Dualos - LCF Open Line Plugs
*Approximate Dimensions [inches]
Part Number |
Tube OD |
Tube ID |
Wall Thickness |
Tail Stamp |
NEO 406F-A-06 | 0.375 | 0.311 | 0.032 | N6 |
NEO 407F-A-06 | 0.375 | 0.337 | 0.019 | W6 |
NEO 410F-A-08 | 0.500 | 0.414 | 0.043 | N8 |
NEO 411F-A-08 | 0.500 | 0.456 | 0.022 | W8 |
NEO 412F-A-10 | 0.625 | 0.517 | 0.054 | N10 |
NEO 413F-A-10 | 0.625 | 0.579 | 0.023 | W10 |
NEO 416F-A-12 | 0.750 | 0.620 | 0.065 | N12 |
NEO 417F-A-12 | 0.750 | 0.696 | 0.027 | W12 |
NEO 420F-A-04E | 0.457 | 0.251 | - | NE-04 |
NEO 421F-A-08E | 0.772 | 0.503 | - | NE-08 |
NEO 422F-A-10E | 0.929 | 0.629 | - | NE-10 |
NEO 423F-A-12E | 1.110 | 0.755 | - | NE-12 |
More Product Information
-
DC, AC and RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Full thermal range of -60°C to +300°C
-
Reliable and repeatable contact
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
High thermal stability components
-
On-axis probe-to-pad alignment
-
Flexibility from hot only to full thermal range of -60°C to +300°C
-
Thermally induced drift can be automatically re-aligned for 30 μm pads in a temperature range from -40°C to 150°C (the effective temperature range depends on pad size, probe card holder and probe card)
-
3 performance level configurations (fully-shielded / shielded / open)
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
User-centered design minimizes training costs and enhances efficiency
- Repair-focused environment for XJDeveloper / XJRunner tests.
- Full Connection test.
- RAM, Flash and other non-JTAG device tests.
- Flash, FPGA, CPLD and EEPROM programming.
- Layout Viewer* to show the physical location of faulty nets, pins and components.
- Schematic Viewer* to show the circuit design around faults.
- Direct control of the pins/balls of JTAG devices.
- View pin states graphically in real time or capture them in the Waveform Viewer.
- Trace signals to identify shorts, opens and other faults.
-
Reduce corporate-wide software overhead and time to production
-
Standardize on ONE common, open-platform interface for all internal RF/Microwave or power projects
-
Modular design allows for scalable solutions in increments of 72 high-current sink, 12 reset/control and 32 TTL I/O channels
-
Design based on Industry Standards (LXI and IVI drivers) to ensure interoperabilty and ease of use
-
Graphical web-based command and control simplifies RF/Microwave system design and debug
-
Enhanced maintenance capability through tracking of relay cycle counts and remote monitoring of fault conditions
-
Modular
-
Assemble your own system. Plug-in RF modules and COTS-based CPUs, GPUs, FPGAs. Selection of JTNC SCA devices (Ethernet, GPS, audio, etc.)
-
-
Multi-Domain
-
Use across your entire organization. Develop for tactical radio, radar, electronic warfare, and signal intelligance domains
-
-
Integrated
-
Accelerate time to market with seamlessly integrated hardware an d osftware. Leverage pre-loaded NordiaSoft SCARI Software Suite
-
-
Multi-Purpose
-
Reduce cost. Support full life cycle development. Simulate design, emulate, and test on one integrated system
-
-
Scalable
-
Protect your investment. Benefit from a true component-based architecture for hardware and software
-
-
Universal
-
Future-proof your products. Leverage open, standards-based COTS software and hardware
-
-
Highly stable granite base
-
Independent, coarse movement of X and Y axes, combined with easy fine adjustments down to submicron ranges
-
Re-configurable for DC, RF, mmW, FA, WLR and more
-
Multiple accessories: Thermal chucks, motorized microscopes and positioners, dark box, and more
-
Low-profile, straightforward design
-
Easy and ergonomic operation
-
Front or backside instrumentation, e.g.: Integrating Sphere, Fiber setup, Pressure Module
-
Front or backside probing capability
Dualos
Sometimes commercial products just won’t cut it. Dualos supplies the avionic industry with most reliable, precision manufactured hydraulic interface components in the market.
With the quality and assurance that’s expected, Dualos partners with major avionics manufacturers to solve complex engineering and test challenges. A lack of commercially available hydraulic test adapters was the problem. This opportunity laid the foundation in forming Dualos’ Hydraulic Interface Components division a decade ago.
Dualos designs, manufactures and provides logistical support for an entire family of Hydraulic Interface Components.
Contact Details
Dualos
917 Pacific Avenue, Suite 400, Tacoma, WA 98402, USA
Phone: 253-750-5125
Fax: 253-212-3539
Email: sales@dualos.com