacosys