Teledyne LeCroy HDO9000 / HDO9000-MS 1 GHz - 4 GHz 10-bit High Definition Oscilloscopes

Product Overview:

  • 10 bit resolution; up to 13.8 bits with Optimized Filtering
  • 1 GHz- 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • 15.4" capacitive touch screen
  • MAUI with OneTouch
    • Designed for touch
    • Built for simplicity
    • Made to solve
  • Advanced Tools
    • Jitter and Timing Analysis Capabilities
    • WaveScan – Search and Find
    • LabNotebook Documentation and Report Generation
    • History Mode – Waveform Playback
  • Optional Software Packages
    • Advanced Customization
    • Digital Filtering
    • Spectrum Analysis
    • Device and Switching Power Supply Analysis
    • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • 16 digital channels with 1.25 GS/s
    • Analog and Digital Cross-Pattern Triggering
    • Digital Pattern Search and Find
    • Analog and Digital Timing Measurements
    • Logic Gate Emulation
    • Activity Indicators

The HDO9000 with HD1024 Technology provides exceptional signal fidelity with 10-bit resolution, 4 GHz bandwidth and a superior oscilloscope experience to deliver faster time to insight.
HD1024 High Definition Technology

HD1024 high definition technology enables 10 bits of vertical resolution with 4 GHz bandwidth. The HDO9000 automatically and dynamically determines the best ADC configuration under each specific measurement condition to always provide the optimal resolution.

Dynamic ADC Reconfiguration

HD1024 technology enables dynamic reconfiguration of the ADC to achieve 10 bits of vertical resolution. By automatically determining the best ADC configuration under each specific measurement condition, the HDO9000 always provides the optimal resolution.

Optimized Filtering

HD1024 high definition technology makes use of optimized filtering to provide additional resolution beyond 10-bits; extending up to 13.8 bits. When operating in low sample rate conditions, an anti-aliasing filter is automatically applied to reduce excess out-of-band noise. Additionally, resolution can be improved by applying a manual bandwidth limit on an individual channel.

Superior User Experience

The HDO9000 and MAUI with OneTouch allows users to perform all common operations with a single touch of the display, optimizing for convenience and efficiency. Meanwhile, the 15.4” high resolution capacitive touch screen’s bright display and quick responsiveness further enhances the inherent efficiency and intuitiveness of MAUI with OneTouch.

MAUI with OneTouch

The HDO9000 and MAUI with OneTouch sets the standard for oscilloscope user experience by providing the most unique touch features on any oscilloscope. Common gestures are used to instinctively interact with the oscilloscope and dramatically reduce setup time. Convenience and efficiency are optimized - all common operations can be performed with one touch and do not require opening and closing of pop-up dialogs or menus.

Powerful, Deep Toolbox

The standard collection of math, measurement, debug, and documentation tools provides unsurpassed analysis capabilities. Application-specific packages enable streamlined debugging for common design/validation scenarios. The advanced customization option (XDEV) enables user-defined parameters and math functions providing unique and limitless analysis capability.

Exceptional Serial Data Tools

A wide a variety of application packages are available to meet all serial data test challenges, ranging from automated compliance packages to flexible debug toolkits. A suite of protocol specific measurement and eye diagram packages are available to complement the industry’s most intuitive trigger and decode packages.

Integrated Mixed Signal Capabilities

The HDO9000 High Definition Oscilloscopes offer powerful mixed signal solutions that combine high definition analog channels with the flexibility of digital inputs. The HDO9000-MS models are equipped with an integrated 16 digital channels and a 1.25 GS/s sampling rate which creates an all-in-one debug machine.

High-speed Digital Analyzer

For applications demanding even higher-performance mixed-signal acquisition capabilities, the HDA125 High-speed Digital Analyzer can be easily added to the HDO9000. With 12.5 GS/s digital sampling rate on 18 input channels and the revolutionary QuickLink probing solution, validation of challenging interfaces such as DDR memory has never been simpler or more comprehensive.

Serial Trigger, Decode, Measure/Graph, and Eye Diagrams

Isolate events using the serial bus trigger and view color-coded protocol information on top of analog or digital waveforms. Timing and bus measurements allow quick and easy characterization of a serial data system. Serial (digital) data can be extracted and graphed to monitor system performance over time. Identify physical layer anomalies with eye diagram mask testing and mask failure locator.


LabNotebook automatically saves all displayed waveforms, oscilloscope setup file, and a screen with a single button press, eliminating the need to navigate multiple menus to save all these files independently. Report files can be annotated and shared with colleagues to fully document all results.

