Yokogawa - CA300 Series Process Calibrator

Product Overview:

The CA300 Series is a high accuracy source and measure portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing. Available in 3 models, the CA310, CA320, and CA330 provide an ergonomic and friendly user-interface making it easy to use.

More

Step Sweep Function

Sources by 25% step automatically from 0% to 100% of span, which improves efficiency of operation. It can correspond to various response times of field devices. (15/30/45/60 seconds)

CA500 Step Sweep

Manual Step Function

Sources by 25% step manually from 0% to 100% of span.

CA300 Manual Step Function

Linear Sweep Function

Sources continuously from 0% to 100% and is capable to check meter and make linearity tests. Sweep time can be selected by 15/30/45/60 seconds.

CA300 Linear Sweep Function

Span check function

Switches sources 0%↔100% by one touch. With this function, it makes it simple to make adjustment and to inspect the open and close operation of valves.

CA500 Span Check

20mA SIMULATE

CA310 is capable to execute a loop check by simulating a transmitter, sinking the current signal from the external source (distributor). It achieves the high accuracy 0.015% of setting to source 4-20mA.

CA300 20MA Simulate

Signal Conditioners:

http://www.yokogawa.com/ns/cis/juxta/ns-index_juxta.htm

Two-wire Transmitter Loop Check

DC mA signals can be measured by supplying power to the transmitter from a 24 V DC power supply. DC mA measurement and zero-point check can be performed with an accuracy of 0.015% of reading. A 250-ohm resistor for HART and BRAIN communication is included in this calibrator so there is no need to attach an external resistor when connecting to a handy terminal.

CA300 Loop Check

TC SIMULATE

CA320 corresponds to 16 types of TC for sourcing. It achieves the high basic accuracy of 0.5°C (typical of type K), three times better than the previous model which enables it to operate a highly reliable test. Additionally, the difference of temperature between objects can be compensated, by using external RJ sensor or a compensating lead wire.

CA300 TC Simulate

Digital Indicating Controller:

http://www.yokogawa.com/ns/cis/utup/ns-index_utup.htm



Signal Conditioners:

http://www.yokogawa.com/ns/cis/juxta/ns-index_juxta.htm

TC MEASURING

CA320 can measure the output of TC like a thermometer. It achieves the basic accuracy of 0.5°C (typical of type K), three times better than the previous model and is for multiple use for process temperature measuring by corresponding to 16 types of TC.

CA300 TCMeasuring

RTD SIMULATE

CA330 corresponds to 14 types of RTD for sourcing. It achieves the high basic accuracy of 0.3°C (typical of type PT100), twice better than the previous model which enables it to operate a high reliable test.

CA300 RTD Simulate

Digital Indicating Controller:

http://www.yokogawa.com/ns/cis/utup/ns-index_utup.htm



Signal Conditioners:

http://www.yokogawa.com/ns/cis/juxta/ns-index_juxta.htm

RTD MEASURING

CA330 can measure the output of RTD like a thermometer. It achieves the basic accuracy of 0.3°C (typical of type PT100), twice better than the previous model and is for multiple use of process temperature measuring by corresponding to 14 types of RTD.

CA300 RTD Measuring

CA310 Features

CA310 Front Feature

Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)  

20 mA SIMULATE (SINK) function

Simultaneously supplies 24V loop power and measure output signal with high accuracy

HART/BRAIN comm. resistance (250Ω) embedded

Sub display displays span% of the source value

Corresponds to various types of source pattern

(Step sweep/ Linear sweep/ Manual step/ Span check)

CA320 Features

CA320 Front Feature

Basic accuracy: 0.5°C

(Typical of TC type K)

*Including accuracy of internal RJC

Corresponds to 16 types of TC standard

(JIS/IEC/DIN/ASTM/GOST R)

Sub display displays value of voltage source and span%

Corresponds to various types of source pattern

(Step sweep/ Linear sweep/ Manual step/ Span check)

Corresponds to other TC types by mV source function

Measures TC sensor output as a thermometer

CA330 Features

CA330 Front Feature

Basic accuracy: 0.3°C 

(Typical of PT100)

Corresponds to 14 types of RTD standard 

(JIS/IEC/GOST R)

Sub display displays value of resistance source and span%

Corresponds to various types of source pattern

(Step sweep/ Linear sweep/ Manual step/ Span check)

Corresponds to 2,3,4 wire. Realizes RTD simulation

Measures output of RTD sensor as a thermometer

Addition of Sub Display

The sub display additionally shows span%, source value of voltage or resistance, while the main display shows the setting value.

CA300 Sub Display

Corresponds to 2WAY Power Supply

Power is supplied by AA Alkaline batteries or an AC Adapter

CA300 2WAY Power Supply

More Product Information

The Yokogawa CA450 Process Multimeter is a portable test instrument to combine a digital RMS multimeter and a loop calibrator to give process technicians the same functionality in one tool. The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor. Process technicians can now do the same job while carrying less equipment.

