NEO NXB - 20820 Voltage / Current Breakout Test Box
-
On-Off power switch
-
20 A Circuit Breaker
-
Inlet - NEMA L6-20
-
Outlets – NEMA L6-20R
Test Tap:
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
Single output for passthrough to test rack. Tester pigtail interface simplifies connecting to a variety of voltage/current measuring systems.
Voltage | Current | Input | Output | Test Output | Switch/Breaker |
208 | 20A | L6-20 - Cord | L6-20 R | Pigtail | Yes |
Application
More Product Information
-
15’ Flexible Power Cord
-
IEC C13 / C14 Connectors
Test Tap:
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Low cost ELT option
-
Frequency counter provides external frequency measurement
-
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
-
Eight or more hours of operation before recharge
-
Automatic power shut-down
-
Ergonomic design
-
On-Off power switch
-
30 A Circuit Breaker
-
Inlet - NEMA L6-30
-
Outlets – NEMA L6-30R
Test Tap:
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
-
32 GT/s, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Link widths up to 8-lanes
-
Memory segmentation for capture of multiple traces
-
Simultaneous two-link, dual port capture is allowed by multiple users
-
Host-Client connection for remote debugging using Ethernet, or local debugging using USB
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/ Gather Lists (SGL) etc.
-
Cascade up to four Xgig captures into a single trace view
-
Full support of LTSSM for analysis
-
Field replaceable modular fan and power supply assemblies
-
LED’s give quick indicators of power and status
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
One Pod supports link widths of up to 4-lanes. Multiple pods can expand link widths up to 16-lanes.
-
Downward compatible with PCIe 1.0 to 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Eight differential probe cables support simultaneous upstream and downstream capture
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-sensitivity amplifiers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal triggering and capture
-
Interposer power is independent of host system.
-
Power supply, 120/220 input, 12V/3A output
-
LEDs provide quick indication of power and status
-
Size: 170 x 107 x 34 mm (6.7 x 4.2 x 1.3 in)
-
Works together with multiple VIAVI Xgig PCIe Analyzer chassis types
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
NEO
NEO offers a line-up of Power measurement breakout boxes designed for use with Yokogawa's precision power analyzers.
Test & Measurement
Download Line Card
Document