AMETEK Sorensen XPF Series

AMETEK Sorensen XPF Series

Product Overview:

Key Features
  • PowerFlex design provides higher currents at lower voltages enabling one model to meet many different voltage/current requirements
  • Compact design for bench use or rack mounting (1/2 or 1/4 rack width)
  • True analog controls with digital settings locking (S-Lock)
  • Mixed-mode regulation with linear final regulation for low noise
  • Dual models have isolated voltage tracking and synchronous on/off
  • P models have GPIB, RS-232, USB and LXI compliant LAN interfaces plus duplicate rear terminals
  • Power Factor Correction (PFC)
  • Individual on/off switch per output
  • Dual isolated outputs
  • PowerFlex design gives variable voltage/current combinations
  • Coarse and fine voltage controls
Protection
  • Over voltage protection per output
  • Switchable remote or local sense

 

More

180W - 840W Benchtop DC power supply featuring single and dual isolated outputs designed to meet the need for flexibility in the choice of voltage and current.

 

The Sorensen XPF is a new type of bench power supply designed to meet the need for flexibility in the choice of voltage and current. Typically, the maximum voltage and maximum current are not required simultaneously. The PowerFlexTM design enables higher currents to be generated at lower voltages within an overall power limit envelope. This is achieved by using the latest switch-mode technology.

The XPF60-20D are dual output DC power supplies with two completely independent and isolated outputs. If required, the outputs can be wired in series or parallel to achieve up to double the maximum voltage or double the maximum current. The new XPF60-20S is a single output version of the XPF60-20D providing 60V and 20A within its 420W power envelope.

The XPF Series has advanced digital features while keeping its simple to operate analog controls. The series
also has a remote programming option making the popular XPF perfect for some ATE applications. 
The interfaces included: LXI Class C Ethernet, GPIB, USB and RS-232/423. Please se
e the XPF download section for XPF60-20DP brochure that fully describes the advanced features.

 

Electrical Specifications
Model XPF 60-10D Series XPF 60-20 Series
Voltage range 0 V - 60 V 0 V - 60 V
Current range 0 A - 10 A 0 A - 20 A
Power range Up to 180 W per output, see PowerFlex power envelope graph Up to 420 W per output - see PowerFlex power envelope graph
OVP range 10% - 110% of maximum output voltage 1 V to 66 V
Voltage setting By coarse and fine controls
Current setting By single logarithmic control
Line regulation <0.01% for a 10% line voltage change.
Load regulation Change in output for any load change within PowerFlex envelope, remote sense connected: Constant voltage: <0.01% of maximum output. Constant current: <0.05% of maximum output.
Ripple and noise
(20 MHz bandwidth)
Both outputs loaded at 16V/10A , CV mode: Typically <1mVrms, <15mV pk-pk; 3mVrms max. 5mVrms max; typically <3mVrms, <15mV pk-pk, at maximum load, CV mode.
Transient response <250µs to within 50mV of setting for a 5% to 95% load change.
Output protection Forward protection by OVP trip. Reverse protection by diode clamp for reverse currents up to 3 A.
Temperature coefficient Typically <100ppm/°C
Status indication LED indication of Output On, CV, CC and Power Limit. Message on display for over-voltage trip
Output switch Push-push switch operating electronic power control. Preset voltage and current are displayed when the output is off.
Output terminals 4mm terminal on 19mm (0.75") pitch. 15 A max. rating 4mm terminal on 19mm (0.75") pitch. 30 A max. rating
Sensing Remote sensing via a front panel terminal block or local sensing (at output terminals). Selection by slide switch
Meter resolution 10 mV, 10 mA
Meter accuracy
Voltage 0.1% +/- 2 digit
Current 0.3% +/- 2 digit
General Specifications
Model XPF 60-10D Series XPF 60-20 series
AC Input 110 to 240 volts ±10%
50/60Hz. Installation Category II
Power consumption 600 VA max. 1250 VA max.
Operating 
temperature range
5°C to 40oC, 20 to 80% RH
Storage range -40oC to + 70oC
Environmental Indoor use at altitudes up to 2000m, Pollution Degree 2
Safety Complies with EN61010-1
EMC Complies with EN61326
CE-marked units meet EN61010-1 and EN61326
Dimensions (HxWxD) 210 x 130 x 375mm (1/2 rack width 3U) Single - 107 x 130 (¼ rack 3U) x 398mm
Dual - 210 x 130 mm (½ rack 3U) x 377mm
(size excludes feet, knobs and terminals)
Weight 5.4 kg (11.9 lb) Single - 4.25 kg (9.35 lb), Dual - 6.3 kg (13.9 lb)
XPF35-10 Power Envelope (each output)
XPF 60-10

 

XPF60-20 Power Envelope (each output)

 

Note: Specifications subject to change without notice.