Sorensen SGX Series 5kW-30kW high performance programmable DC power supply with intuitive touch screen controls.

Product Overview:

  • High Power Density: Up to 15 kW in 3U, 30 kW in a 6U chassis
  • Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Low Ripple and Noise
  • Intuitive Touch Screen Display
  • Parallelable up to 150 kW
  • Sequencing: Free system controller&speed up test
  • Low audible noise: Temperaturecontrolled variable speed fans

More

Sorensen Next Generation DC Supply

The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

At the heart of the SGX series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power.

Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current.

Advanced Intelligent Control

The SGX Series is operated from the intuitive, easy-to-use front panel touch screen display. Quickly access output programming parameters, measurements, sequencing, configuration and system settings from the touch screen interface. Functions and parameters can be directly selected from the touch screen or by using the encoder selector button. The control resolution is adjusted by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.

Additionally, the instrument can be controlled via LXI Ethernet and RS232 standard control interfaces, as well as through the optional GPIB control interface

SGX / SGI Comparison Chart
Feature SGX SGI
Modular Design
Fast Load Transient
Parallelable
Analog & Digital Summing
Direct Front Panel V/1 Control
Touch Screen  
Sequencing
Save / Recall Setups
System Power Readouts
Constant Power Mode
RS-232C Standard Standard
LXI Class C Ethernet Standard Optional
GPIB Optional Optional
Applications
Burn-In Compliance Testing
Materials Research Process Control
Product Validation Automotive Electronics
Rackmount ATE Systems Battery Charging
See the SFA product page for very high current slew rate and low stored energy applications.

More Product Information

  • Up to 15KW in 3U, up to 30KW in 6U
  • Easily parallel chassis for up to 150KW + 
  • Automatic Constant Voltage/Constant Current Cross Over
  • Fast load transient response: Protection from undesired voltage exursions
  • Optional Power Factor correction available at no charge: Power factor >0.9 typical
  • Optional Isolated Analog I/O available at no charge
  • Low audible noise: Temperature controlled variable speed fans

  • High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis
  • Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Low Ripple and Noise
  • Hardware Trigger (Ethernet Option)
  • Parallelable up to 150 kW
  • Sequencing: Free system controller & speed up test
  • Low audible noise: Temperature controlled variable speed fans

  • Precise programming of voltage and current slew rate for sensitive loads.
  • Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet) enable real-time digital control.
  • Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
  • Programmable analog interface scaling facilitates integrating the ASD FLX with existing systems easily.
  • Built-in energy meter calculates the delivered energy throughout a process or period of time.
  • Optional real time clock enables accurate timestamping of events.

  • Precise programming of voltage and current slew rate for sensitive loads.
  • Modules within one chassis can be connected to different loads and controlled independently.
  • Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet/IP (Industrial Protocol)) enable real-time digital control.
  • Built-in energy meter calculates the delivered energy throughout a process or period of time.
  • Optional real time clock enables accurate timestamping of events.
  • Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
  • Programmable analog interface scaling facilitates incorporating the ASD to existing systems with minimal effort.
  • Load impedance measurement, including rate-of-change calculations, enable load "state of health" monitoring and implementation of system preventive maintenance algorithms
  • Programmable filter bandwidth of the output voltage, current and power monitors let the user accommodate their response speed to particular needs.
  • Full featured GUI (Graphical User Interface) helps to test and debug the system by communicating with the power supply in real time.

  • Low noise
  • Excellent line⁄load regulation
  • Coarse and fine voltage controls
  • Constant voltage or constant current operation with automatic crossover and mode indication
  • Individual ON⁄Off switch per output (not including fixed output)
  • Switchable 3.3V⁄5V output on triple output model
  • Switchable remote sense (XPH 18­10 amd XPH 42­10 models)

  • High Power Density : 3 kW and 4 kW models, 2U (3½” high), (19” wide); no top or bottom clearance spacing required
  • Preview Push-button : Overvoltage protection (OVP), voltage and current preview buttons
  • Remote Voltage Sense : Sense leads are easily connected to a solderless connector
  • Parallel or Series Operation Field configurable
  • Power Factor Correction ≥0.98 1 Ф 3kW

  • High Power Density: Up to 15 kW in a 3U / 30 kW in a 6U chassis
  • Wide Voltage Range: 0-40V up to 0-600V, in increments of 5 kW from 5 to 30 kW
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Low RMS and P-P Noise: Suitable for the most sensitive applications
  • Parallelable up to 150 kW: Expandable as your requirement grows
  • Modular Design: Upgradeable for the ultimate in investment protection
  • Sequencing: Program custom waveforms
  • Easy-to-read Fluorescent Display: SGI supports English, French, German, Italian, Spanish, Chinese, Japanese, and Korean languages
  • 16-bit Resolution: Optional IEEE-488.2 + RS-232C + Ethernet provides precise control
  • Ethernet Control: LXI Class C compliant communication through integrated web server
  • Direct Relay Control: Control output and sense isolation relays, along with polarity relays. (Ethernet Option Only)
  • Hardware Trigger: Ethernet Option Only
  • 5 Year Warranty

  • Analog Programming
  • Constant Voltage or Constant Current Operation
  • LabView® and LabWindows® Drivers
  • Standby Mode
  • Front Panel Button Preview of Voltage, Current, OVP
  • CE, CSA, UL Approvals

  • High power density / low ripple and noise
  • High programming resolution with Ethernet interface
  • Constant voltage and current mode
  • Remote sensing
  • Isolated analog control and monitoring (optional)

AMETEK Programmable Power

 

Customer Service: repair.ppd@ametek.com

Phone: 858-458-0223

Fax: 858-678-4482

Service Centers

Products
Programmable DC Power Supplies Bench-Top Programmable DC Power Supplies
Programmable AC Sources Programmable DC Loads
Programmable AC Loads Test Compliance
Custom Power Solutions Modular AC/DC Power Systems

DC Programmable Power Supplies

Sorensen DC Rack-Mounted, Bench-Top and Modular programmable power supplies

Model Voltage Current Power Overview
DLM 600 5V - 300V 2A - 75A 375W - 600W 1/2 Rack Programmable DC Power Supplies
XG 850 6V - 600V 1A - 110A 670W - 850W 1/2 Rack Programmable DC Power Supplies
XG 1500 6V - 600V 2A - 187A 1500W - 1560W 1500 Watt, 1U Programmable DC Power Supplies
XG 1700 6V - 600V 2A - 220A 1330W - 1710W 1700 Watt, 1U Programmable DC Power Supplies
XFR Series 6V - 600V 2A - 300A 1.2kW - 2.8kW Programmable Analog DC Power Supplies
DCS Series 8V - 600V 1A - 350A 1kW - 3kW DC Programmable Switching Supplies
DLM Series 5V - 600V 5A - 450A 3kW - 4kW Programmable DC Power Supplies
SG Series 10V - 800V 6A - 6000A 4kW - 150kW High Power Modular DC Power Supplies
SFA Series 60V - 160V 31A - 500A 5kW - 30kW High Slew Rate Current Source
ASD Series 40V–60V 167A–8000A 10kW–320kW Programmable Precision High Power DC Power Supply