VTI Instruments EX1629 Strain Gage Measurement Instrument

Product Overview:

  • Supports quarter-bridge (120, 350Oor user defined), half-bridge or full-bridge
  • 24-bit ADCs, sampling rates up to 25 kSa/s
  • Built in programmable differential excitation -8V to 8V
  • Built in selectable bridge completion
  • Configure signal conditioning excitation and bridge completion on a per channel basis
  • Simple, low-cost wiring using RJ-45 telecom connectors
  • Supports TEDS for easy transducer detection and setup
  • RJ-45 input connector reduces setup cost and time
  • Built in self-calibration and shunt calibration
  • Supports voltage, ratiometric and linear measurements other than strain measurements.

More

The 48-channel EX1629 sets a new standard of performance for stress and fatigue testing. Independent 24-bit ADCs converters on each channel, extensive software-selectable filtering, and independent signal conditioning paths provide exceptional accuracy and reliability.

The EX1629 is designed to make it very simple for the user to plugin the transducer and start taking accurate measurements immediately.

Any Channel, Any Bridge or Voltage Input

The EX1629 supports quarter-bridge (120 O, 350 O or user defined), half-bridge or full-bridge transducers, as well as voltage, ratiometric and linear measurements

Easy setup – just plugin and measure

With built-in signal conditioning, programmable excitation and selectable bridge completion all integrated into the unit and configurable per channel, the user can simply plugin the transducer and start making measurements.

Combine and Measure 10,000+ Channels

Multiple EX1629s are easily synchronized together in a master-slave relationship via the LXI external trigger bus. In addition TEDS support greatly simplifies transducer identification and instrument configuration. RJ-45 connectivity reduces cost of cabling and simplifies wiring efforts.

Accuracy and Reliability you can trust

With unmatched performance, accuracy and reliability, the EX1629 is the go-to solution for the most complex structural test applications worldwide. See our case-studies to learn more.

 
00:00
 
00:00
 
00:00

More Product Information

  • 48 thermocouple channels
  • Very high-performance thermocouple measurements, <0.3° C accuracy
  • Supports all thermocouple types
  • Built in cold junction compensation, open transducer detection, self-test and self-calibration
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Standalone, compact 1U footprint
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements
  • Unlimited expansion for High-Channel counts
  • Mini-TC connectors for simplified transducer connectivity

  • 48 voltage channels
  • Supports wide range of static measurements and transducer types including thermocouples, RTDs, thermistors, strain gauge, pressure transducers, etc. using EX10SC signal conditioning modules
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Programmable low pass filter per channel
  • Standalone, compact 1U footprint
  • Voltage ranges ±10 V, ±1V, ±0.1V, ± 0.067V and ± 0.01V
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements
  • Unlimited expansion for High-Channel counts
  • Built in self-test and self-calibration

  •  Typical accuracies of ±0.20°C
  • 16-channel isolated universalt hermocouple/voltage inputs
  • Power over Ethernet (PoE)
  • 20K samples/second/channel sample rate
  • 24-bit ADC per channel
  • 500 V channel-ground isolation
  • 1000 V channel-channel isolation
  • Data logger acquisition mode
  • Built-in parallel data streaming
  • Full-featured embedded web interface
  • LXI Ethernet interface
  • 8-bit bank isolated digital I/O
  • Compact 1U half-rack form factor

  • 48 thermocouple and voltage channels
  • Very high-performance thermocouple measurements, <0.3° C accuracy
  • Supports all thermocouple types
  • 10-34 V DC powered with extended temperature range for harsh testing in harsh environments.
  • Built-in cold junction compensation, open transducer detection, self-test and self-calibration
  • Supports wide range of static measurements and transducer types including thermocouples, RTDs, thermistors, strain gauge, pressure transducers, etc. using EX10SC signal conditioning modules
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Standalone, compact 1U footprint
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements

  • 32 thermocouple channels, 16 voltage channels
  • Very high-performance thermocouple measurements, <0.3° C accuracy
  • Supports all thermocouple types
  • Built in cold junction compensation, open transducer detection, self-test and self-calibration
  • Supports wide range of static measurements and transducer types including thermocouples, RTDs, thermistors, strain gauge, pressure transducers, etc. using EX10SC signal conditioning modules
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Standalone, compact 1U footprint
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements
  • Unlimited expansion for High-Channel counts

  • 16 thermocouple channels, 32 voltage channels
  • Very high-performance thermocouple measurements, <0.3° C accuracy
  • Supports all thermocouple types
  • Built in cold junction compensation, open transducer detection, self-test and self-calibration
  • Supports wide range of static measurements and transducer types including thermocouples, RTDs, thermistors, strain gauge, pressure transducers, etc. using EX10SC signal conditioning modules
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Standalone, compact 1U footprint
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements
  • Unlimited expansion for High-Channel counts

  • 48 thermocouple and voltage channels
  • Very high-performance thermocouple measurements, <0.3° C accuracy
  • Supports all thermocouple types
  • Built-in cold junction compensation, open transducer detection, self-test and self-calibration
  • Supports wide range of static measurements and transducer types including thermocouples, RTDs, thermistors, strain gauge, pressure transducers, etc. using EX10SC signal conditioning modules
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Standalone, compact 1U footprint
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements
  • Unlimited expansion for High-Channel counts

  • First integrated data acquisition instrument to support IEPE, charge, and voltage inputs
  • 625 kSa/s/channel, 24-Bit ADC, 4-Channel
  • Flexible analog and user defined digital filter combinations
  • True differential inputs with 25 V Isolation
  • Exceptional noise immunity
  • Highest quality instrumentation grade ADC's outperform commonly used audio grade ADC's
  • Fully programmable excitation (2 mA to 20 mA)
  • Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response

A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.

