Products

Displaying 1 - 25 of 84

Advanced Illumination - AL-S025300 EuroBrite™ Bar Light

  • Cost-effective, feature-rich design
  • Robust, sealed IP67 enclosure
  • On-board smart driver - seamless strobe or continuous
  • Adaptive Overdrive - optimized power under all strobe conditions
  • Adaptive Power - factors in your light heat sink options and external temperature options to maximize performance and lifespan
  • Daisy-chain up to 4 units with pass-through control

Advanced Illumination - AL116 High Dispersion Wide Bar Lights

  • High Intensity light in a small package - only 32.2mm (1.26”) wide
  • Expandable in 50mm (2”) increments; lengths from 50mm (2”) to 508mm (20”)
  • Washdown option available
  • Diffuse lighting good for close working distance
  • Convenient M4 nut channel for mounting
  • Broad range of wavelengths available

Advanced Illumination - AL126 High Dispersion Narrow Bar Lights

  • High intensity light in a small package - Only 20.1 mm (.79”) wide
  • Best suited for close-up inspection (working distance of < 300mm (12””))
  • Expandable in 2” increments from 2” to 40”
  • Washdown version available
  • Very diffuse illumination
  • Broad range of wavelengths available

Advanced Illumination - AL143 2x3 General Purpose Spot Light

  • Available in a wide range of wavelengths
  • Illumination for medium working distances
  • Compact design, multiple lens options available
  • Convenient M4 nut channel mounting on back
  • Washdown version available

Advanced Illumination - AL150 BALA (Broad Area Linear Array) Bar Lights

  • Provides very even illumination along the length of the light, with controlled fall off in the transverse direction
  • Designed to provide low angle of incidence illumination over a long, wide area
  • Applications requiring very even illumination over a wider area can utilize two BALAs aligned parallel to and facing each other
  • AL150 - Expandable in 1” increments up to 80”
  • AL150 Derivatives: AL46120 (20”), AL4554 (9”), AL4424 (4”)

Advanced Illumination - AL295 MicroBrite™ Bar Lights

  • High performance compact bar light.
  • Outperforms larger bar lights on the market.
  • Expandable in 75mm (3”) increments up to 450mm (18”)
  • Broad range of wavelengths available

Advanced Illumination - Band Pass Filters

  • Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera.
  • Filtering can replace existing shrouds, simplifying the physical set up of an inspection site.
  • Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.

Advanced Illumination - BL-S050075 EuroBrite™ Small Backlight

  • Cost-effective, feature-rich design
  • Robust, sealed IP67 enclosure
  • On-board smart driver - seamless strobe or continuous
  • Adaptive Overdrive - optimized power under all strobe conditions
  • Adaptive Power - factors in your light heat sink options and external temperature options to maximize performance and lifespan

Advanced Illumination - BL-S100150 EuroBrite™ Strobe/Continuous Large Backlight

  • Cost-effective, feature-rich design
  • Robust, sealed IP67 enclosure
  • On-board smart driver - seamless strobe or continuous
  • Adaptive Overdrive - optimized power under all strobe conditions
  • Adaptive Power - factors in your light heat sink options and external temperature options to maximize performance and lifespan
  • Daisy-chain up to 4 units with pass-through control

Advanced Illumination - BL128 Expandable, Low Profile Surface Mount LED Back Light

  • Edge-to-edge back lighting in a .48" thick housing
  • 2" wide, expandable in 1" increments from 1" to 14"
  • Optional Sealed Version offers IP64 compliant design

Advanced Illumination - BL138 High Intensity Linear Backlights

  • 295,000 lux - perfect for line-scanning applications
  • Available 6” (152.4mm) increments from 6” (152.4mm) to 96” (2438.4mm) with the exception of a 3” (76.2mm)model
  • Intensity control of entire light via 0 - 10v input

Advanced Illumination - BL168 White High Intensity Linear Backlights

  • 70% brighter than the BL138
  • Perfect for line scanning applications: 507,000 lux
  • Expandable in 6” increments; available in lengths from 152mm (6”) up to 2438mm (96”)
  • Intensity control of entire light via 0-16v input

Advanced Illumination - BL193 Medium Intensity Linear Backlights

  • Extremely consistent light over the entire active area of illumination
  • 25mm (1”) wide illuminated strip in a 33.8mm (1.3”) wide housing
  • Available in 1” increments; Lengths from 1” to 80”

Advanced Illumination - BL245 Series UltraSeal Backlights

Built for extreme environments, our IP69K certified lights are specifically engineered to withstand everything from prolonged liquid immersion to high-pressure steam cleaning and corrosive washdown solutions.

