NH Research S600 Series Multi-Channel Testers DC Power Supply Test System

Product Overview:

  • Maximum test throughput through parallel testing of multiple devices & outputs
  • Ease of reconfiguration or expansion through front-loading, card-based instruments
  • Built-in waveform digitizers on all instruments
  • Space-saving design
  • emPower® Test Executive

More

Model S600 Multi-Channel Test System combines a wide range of configuration options with extremely fast test speeds to deliver the lowest unit-cost-of-test for high-volume power conversion devices such as AC-DC power supplies, adapters, chargers, LED power drivers, DC converters, and voltage regulator modules. S600s may be configured to efficiently test anything between a single supply with as many as 16 outputs, 16 separate single-output supplies or any combination of supplies and outputs between those two limits.

Advantages

  • Digital loads with Advanced Measurement Capability
  • Software test executive emPower® for rapid test sequencing
  • Compact cabinet choices (3 standard sizes)

Benefits

  • Built in features require fewer test devices
  • Ease of reconfiguration or expansion through front-loading
  • Space-saving design

S600 Multi-Channel Power Supply Tester Specifications

Model # S650 S670 S680    
Voltage 600VDC, 350VRMS, Vpk+, Vpk-
Current 20ADC, 20ARMS, Ipk+, Ipk-
Power Average, True, Apparent, Reactive, Power Factor
Frequency 10 – 1000Hz
Waveform Rise Time, Fall Time, Settling Time, Turn-On Time, Hold-Up Time, Time Event, THD
Timing Trigger In, DIN State & Time
Record Length 256K Points
Physical
Common Equipment Dell PowerEdge Server preconfigured w/ emPower Test Executive (1U), 4300 16-Slot Chassis (5U) & pass-through cable management slot (1U)
Overall Cabinet Height* 30” 49” 61”    
Instrument Space 24.5” (14U) 40.25” (23U) 52.5” (30U)    
* includes 2” casters, 2 U reserved for internal wiring.

The S600 Series Multi-Channel Test System is useful for testing the following applications & products:

AC-DC Power Supplies, Adapters, Chargers, DC Converters, LED Power Drivers, Point-Of-Load Converters, Voltage Regulator Modules

More Product Information

  • Preconfigured fully-capability test system in a 35” rack
  • Interchangeable DC loads and sources
  • Embedded Measurement System (EMS)
    • 100 kSamp/s waveform capture
    • 12 channel measurement system
  • emPower™ test executive control
    • PC/Serial interface
    • USB-Serial ∓ LAN-Serial available

  • Digital measurement system (DMS)
    • 2 waveform digitizers
    • 2×16, 100MHz multiplexer
    • Expandable input measurement channels
  • Maximum configuration flexibility
  • Turn-key test system with included test controller
    • emPower™ test executive

  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

  • Best configuration flexibility
  • Custom waveform/profile generation
  • Microsecond voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • 3 test system control options including a Touch-Panel interface
  • Expandable from 12 to 252kW with 40 ,120 or 600V bi-directional DC loads
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation and burn-in applications

  • Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
  • Custom waveform/profile generation
  • Sub-mS voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • Internal controller with software & connections for an external monitor & keyboard
  • Expandable from 12 to 252kW with 40, 120, or 600V bi-directional DC loads
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation & burn-in applications
  • Create, run, monitor, chart & report UUT profiles without writing any code

  • NEW! Tektronix MDO-Series Mixed Signal Oscilloscope
  • Unlimited voltage, current & timing measurements relative to digital signals.
  • Library of design verification test routines reduces program development time
  • Configuration flexibility

  • Wide Operating Envelope at 100kW per cabinet
  • Scalable to 1.2MW/4000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

Automated Characterization, Power Cycling, & Life-Cycle Testing of Low Voltage/High Current Batteries
  • Single output up to 40V/3,600A/72kW per system
  • Parallel expansion up to 7,200A
  • Built-in digital measurements including Ah & kWh
  • Multiple safety layers to protect battery/DUT
  • SCPI, VXI-11, & LabVIEW control via LAN interface
  • NI-Compliant LabVIEW Drivers
  • 87% efficiency returning discharge power to facility
  • Crane/hoist lifting hangers & robust casters

PDS SERIES OF MULTI-CHANNEL PROGRAMMABLE DC LINEAR POWER SUPPLIES (Up to 200W/CH)

The PDS series of multi-channel programmable dc linear power supplies is the only linear supply providing up to 350Vdc, 50Adc@maximum power of up to 1.75 ~ 2kW in a single 4U 19” rackmount box.  With AMREL’s multi-channel programmable linear power supply you have the flexibility to customize the voltage/power/current rating of numerous single supplies and combine them into a single system with up to is 8 channels per 4U box. The PDS multi-channel programmable linear power supply allows for expandability since the master/slave parallel multiple identically-rated systems and control up to 32 channels as a single unit via one GPIB, RS-232, or RS-485 address.