Q-Scape Multi-tab Display Architecture

Unique Q-Scape multitab display architecture speeds your understanding of your design with 4x the display area. Acquired or calculated waveforms can be located on any of four different “tabbed” oscilloscope grid displays, with individually selectable grid styles available for each tab. Quickly move waveforms to different tabs through drag-and-drop.

Jitter and Timing Analysis Option

JITKIT makes it simple and easy to understand the basic system jitter performance of clock signals and clock-data activities, including period, half period, cycle-cycle, skew, amplitude, differential voltage crossing, slew rate, and a wide variety of other common jitter measurements.

XDEV Advanced Customization Option

With the XDEV option, third party programs can be completely integrated into the oscilloscope’s processing stream. Create customized math functions and parameters using C/C++, MATLAB, Excel, JScript or Visual Basic without ever leaving the oscilloscope application - and view the results directly on the oscilloscope, in real-

Main Specifications

Bandwidth 1 GHz - 4 GHz
Starting from $21,300
Standard Memory 128 Mpts
Max Sampling Rate 20 GS/s - 40 GS/s
Input Channels 4
Resolution 10-bit

More Product Information

  • 8 analog channels
  • 12-bit ADC resolution, up to 15-bit with enhanced resolution
  • 350 MHz, 500 MHz and 1 GHz bandwidths
  • Long Memory – up to 250 Mpts/Ch
  • 16 Digital Channel MSO option
  • Serial Data Toolsets
    • Trigger
    • Decode
    • Measure/Graph
    • Eye Diagram
  • Q-Scape™ Multi-tab display architecture
  • 12.1” WXGA multi-touch screen display with Ultra HD (UHD) 3840 x 2160 pixel extended-desktop mode
  • Wide probe selection for power electronics, embedded electronics, and mechatronics applications
  • Advanced analysis and reporting toolsets
  • Advanced Triggering supplemented with TriggerScan and Measurement Trigger

  • HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
  • Up to 5 Gpts of acquisition memory enables detailed viewing of long events
  • 15.6" 1900 x 1080 Full HD capacitive touchscreen
  • New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
  • MAUI with OneTouch user interface for intuitive and efficient operation
  • Deep toolbox enables and simplifies complex analysis
  • Intuitive navigation to quickly find important features in long waveforms

  • Up to 100 GHz Industry leading analog bandwidth
  • Acquisition module configurations with up to:
    • 4 channels at 36 GHz
    • 2 channels at 65 GHz
    • 1 channel at 100 GHz
  • Up to 240 GS/s sample rate
  • Long Memory - Up to 1.5 Gpt/ch
  • Modular Design - build a system with up to 20 acquisition modules, for:
    • 80 channels at 36 GHz
    • 40 channels at 65 GHz
    • 20 channels at 100 GHz
  • ChannelSync™ Architecture for 130 fs matching between channels
  • Multi-Lane eye, Jitter and Noise Analysis with SDAIII-CompleteLinQ
  • Optical Modulation Analysis with Optical-LinQ
  • PAM4 Eye, Jitter and Noise Measurements with PAM4 Signal Analysis
  • Industry’s only true hardware 14.1 Gb/s serial trigger
  • Add 12.5 GS/s mixed-signal capability at any time with the HDA125 high-speed digital analyzer

  • Up to 30 GHz bandwidth and 80 GS/s sample rate
  • Most advanced oscilloscope user interface makes configuring complex measurements easy
  • The industry’s only true hardware 14.1 Gb/s serial pattern trigger
  • Add the Teledyne LeCroy HDA125 High-speed Digital Analyzer to create the most powerful, flexible mixed-signal test solution available
  • Low Jitter Measurement Floor and exceptional timebase stability
  • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility
  • Integrated standard and custom measurements and math functions for unrivaled analysis capability
  • Multi-lane serial data eye, jitter and crosstalk analysis

  • Single-ended and differential measurements
  • Fast step (20 ps rise time)
  • Sub-millimeter measurement resolution
  • Advanced OSL (Open Short Load) calibration removes effects of cables, fixtures, etc.
  • TRUE differential TDR/TDT
  • Automated deskew
  • Accurate S-parameter measurements to 20 GHz
  • Data output in Voltage, Impedance, or S-parameter (SnP) format
  • Fully integrated TDR analysis with S-parameter analysis

  • 12-bit ADC resolution up to 15-bit with ERES
  • 400 MHz and 600 MHz models
  • 256 Mpts/Ch
  • ±0.5% F.S. DC gain accuracy
  • 55 dB SNR
  • 1 mV vertical Sensitivity @ full bandwidth
  • Up to ±400 V offset capability 
  • 20 MHz, 100 MHz, 200 MHz, 350 MHz filters for additional noise filtering

The WaveJet 300A provides the banner specifications, feature set and user interface to simplify how you work and shorten debug time. With a big, bright 7.5" display, long 500 kpts/Ch memory and up to 2 GS/s you will easily capture and see every detail of your waveform. The USB ports provide a quick way to save waveforms, store or print screen captures or connect to a PC. Math and measurement tools help you understand the waveforms and Replay mode allows you to look at a history of what has been captured. Altogether these specs, features and capabilities make the WaveJet 300A the right oscilloscope for your debugging needs.

