NH Research 5600 Series Universal Tester

Product Overview:

  • Maximum configuration flexibility with multi-bay capacity
  • Digital measurement system 2 Waveform digitizers and 2×16, 100 MHz multiplexer
  • Expandable input measurement channels
  • Common interface panel
  • emPower™ Test Executive

More

The Power Supply Universal Test System, model 5600, is a turn-key, high performance, universal power supply test platform which is ideal for testing power supplies with DC outputs including those with high-power levels or many outputs. A wide range of stimulus instrumentation combined with advanced measurement capabilities make the 5600 test system an ideal solution for the enterprise requiring the most flexibility in test capability.

Advanced Digital Measurement Capabilities

The core component of this system is the Digital Measurement System (DMS), which features a 2×16, 100MHz multiplexer combined with 2 waveform digitizers. In addition to the higher bandwidth, the DMS provides highly accurate channel-to-channel timing measurements and corresponding waveform displays. Should more than 16-input measurement channels be required, multiple 15-input expansion chassis can be added to the system.

Many Packaging Choices

While the single-bay shown in the above picture is the most popular configuration, two and three-bay systems including higher power and 3rd-party instrumentation are available.

Model 5600 Universal Test System Specifications

Instrument Type AC Sources DC Sources High-Power Loads Modular DC Loads Modular DC Supplies
Power 2.7 to36kVA 5 to 36 kW 6-36kW* 300W 450W
Voltage to 400V to 500V 120/600V 0.7-120/2.1-450V 20/40/80/450V
Current to 200A to 1400A 7200/1800A 60A 60/30/15/8A
Frequency 500Hz        
* The above specifications show typical test system configurations. Contact NH Research, Inc. for more information and assistance in customizing a 5600 Power Supply Functional Test System

The Model 5600 Universal Tester is useful for testing the following applications & products:

Power Supplies, Universal Power Supply Testing

More Product Information

  • Digital measurement system (DMS)
    • 2 waveform digitizers
    • 2×16, 100MHz multiplexer
    • Expandable input measurement channels
  • Maximum configuration flexibility
  • Turn-key test system with included test controller
    • emPower™ test executive

The AQ1300 series is a compact and lightweight Ethernet tester that is designed to improve both work efficiency and quality at the same time, with function optimized for the network path testing and maintenance of Ethernet networks up to 1G or 10G depending on model chosen.

Easy operation prevents operational errors and stabilizes work quality for routine tasks such as network path testing. Powerful analysis functions help isolate failures during maintenance work. The AQ1300 series has two models, AQ1300 and AQ1301 to choose from depending on the measurement interface and bit rate. You can choose the model suitable for your test needs.

  • Voltage Range – 175/350VRMS, 200/400VDC
  • 7 models – 8kW/21kVA to 96kW/252kVA
  • Unique configuration flexibility provides for single, split, three-phase operation plus full-power DC
  • HiVAR design eliminates derating nominal power due to reactive loads
  • Frequency – 30 to 880Hz
  • High-resolution waveform digitizer & scope display
  • Precision ultra-low current measurements
  • Seamless, constant-power operating envelope
  • Built-in 9” touch-panel user interface for manual control & measurement display
  • Graphical waveform editor for user-defined waveforms
  • High-level line disturbance programming Macros
  • External PC option to host NHR emPower® Test Sequencer
  • Alternate programming in LabVIEW, native SCPI, & other IVI-compliant languages
  • Improved power density results in half the panel height of a traditional AC source

  • Analog models with two and three rating
  • AC voltage measurement
  • Automatic discharge
  • Sky blue EL backlight
  • Increased safety (covered battery charger)

  • 8 Sizes – 4 to 96kW
  • Single, Split or Three-Phase programmable
  • 10 to 350VAC
  • 30 to 880Hz
  • DC operation to 10 to 400VDC
  • Reactive power capability 2.6 x Real Power
  • Sink power regenerated back to facility with >90% efficiency
  • Power factor range: -1 to +1
  • Crest factor range: 1.414 to 4.000
  • High-resolution waveform digitizer
  • 9” Touch-Panel user interface
  • High power density/minimum rack space