NH Research

NH Research, Inc. (NHR) designs and manufactures power electronics test instruments and complete turn-key test systems. Its products are used worldwide by manufacturers in the switching DC power supply, UPS, battery and battery charger industries. Applications typically involve either characterization or final test of customer products where a combination of advanced measurements, rapid test times and ease of setup & use are important. NHR has been in the power electronics test business for over 50 years (more about NHR) and has fully equipped facilities with highly skilled employees in Irvine, California and Shenzhen, China.

We have over 50 years experience working with, supporting and manufacturing power electronic test instruments and systems to some of the biggest names in the industry. Including, but not limited to:

Argonne Labs, BAE, Boeing, Chrysler, EADS, Ford, General Dynamics, General Electric, General Motors, Honeywell, Lockheed Martin, Mercedes-Benz, NASA, Northrop Grumman, NREL, Oak Ridge Labs, Raytheon, Sandia, Textron, UL, & UTC

NH Research, Inc. power electronics test systems and instruments deliver the power, precision and flexibility needed to meet or exceed your test solution needs.

Phone: 949-474-3900

Email Support Request Page

Products
Battery Test / Battery Emulation Testing Power Supply Test Systems
AC & DC Electronic Loads AC & DC Sources
AC & DC Regenerative Test Management Software

Social Media Streams

Connect, share, learn & start a discussion about NH Research, Inc. power electronics test systems & instruments through social media! NHR social media pages will keep you up to date with all the latest product news, information, overviews, tips, & upcoming industry events. So follow us on your preferred social media platform below!

Facebook

NH Research, Inc. on Facebook

  • “Like” our NHR business page to receive live news streams.
  • Receive updates on power electronic test systems & instruments, instantly!
  • Like us below:

Like NH Research, Inc.'s Facebook Page

Google+

NH Research, Inc. on Google+

  • Connect with NHR with full Google integration.
  • Live AMA Google Hangouts on NHR power electronic test systems & instruments!
  • Follow us below:

LinkedIn

NH Research, Inc. on LinkedIn

  • Follow the NHR company page for power electronic test system & instrument updates & discussion!
  • Connect & interact directly with the NHR team!
  • Follow us below:

Twitter

NH Research, Inc. on Twitter

  • Follow us, share, discuss & interact in realtime!
  • Receive updates on power electronic test systems & instruments, instantly!
  • Follow us below:

YouTube

NH Research, Inc. on YouTube

  • Subscribe to view all the latest product introduction, overview, & educational videos.
  • Ask our engineering experts questions!
  • Subscribe below:
 

DC Programmable Power Supplies

Sorensen DC Rack-Mounted, Bench-Top and Modular programmable power supplies

Model Voltage Current Power Overview
DLM 600 5V - 300V 2A - 75A 375W - 600W 1/2 Rack Programmable DC Power Supplies
XG 850 6V - 600V 1A - 110A 670W - 850W 1/2 Rack Programmable DC Power Supplies
XG 1500 6V - 600V 2A - 187A 1500W - 1560W 1500 Watt, 1U Programmable DC Power Supplies
XG 1700 6V - 600V 2A - 220A 1330W - 1710W 1700 Watt, 1U Programmable DC Power Supplies
XFR Series 6V - 600V 2A - 300A 1.2kW - 2.8kW Programmable Analog DC Power Supplies
DCS Series 8V - 600V 1A - 350A 1kW - 3kW DC Programmable Switching Supplies
DLM Series 5V - 600V 5A - 450A 3kW - 4kW Programmable DC Power Supplies
SG Series 10V - 800V 6A - 6000A 4kW - 150kW High Power Modular DC Power Supplies
SFA Series 60V - 160V 31A - 500A 5kW - 30kW High Slew Rate Current Source
ASD Series 40V–60V 167A–8000A 10kW–320kW Programmable Precision High Power DC Power Supply