Teledyne LeCroy - PPE6KV 1000:1 400 MHz 50M Ohm High-Voltage Probe
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
Main Specifications |
|
Bandwidth | 400 MHz |
Attenuation | 1000:1 |
Probes |
|
Probe Ring | Yes |
Physical Dimensions |
|
Cable Length | 2m |
More Product Information
-
6 kV CAT safety rated
-
Widest differential voltage range available
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
-
Static power analysis - like a dedicated power analyzer
-
Dynamic power analysis – capture more information
-
Complete test coverage – control system, power section, motor
-
Comprehensive mechanical interface
-
Harmonics calculation option
-
Vector display option (THREEPHASEVECTOR)
-
Waveform Transformations option (THREEPHASEdq0)
-
16 Channels with OscilloSYNC™
-
Up to seven operating modes: T3EL15060P & T3EL50015P - CC, CV, CR, CP, CC + CV, CR + CV, CP + CV. T3EL150302P & T3EL150303P – CC, CV, CR, CP.
-
Static, Dynamic and Sequence mode support.
-
Built in Application Functions: T3EL15060P & T3EL50015P - Soft Start, Battery Test Automation, OCP and OPP Test Automation. T3EL150302P & T3EL150303P – Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test.
-
Provides a load of up to 300 Watts.
-
Programmable and analog external control.
-
Up to 30 GHz bandwidth and 80 GS/s sample rate
-
The most advanced oscilloscope user interface
-
The industry’s only true hardware 14.1 Gb/s serial trigger
-
Low Jitter Measurement Floor and exceptional timebase stability
-
Comprehensive set of serial data analysis, debug, validation and compliance tools
-
Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility
-
Integrated standard and custom measurements and math functions for unrivaled analysis capability
-
Multi-lane serial data eye, jitter and crosstalk analysis
-
Real-time de-embedding, emulation, and equalization
-
Applications
-
Upper-side gate drive signal measurements
-
Floating control signal or sensor voltage measurements
-
EMC, EFT, ESD, and RF immunity testing and system optimization
-
Any small signal measurements with high common-mode voltage
-
60 MHz bandwidth
-
35 kV common-mode voltage rating (fiber optic isolation)
-
Superior Noise and Rejection
-
140 dB CMRR
-
Low loop inductance
-
Low attenuation
-
-
Reduced DUT loading, better pulse response compared to conventional HV differential probes
-
Selectable tips from ±1V to ±40V
-
Eliminates need to “float” the oscilloscope
-
ProBus-compatible with many Teledyne LeCroy oscilloscopes
-
150 MHz, 2 analog channels
-
8 synchronized digital channels (T3AWG2152-D only)
-
16-bit vertical resolution
-
128 MPts @Ch waveform memory
-
Max sampling rate of 600 MS/s
-
Provides a passive PCIe® backplane for test applications
-
Self-contained, portable and selfpowered
-
Supplies power for +3.3V, +3.3Vaux and +12V rails
-
Generates PCIe reference clock
-
Accepts external clock inputs
-
Generates valid PERST# bus reset that can be activated by manual push button
-
Includes two mid-bus probe footprints for traffic monitoring
-
Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
-
Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
-
Supports data rates of 2.5 GT/s and 5.0 GT/s
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)