Yokogawa FG400 Isolated Arbitrary/Function Generator

Product Overview:

  • FG410: 1 channel. FG420: 2 channel
  • Output waveforms: Sine, Square, Pulse, Ramp, Parameter-variable waveform, noise, DC, and Arbitrary waveforms
  • Frequency range: Sine wave 0.01 µHz to 30 MHz
  • Amplitude resolution: 16 bits
  • Sampling rate: 120 MS/s
  • Output: 0 to 20 Volts, peak-to-peak
  • Synchronize up to 6 units to provide up to 12 output channels
  • GPIB and USB Interface
  • Generate waveforms acquired by Yokogawa's ScopeCorder and DL Series Oscilloscopes with XviewerLITE software
  • Warranty period for this instrument is 3-years

More

The FG400 easily generates basic, application specific and arbitrary waveforms with a sine wave frequency range of .01 µHz to 30 MHz.  Output waveforms consist of Sine, Square, Pulse, Ramp, Parameter-variable, Noise (Gaussian distribution), DC and Arbitrary.  This unit includes isolated outputs that allow the user to use it in the development of floating circuits, like motor drives, inverters, power supplies and other power electronic devices.  In addition, multiple units can be synchronized together to generate up to 12 phases of output.

Basic Waveforms:

 
Screen Shot 2014 04 04 At 1.15.00 PM 1

Advanced Functions:

Screen Shot 2014 04 04 At 1.16.54 PM

Input/Output Terminal:

Screen Shot 2014 04 04 At 1.19.24 PM 1

More Product Information

Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe' 'Iso-Probe'. For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY. For use with DL850 series, DL750/DL750P, SL1400, and SL1000. Not for use with CAT III or CAT IV measurements

  • Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m, 'Isolated Probe' 'Iso-Probe'.
  • For use with 701250, 701251, 701267, 701280, 701281, 720210 isolated-input modules ONLY.
  • Not for use with CAT III or CAT IV measurements

Passive Probe, 1000Vp CAT2, 100MHz, 10:1, 10MΩ, 1.5m, Isolated Probe, Safety Iso-Probe. For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY. For use with DL850 series, DL750/DL750P, SL1400, and SL1000. (This is the "new style" 700929 Iso-Probe for ScopeCorder.)

  • 8-bit, isolated, response speed: 1ms or less (DC), 20ms or less (AC), treshold level 6VDC or 50VAC.
  • To be used with measurement lead 758917 and 758922, 758929 or 701954 adapter leads.

  • Static digital input/output
  • 64 channels total (8 ports of 8 bits each), bidirectional
  • High current (300 mA), on each channel
  • Voltage inputs and outputs from 2 V to 60 V on each channel
  • Embedded soft front panel interface
  • Common IVI software drivers available
  • Multiple digital logic levels: LV TTL, TTL
  • Optical isolation at 1000 V

• 32 port-isolated output channels (bipolar solid state relays)

• ±60V AC/DC output

• High/low-side switch configuration

• 32 port-isolated input channels

• ±60V AC/DC input (three ranges)

• Interrupt support for each channel

IOS-440 I/O modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.

• 32, 64, or 96 outputs

• Solid state relays up to 1A DC, from up to 55V DC source

• Isolated (channel-to-channel) output

These boards provide an economical method for isolating and interfacing digital output signals from the VMEbus. The outputs are designed to control valves, switch counters, mechanical/optical relays, indicator lamps and more. Individual channels may be connected for either high-side switching or low-side switching.

• 32, 64, or 96 TTL/CMOS inputs

• 4 to 25V or 20 to 55V DC input

• Channel-to-channel isolation

These boards provide an economical method for isolating and interfacing DC voltage digital input signals to the VMEbus.