Built upon the technology of its predecessor, the 2558A, the LS3300 is an AC signal generator capable of outputting both current and voltage simultaneously, thus allowing it to calibrate power meters. Providing output ranges of  10mV-1250V, and 0.3 mA to 62.5 A, and upto 78.125 kW, the unit is capable of calibrating up to 0.15 % Class Power meters. New features on the LS3300 include a high definition LCD display, a vector diagram, and the ability to synchronize up to three units to emulate anything from single phase two wire to three phase four wire systems.

  • Accuracy 0.01% rdg for Pressure / 0.015% rdg for Current/Voltage (source/measurement)
  • Highest resolution class 0.001kPa (200.000 kPa range) 0.0001 psi (29 psi range)
  • “As Found”, “As Left”  and error rate (%)
  • IP54 dustproof and water proof case for harsh environments
  • 4-20mA step function for signal generation
  • 20mA Simulator to carry out loop test. 
  • Two-wire Transmitter Loop Check
  • 250-ohm resistor for HART and BRAIN communication

The 2553A Precision DC Calibrator, like our other Calibrators and Sources, offers users the simple operation and reliability they have come to trust from Yokogawa.
  • Digital Display of Output
  • High Basic Accuracy
  • High Stability and Low Noise
  • High Resolution
With output ranges of ±10 mV to ±30 V and ±1 mA to ±100 mA plus 10 different types of Thermocouples and Pt100 RTD, the 2553A can effectively solve the calibration requirements for DC Analog Meters and various temperature measuring instruments and controllers.

  • Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
  • Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse
  • Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function
  • Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable

Signal source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Measurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Features: Highly accurate within 0.02% of the DC voltage range for source and measure.
Source and measurement can be performed simultaneously. Vertical type with large-screen display.Loop power supply function (24 VDC at a load of up to 22 mA)
It is possible to measure current in the mA range while supplying power.Sink function. Sweep functions that allow 3 types of continuous outputs.
Options: 94010 AC adapter, 94015 NiMH Battery, 93027: Main Body case with strap

The Model 2560A is a simple, precise and cost effective solution for calibrating DC measuring instruments such as analog meters, thermometers, temperature transmitters and data loggers
The 2560A Precision DC Calibrator offers high voltage and high current generation and intuitive operation for the analog meters calibration.
  • Wide output range of voltage and current generation
  • Dials and switches for each digit and function
  • High accuracy, stability, and resolution
  • Various effective functions for analog meters calibration.
With output ranges of 100 mV to 1000 V and 100 µA to 30A, plus 10 different types of Thermocouples and Pt100 RTD, the 2560A can effectively solve the calibration requirements for DC Analog Meters and various temperature measuring instruments and controllers.

When the software program starts, the front panel image of the connected DL or WT (control panel) appears on the monitor of your PC. You can control the DL or WT from your PC with the mouse to simulate operations using the front panel keys of the instrument.
Wirepuller is a windows based Yokogawa software program that enables you to control DL Series Oscilloscopes1 or WT1600 Digital Power Meter2 from your PC via Ethernet, USB or GPIB interface. On executing the program, the front panel image of the instruments (DL Series Oscilloscopes¹ or WT1600 Digital Power Meter) connected appears on the monitor of your PC. The control panel resembles the front panel of the actual hardware connected. You can now use a mouse to perform the same operations that you would, as if you were physically present infront of the instrument. This facilitates controlling instruments accross a networked environment (if using Ethernet)
1Excluding DL9000 series and SB series. Please use Xwirepuller for these instruments.

2WT1600 does not support USB interface.

The Model 2241-00 is a Precision Current Instrument Transformer for use with high accuracy Power Analyzers and Ammeters.

Yokogawa

Yokogawa has been developing measurement solutions for over 100 years, consistently finding new ways to give R&D teams the tools they need to gain the best insights from their measurement strategies. As well as offering a wide ranging product lineup and an extensive range of calibration and other services, the company has pioneered accurate power measurement throughout its history, and is the market leader in digital power analyzers.

Yokogawa instruments are renowned for maintaining high levels of precision and for continuing to deliver value for far longer than the typical shelf-life of such equipment. Yokogawa believes that precise and effective measurement lies at the heart of successful innovation – and has focused its own R&D on providing the tools that researchers and engineers need to address challenges great and small.

Yokogawa takes pride in its reputation for quality, both in the products it delivers – often adding new features in response to specific client requests – and the level of service and advice provided to clients, helping to devise measurement strategies for even the most challenging environments.

Contact Details

North America Headquarters - Texas

Yokogawa Corporation of America

12530 West Airport Blvd.

Sugar Land, TX 77478

Phone: (281) 340-2800

Sales: (800) 888-6400

Technical Support and Service: (800) 524-7378

Fax: (281) 340-3838

Find another Yokogawa Office

Contact form

Line Cards: