Aeroflex Fuel Interfaces

Product Overview:

Cobham AvComm supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units.  Combined with a Cobham AvComm Fuel Quantity Test Set, the Cobham AvComm test solution provides complete functional testing and troubleshooting of the fuel quantity system.  If you are unable to find your aircraft listed here, Cobham AvComm also offers design services for the development of new interfaces and aircraft test procedures.    
Available through your GSA Supplier  

Requirement Sheets

Title Version/
Date View/

Rev. 6

Airbus A300

Rev. 4

MV-22/CV-22 Osprey

Rev. 2

Boeing 727 Classic

Rev. 3

Boeing P-8A   02-11-2016
Boeing 747 Classic

Rev. 3


Rev. 2

Airbus A300-600

Rev. 3

Airbus A310

Rev. 1

Boeing 737 Classic

Rev. 4

Boeing 737-NG

Rev. 3

Boeing 747-400

Rev. 3

Boeing 757

Rev. 3

Boeing 767

Rev. 3

EADS CASA CN-235 and C-295

Rev. 4

F-15 FMS

Rev. 5

F-15 US Air Force

Rev. 3

F-16 Block 60

Rev. 3


Rev. 2

Lockheed C-130 with PSD90-1C

Rev. 7

Lockheed C-130 with PSDAF-10x

Rev. 7

Blackhawk - Apache

Rev. 2

Bell Helicopter UH-1, AH-1, 205, 204, 214

Rev. 2


Rev. 13


More Product Information

  • Easy to operate/calibrate
  • Annual calibration
  • Lightweight / portable
  • Rechargeable battery or externally powered
  • Percent of battery capacity displayed
  • Self-test on power-up
  • Measures DC voltage
  • Manual or Auto Ranging
  • 2 and 3 Wire Meggar
  • Compliant with Boeing Spec 10-61959 Rev H
  • MIL-STD-810 Method 511.4 certified
  • Traceable to NIST
  • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*

  • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
  • Modular design for high reliability and low maintenance
  •  Closed box calibration using front panel controls - performed annually
  • Battery powered with percent of charge displayed
  • Maintenance codes displayed to aid in troubleshooting
  • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
  • Large selection of aircraft specific interface cables readily available

  • Solid-state circuits and LCD backlit display for low power consumption and high reliability
  • Battery-powered for complete portability and ease of maintenance
  • Lightweight aluminum case has hinged compartment in lid for test lead storage
  • Small size permits testing in restricted spaces
  • Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
  • Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks

  • Solid-state circuits and Liquid Crystal Display for low power consumption and high reliability. LCD is backlit for enhanced viewing.
  • Tested and approved for use with fuel in tanks.
  • Portable, lightweight, sealed, high-impact ABS case reduces weight of tester with batteries installed to less than 12 pounds.
  • Small size permits testing in restricted spaces - 10.5"W x 14"L x 6"H. Ideal for Forward Area Deployment.
  • Easy to operate; choose the FUNCTION desired and read the measured capacitance, insulation or voltage on the display.
  • Auto-ranging circuit and 4.5 digit display permit resolution to .01 Pf in capacitance functions and .01 meg in insulation (megger) function.
  • Digital Multi-Meter (DMM) function reads external voltage up to 40 VDC.
  • BATTERY CHECK function reads % of usable battery charge remaining.
  • Recommended annual calibration interval. Stability of the measuring circuit eliminates need to recalibrate each time unit is used.
  • Two year standard warranty.
  • CE Marked - 

  • PCI-X 133 MHz, PCI 64-bit/66 MHz
  • DMA engine
  • Full 2000 Mbit point-to-point performance 
  • Jumbo frame capable
  • Four 10/100/1000BaseT copper ports
  • Supports auto-negotiation
  • RoHS 2002/95/EC compliant
  • Conformal coating available
  • Wide operating temperature option -20°C to +70°C

  • Packet filtering based on checksum errors
  • SNMP and RMON statistic counters
  • Hardware TCP checksum offloading
  • Support for various address filtering modes:
    • 16 exact matches (unicast or multicast)
    • 4096-bit hash filter for multicast frames
    • Promiscuous unicast and promiscuous multicast transfer modes
  • PCI-X 133 MHz, PCI 64-bit/66 MHz
  • Connector options SC, LC
  • DMA engine
  • Dual/single 1000 Mbit Ethernet
  • Jumbo Frame capable
  • 1000BaseSX or optional 1000BaseLX
  • RoHS compliant
  • Versions supporting wide operating temperature range available

  • Dual 10BaseT/100BaseTX/1000BaseT network interface card with rear panel access
  • Single-wide 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-x PMC
  • Auto-negotiating protocol FIFOs
  • Drivers for VxWorks, Linux, Windows NT and Windows 2000 available
  • Supports Jumbo frames
  • Conduction cooling
  • Conformal coating
  • Extended operating temperature range: -40C to +85C when temperature screened
  • Rear panel access provided by the PIM-GBIT-DT module; module has two RJ45 connectors and LED indicators for link, speed and activity

  • Dual 10BaseT/100BaseTX/1000BaseT network interface card with rear panel access
  • Single-wide 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC
  • Auto-negotiating protocol selection
  • Transmit and receive FIFOs
  • Drivers for VxWorks, Linux, Windows NT and Windows 2000 available
  • Supports Jumbo Frames
  • Rear panel access provided by the PIM-GBIT-DT module; module has two RJ-45 connectors and LED indicators for link, speed and activity

  • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
  • ADS-B Target Generator
  • ADS-B squitter encode/decode
  • DO-260, DO-260A and DO-260B data parsing
  • DO-260B canned tests available (option)
  • Generates ATCRBS/Mode S interrogations
  • Multi-receiver test capability (option)
  • UAT TX/RX capability (optional)
  • Pulse and frequency measurement
  • 10.4 inch touch screen LCD display for operator control of all test set capabilities
  • Remote controlled via GPIB or Ethernet
  • Two independent transmitters and receivers
  • TX/RX data logging capability
  • Full diversity testing capability
  • Data parsing in engineering units

Cobham (formerly AEROFLEX)

Aeroflex is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.

Our customers have complex, high-performance requirements and are predominantly found in the aerospace, defense, wireless mobile, broadband communications and advanced manufacturing markets. Founded in 1937 and now with 2,950 employees worldwide, Aeroflex has developed substantial intellectual property through decades of collaborative design, manufacturing, R&D and service experience with customers. Aeroflex customers depend on our unique expertise to validate the high quality and high performance of their products and get to market faster.

Learn More

AvComm Technical Support Request Form

Aeroflex Service Centers

Phone: (516) 694-6700
oll Free: 1-800-843-1553
Fax: (516) 694-0658


Avionics Test GPS Simulators
Manufacturing Test Systems (ATE) Microwave Test
Modular Instrumentation Semiconductor Test
Signal Generation Spectrum & Signal Analysis