  • 3 sizes – 150, 300, & 600W @ 120V with advanced measurement capability built-in
  • Mix & match loads for maximum configuration flexibility
  • Up to 16 loads in a single, 8 3/4″ / 5U Model 4300 chassis
  • Front loaded & front connections
  • 3 voltage and 3 current ranges for improved accuracy
  • High-resolution waveform capture for analysis of dynamic transients
  • Isolated digital inputs & outputs for test fixture support
  • PC/LAN control with LabVIEW & IVI drivers

Grid Simulator (4 Quadrant AC source) for Grid-Tied Inverter Testing, Vehicle to Grid (V2G) Testing, AC Power Product Testing, & More!
  • 8 models – 4kW/10.5kVA to 96kW/252kVA
  • Output AC Voltage Ranges – 175, 350VRMS L-N
  • Output DC Voltage – 200, 400VDC
  • Output Frequency – DC, 30 to 100Hz
  • Programmable 1, 2 or 3-Phase modes
  • Full 4 quadrant AC source operation
  • High resolution waveform capture on all V & I
  • Sink power regenerated back to facility
  • 9” Touch-Panel user interface
  • SCPI programming & NI LabVIEW drivers

  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

  • 8 sizes – 1 to 36kW @ 120 or 600V
  • High-resolution waveform capture for analysis of dynamic transients
  • 18 built-in, precision voltage, current, power and timing measurements that eliminate additional dedicated measurement instruments
  • Isolated digital inputs and outputs for test fixture support
  • PC/LAN control using LabVIEW & IVI drivers
  • Optional touch-panel user interface

NH Research

NH Research, Inc. (NHR) designs and manufactures power electronics test instruments and complete turn-key test systems. Its products are used worldwide by manufacturers in the switching DC power supply, UPS, battery and battery charger industries. Applications typically involve either characterization or final test of customer products where a combination of advanced measurements, rapid test times and ease of setup & use are important. NHR has been in the power electronics test business for over 50 years (more about NHR) and has fully equipped facilities with highly skilled employees in Irvine, California and Shenzhen, China.

We have over 50 years experience working with, supporting and manufacturing power electronic test instruments and systems to some of the biggest names in the industry. Including, but not limited to:

Argonne Labs, BAE, Boeing, Chrysler, EADS, Ford, General Dynamics, General Electric, General Motors, Honeywell, Lockheed Martin, Mercedes-Benz, NASA, Northrop Grumman, NREL, Oak Ridge Labs, Raytheon, Sandia, Textron, UL, & UTC

NH Research, Inc. power electronics test systems and instruments deliver the power, precision and flexibility needed to meet or exceed your test solution needs.

Products
Battery Test / Battery Emulation Testing Power Supply Test Systems
AC & DC Electronic Loads AC & DC Sources
AC & DC Regenerative Test Management Software

Social Media Streams

Connect, share, learn & start a discussion about NH Research, Inc. power electronics test systems & instruments through social media! NHR social media pages will keep you up to date with all the latest product news, information, overviews, tips, & upcoming industry events. So follow us on your preferred social media platform below!

Facebook

NH Research, Inc. on Facebook

  • “Like” our NHR business page to receive live news streams.
  • Receive updates on power electronic test systems & instruments, instantly!
  • Like us below:

Like NH Research, Inc.'s Facebook Page

Google+

NH Research, Inc. on Google+

  • Connect with NHR with full Google integration.
  • Live AMA Google Hangouts on NHR power electronic test systems & instruments!
  • Follow us below:

LinkedIn

NH Research, Inc. on LinkedIn

  • Follow the NHR company page for power electronic test system & instrument updates & discussion!
  • Connect & interact directly with the NHR team!
  • Follow us below:

Twitter

NH Research, Inc. on Twitter

  • Follow us, share, discuss & interact in realtime!
  • Receive updates on power electronic test systems & instruments, instantly!
  • Follow us below:

YouTube

NH Research, Inc. on YouTube

  • Subscribe to view all the latest product introduction, overview, & educational videos.
  • Ask our engineering experts questions!
  • Subscribe below:

Phone: 949-474-3900

Email Support Request Page