VTI Instruments

VTI Instruments delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications. The company’s products and systems are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems.

VTI is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables VTIs customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.

VTI has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics. The Company’s products are used in applications ranging from wing test on Boeing 787 to production test for cell phones.

Contact Support Request Form Page

Download corporate presentation

VTI Instruments YouTube Channel

Products
LXI Switching / Instrumentation - EX1200 Series LXI Data Acquisition - EX10XXA / EX10SC Series
LXI Microwave Solutions - EX7000 Series LXI Bridge / Strain - EX1629
PXIe Switching - SMX Series PXIe DSA - EMX Series
PXIe Chassis - CMX Series PXI Computer / Chassis - PMX Series

Mainframes
Model Description
CMX09 9-Slot 3U PXI Express Chassis, up to 8 GB/s
CMX18 18-Slot 3U PXI Express Chassis, up to 8 GB/s
CMX34 Integrated PXIe/LXI subsystem with receiver interface mechanism

Controllers
Model Description
EMX-2500 Gigabit Ethernet System Controller for PXIe Mainframes
EMX-2401 Intel Core i5 2.4 GHz, 8GB RAM, 160 GB hard drive, PXIe embedded controller
PXIe-PCIe8361 1 lane Gen 1 PCIe host w/3m copper cable, 200MB/s thru-put
PXIe-PCIe8381 PCI Express (x8 Gen 2) Control of PXI Express, 3.2 GB/s Practical Throughput
PXIe-PCIe8388 PCI Express (x16 Gen 2) Control of PXI Express, 5.6 GB/s Practical Throughput
PXIe-6674T PXI Express Timing and multichassis synchronization module

Digitizers
Model Description
EMX-4350 625 kSa/s DSA Instr., 4 Ind. Diff. Ch., 24-bit Digitizer
EMX-4380 625 kSa/s DSA Instr., 4 Ind. Diff. Ch., 24-bit Digitizer, w/ charge inputs
EMX-4250 204.8 kSa/s DSA Instr., 16 Ind. Ch., 24-bit Digitizer
EMX-4251 204.8 kSa/s DSA Instr., 8 Ind. Ch, 24-bit Digitizer
EMX-4016 16 channel, rackmount breakout box for use with EMX-4250
EMX-4008 8 channel breakout box for use with EMX-4251
PXI-2005 4-CH, 500KS/s Simultaneous A/D Multi-function PXI-H Module
PXI-2010 4-CH, 2MS/s Simultaneous A/D Multi-function PXI-H Module
PXI-2022 16-CH 16-Bit 250 KS/s Simultaneous Sampling, PXI-H Module
PXI-2204 64-CH, 3MS/s 12-bit Multi-function PXI-H Module
PXI-2205 64-CH, 500KS/s 16-bit Multi-function PXI-H Module
PXI-9846D High Resolution PXI-H Digitizer, 4CH 16-bit 40MS/s with 512MB SDRAM
PXIe-9848 8-CH 14-Bit 100MS/s High Speed PXI Express Digitizer

Switch Cards
Model Description
SMX-2002 10 channel, 16 A SPDT switch
SMX-3276 152 channel, 300 V/2A Multiplexer
SMX-4410 160 crosspoint, four (4x10)s, 300V/2A Matrix
SMX-5001 80 ch 300 V/2 A SPST switch
SMX-6301 Four SP4T multiplexer tree, 3 GHz
SMX-6301T Four SP4T multiplexer tree, 3 GHz w/ 50ohm Termination
SMX-7121 1-slot microwave switch, single SPDT, 26.5 GHz
SMX-7122 1-slot microwave switch, dual SPDT, 26.5 GHz
SMX-7200 Pass through adapter, 6 drive lines

Waveform Generators
Model Description
EMX-1434 204.8 kSa/s Arb. Waveform Source, 4 Ind. Ch., Integr. Tach.
PXI-2502 8-CH, 1MS/s analog output multi-function PXI-H Module

DMM
Model Description
M9183A PXI-H Digital Multimeter, 6½ digit, Enhanced Performance

Communication Buses
Model Description
PXI-C429-4 4 Channel ARINC-429 on PXI-H
PXI-C429-8 8 Channel ARINC-429 on PXI-H
PXI-C429-16 16 Channel ARINC-429 on PXI-H
PXI-C429-32 32 Channel ARINC-429 on PXI-H
PXI-C1553-1 Single 1553 Channel on C-size PXI-H
PXI-C1553-2 Dual 1553 Channel on C-size PXI-H
PXI-C1553-4 Quad 1553 Channel on C-size PXI-H