Main Specifications

Bandwidth 100 MHz - 500 MHz
Starting from $4,000
Standard Memory 500 kpts
Max Memory 500 kpts/ch
Max Sampling Rate 2 GS/s
Input Channels 2, 4
Resolution 8-bit

  • Up to 45 GHz
  • Up to 80 Channels @ 20 GHz
  • Up to 120 GS/s
  • Up to 768 Mpts/Ch

LabMaster 9 Zi-A modular oscilloscope systems completely re-define oscilloscope performance and capabilities.

  • Multi-channel operation at the highest bandwidths
    • 20 channels @ 45 GHz
    • 40 channels @ 36 GHz
    • 80 channels @ 20, 16, or 13 GHz
  • Bandwidth and channel upgrade flexibility
  • ChannelSync for precise synchronization of all acquisition modules
  • Server-class CPU (33.6 GHz effective clock rate, up to 192 GB RAM)
  • Ultra-low jitter noise floor (125 fs rms) and ultra-high time base stability.

  • Teledyne LeCroy’s unique summary view displays the Eye Pattern, TIE, Bathtub Curve and Jitter Histogram all on the screen at the same time
  • De-embed cables allow all of the SDA tools to be used as if the cables were not in the system
  • Create Eye Patterns utilizing the full memory for maximum statistical significance
  • Display Eye Patterns up to 100 times faster than other solutions
  • Trigger on 80-bit patterns at up to 3.125 Gb/s using the Serial Trigger
  • Decode 8b/10b data on up to 4 lanes simultaneously
  • Configure software PLL for any standard or custom requirement
  • Serial data compliance testing
    • 10/100/1000 BaseT ENET
    • USB 2.0
    • MIPI D-PHY
    • DDR2 / DDR3
    • PCI Express
    • DisplayPort
    • SAS
    • HDMI
    • UWB
    • SATA

Teledyne LeCroy

Phone: 800-553-2769 or 845-425-2000

Fax Sales: 845-578-5985

Email Support: (Oscilloscopes, Waveform Generators, Signal Integrity)

Email Sales:

Phone Support: 1-800-553-2769

Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities - typically tailored to enhace the productivity of engineers inspecific applications areas such as serial data test, disk drive test and automotive bus analysis. 
Oscilloscopes Bandwidth Input Channels Resolution Max Sampling Rate Memory
350 MHz - 500 MHz 4 8-bit 2 GS/s 5 Mpts
200 MHz - 750 MHz 2,4 8-bit 4 GS/s 10 Mpts
200 MHz - 1 GHz 4 8-bit 10 GS/s 16 Mpts - 32 Mpts
1 GHz 4 8-bit 10 GS/s 16 Mpts - 32 Mpts
1GHz 4 8-bit 10 GS/s 16 Mpts - 32 Mpts
200 MHz - 1 GHz 4 12-bit 10 GS/s 12.5 Mpts - 25 Mpts
400 MHz - 4 GHz 4 8-bit 40 GS/s 16 Mpts - 64 Mpts
500 MHz - 4 GHz 4 8-bits 20 GS/s - 40 GS/s 32 Mpts - 128 Mpts (Interleaved)
350 MHz - 1 GHz 4 12-bit 10 GS/s 50 Mpts - 250 Mpts
350 MHz - 1 GHz 8 12-bit 10 GS/s 50 Mpts - 250 Mpts
350 MHz - 1 GHz 8 12-bit 10 GS/s 50 Mpts - 250 Mpts
1 GHz - 4 GHz 4 10-bit 20 GS/s - 40 GS/s 128 Mpts
1 GHz 4 10-bit 20 GS/s - 40 GS/s 128 Mpts
3.5 GHz - 6 GHz 4 8-bit 40 GS/s 32 Mpts - 256 Mpts
2.5 GHz - 6 GHz 4 8-bit 40 GS/s 32 Mpts - 256 Mpts
1.5 GHz - 6 GHz 4 8-bit 40 GS/s 20 Mpts - 256 Mpts
4 GHz - 30 GHz 4 8-bit 80 GS/s 32 Mpts - 512 Mpts
13 GHz - 30 GHz 4 to 80 8-bit 120 GS/s 20 Mpts - 768 Mpts
20 - 100 GHz 4 to 80 8-bit 240 GS/s 20 Mpts - 1024 Mpts