Advanced illumination - BLXXYY BL 2D Expandable Series Back Lit LED Backlight

  • Extremely consistent light over the entire active area of illumination
  • Available in 1” x 1” increments; Sizes from 1” x 1” up to 22” x 34”

Advanced Illumination - BT Series MicroBrite™ Edge Lit Backlights

  • Ultra thin profile for easy installation in tight spaces
  • Highest flux density among all Ai backlights
  • Large working area with uniform illumination
  • Three sizes available

Advanced Illumination - BX 2D Expandable Series Edge Lit LED Backlight

  • Uniform illumination and low heat output
  • Available in 1” x 1” increments up to 24” x 24”

Advanced Illumination - CBXXYY CB 2D Expandable Series Back Lit Collimated Backlights

  • Collimation greatly improves edge detection of curved objects
  • Available in 1” increments; Sizes from 1” x 1” up to 16” x 16”

Advanced Illumination - CP112 Fiber Optic Couplers

  • Securely connects the SL112 or SL162 to Moritex, Dolan-Jenner, and Fostec fiber optic light guides
  • Set screws are included

Advanced Illumination - CXXXYY CX 2D Expandable, Edge Lit Collimated Backlights

  • 30% brighter than same size surface mount light
  • Uniform illumination and low heat output
  • Available in 1"x1" increments up to 12" x 12"

Advanced Illumination - DCS-100E Controller - Single Output Controller/3 Channels per Output

  • High power in a compact package; a slim design at 115mm x 122mm and only 22mm wide
  • Ethernet configuration options
  • Three independently controlled channels available
  • GUI, WebServer & Command Line Tools
  • Software SDKs including: LabView, C++, C# and more
  • For pulse widths greater than 100 µsec (10 µsec resolution)
  • Overdrive currents in strobe mode limited to 5-10x

Advanced Illumination - DCS-103E Controller Triple Output Controller / 1 Channel per Output

  • High power in a compact package; a slim design at 115 x 121mm and only 45mm wide
  • Three Independent Outputs
  • 1-Independent Channel within each output
  • Up to 90W output power, 30W per output
  • GUI, WebServer & Command Line Tools
  • Software SDKs including: LabView, C++, C# and more
  • For pulse widths greater than 100 µsec (10 µsec resolution)
  • Overdrive currents in strobe mode limited to 5-10x

Advanced Illumination - DCS-400E Quad Controller

  • Whether you're looking to create shapes from shading using computational imaging or building a multi-point inspection line, Advanced Illumination's Quad Controllers are engineered to solve a wide variety of applications.
  • The DCS-400E provides a total of 4 channels, each capable of firing independently. Built-in pre-programmed sequencing, allows users to progress through pre-determined recipes. This provides users the ability to automatically time a lighting sequence and output a correlated camera trigger, and to do so through multiple pre-programmed routines. As an example, by using the DCS’ frame-start signal, it is possible to synchronize a camera exposure to capture each channel as they flash in sequence.
  • Driven with Ai's proprietary SignaTech™, the DCS-800E and DCS-400E delivers peak performance while maintaining safe currents for ensured long-term stability.
  • Both Quad Controllers are housed in a compact enclosure with DIN rail mounting, delivering seamless integration into your existing machine vision system.

Advanced Illumination - DCS-800E Quad X2 Controller

  • Whether you're looking to create shapes from shading using computational imaging or building a multi-point inspection line, Advanced Illumination's Quad Controllers are engineered to solve a wide variety of applications.
  • The DCS-800E provides a total of 8 channels using 2 outputs, each channel capable of firing independently. Built-in pre-programmed sequencing, allows users to progress through pre-determined recipes. This provides users the ability to automatically time a lighting sequence and output a correlated camera trigger, and to do so through multiple pre-programmed routines. As an example, by using the DCS’ frame-start signal, it is possible to synchronize a camera exposure to capture each channel as they flash in sequence.
  • Driven with Ai's proprietary SignaTech™, the DCS-800E and DCS-400E delivers peak performance while maintaining safe currents for ensured long-term stability.
  • Both Quad Controllers are housed in a compact enclosure with DIN rail mounting, delivering seamless integration into your existing machine vision system.

Advanced Illumination - DCS-MP Manual Dimming Accessory

  • Detented, 30 position potentiometer for repeatable dimming
  • Built in DIN-rail or panel mounting feature
  • Flip up cover for potentiometer to prevent accidental adjustments
  • Spring clamp wiring terminal for vibration proof installation

Pages