Products

Displaying 1 - 12 of 12

Abaco NETernity™ PMC942RC Later 2 Unamanged GigE Switch & NIC in PMC RoHS

  • Eight 10/100/1000BaseTX auto-negotiating ports, supports full or half duplex
  • Four ports accessible from front RJ45 connectors, three ports routed to P4
  • One port GigE controller appears as a Network Interface to the host
  • Onboard NIC is connected to the eighth port on the switch
  • Serial console signals routed to P4
  • Full wire speed Layer 2 switching on all ports
  • Capability to fix port Ethernet speed and duplex settings
  • 4K MAC address table
  • Auto address learning
  • Auto address aging
  • RoHS Compliant
  • Wide operating temperature option -20°C to +70°C

Abaco NIC1 Network Interface Card - Quad 10/100/1000BaseT Switched Mezzanine Cards (XMC) with Front or Rear I/O and conduction cooled

  • Four 10BaseT/100BaseTX/1000BaseT ports
  • Rear I/O 
  • XMC form factor
  • Four Intel 82574IT Gigabit Ethernet controllers
  • Operating temperature -40C to +85C
  • PCI Express (Base Specification 1.1) compliant interface conforming to ANSI/VITA 42.3-2006
  • Supports jumbo frames up to 9KB
  • Auto-negotiate between 10Mbit/s, 100Mbit/s and 1Gbit/s
  • 64-bit address support
  • Full- or half-duplex operation
  • TCP/UDP/IPv4/IPv6 check sum offload, TCP segmentation offload
  • IEEE 802.1Q VLAN support
  • IPMI resource: FRU hardware definition stored in on-board EEPROM
  • IEEE 802.1q advanced packet filtering Support for hardware-based time stamping of IEEE 1588 and 802.1 as packets
  • Supports Microsoft Windows Linux and VxWorks
  • RoHS compliant

Abaco NIC10G Dual 10GbE XMC Card with Front or Rear I/O

  • Two 10GbE ports
  • Front or Rear I/O
  • XMC form factor
  • Intel 82599ES Dual 10GbE Controller
  • Air and Conduction cooled versions
  • Supports Jumbo Frames
  • 128 Transmit Queues
  • 64-bit address support
  • Dual SFP+ ports on front panel supporting 10GBase-SR, 10GBase-LR, 10GSFP+Cu
  • Bi-color LED for 10Gb/s Link status and Activity per port
  • Eight lanes PCI Express (Gen2) 
  • Support for Data Center Bridging (DCB)
    • (802.1Qaz, 802.1Qbb, 802.1p)
  • Rear I/O supports CX4 and KX4
  • 802.1q VLAN support
  • Support for Windows, Linux and VxWorks
  • RoHS compliant
  • Option for PXE Boot

Abaco NIC10GBT Dual 10GBase-T XMC card with Rear I/O

  • Two 10GBase-T ports
  • Rear I/O
  • XMC form factor
  • Conduction Cooled
  • Intel X540 Dual 10Gbe Controller
  • Supports Jumbo Frames up to 15.5 KB
  • Integrated IPsec and MAC sec Security Engines
  • Auto-negotiate between 100Mbits, 1Gbps and 10Gbps speeds
  • 128 Transmit and Receive Queues (per port)
  • 64-bit address support
  • TCP/UDP/IP checksum offload, TCP segmentation offload
  • IEEE 1588 Precision Time Protocol support
  • PCI Express v2.1 with 5.0 GT/s and 2.5 GT/s support for x1, x2, x4 and x8 link widths
  • Support Windows, Linux and VxWorks
  • RoHS compliant
  • 802.1Q VLAN support
  • Mezzio module with two RJ45 connectors
  • Supports Category 6 and 6A Cable via optional mezzio
  • Ethernet ports mapped to X12d or X8d per VITA 46.9
  • VITA 42.0 (XMC)
  • XMC Connector P15 VITA 42.3-8 Lane PCIe
  • XMC Connector P16 VITA 42.9 pattern mapping
  • Complies with ANSI/VITA 20-2001 (CC PMC), IEEE 1386 (CMC), IEEE 1386.1 (PMC)

Abaco NIC10GFT Network Interface Card - Dual port 10GbE XMC NIC with front I/O

  • Two 10 BASE-T ports
  • Front I/O 
  • XMC form factor
  • Intel X540 dual 10Gbe controller
  • x8 PCI Express (Base Specification 2.1) Compliant to ANSI/VITA 42.3
  • Supports jumbo frames up to 15.5 KB
  • Integrated IPsec and MACsec security engines
  • Auto-negotiates between 100Mbits, 1Gbps and 10Gbps speeds
  • 128 transmit and receive queues (per port)
  • 64-bit address support
  • Full dulex operating
  • 16 Mbit serial Flash memory
  • TCP/UDP/IP checksum offload, TCP segmentation offload
  • 802.1Q VLAN support
  • IPMI resource: FRU hardware definition stored in onboard EEPROM
  • IEEE 1588 precision time protocol support
  • Supports VxWorks, Windows and Linux
  • RoHS Compliant

Abaco PMC-GBIT-DT2BP Network Interface Card - PMC with Dual 1000BaseT/100BaseTX/10BaseT Rear Panel Gigabit Ethernet Interfaces

  • Dual 10BaseT/100BaseTX/1000BaseT network interface card with rear panel access
  • Single-wide 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC
  • Auto-negotiating protocol selection
  • Transmit and receive FIFOs
  • Drivers for VxWorks, Linux, Windows NT and Windows 2000 available
  • Supports Jumbo Frames
  • Rear panel access provided by the PIM-GBIT-DT module; module has two RJ-45 connectors and LED indicators for link, speed and activity

Abaco PMC-GBIT-DT2CC Conduction cooled PMC with Dual Gigabit Ethernet Interfaces

  • Dual 10BaseT/100BaseTX/1000BaseT network interface card with rear panel access
  • Single-wide 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-x PMC
  • Auto-negotiating protocol FIFOs
  • Drivers for VxWorks, Linux, Windows NT and Windows 2000 available
  • Supports Jumbo frames
  • Conduction cooling
  • Conformal coating
  • Extended operating temperature range: -40C to +85C when temperature screened
  • Rear panel access provided by the PIM-GBIT-DT module; module has two RJ45 connectors and LED indicators for link, speed and activity

Abaco PMC613FXRCSC Dual/Single 100BaseFX Ethernet Interface Card

  • PCI 66/33 MHz capable
  • Dual/single 100BaseFX ports
  • SC or ST connectors
  • Operating system support for Microsoft Windows 2000, Linux, VxWorks and Solarix
  • RoHS 2002/95/EC compliant
  • Option for Wide Operating Temperature 0°C to +70°C
  • IEEE P1386.1: PC Mezzanine Card, IEEE Standards compliant 

Abaco PMC676RCSC Gigabit Ethernet PMC NIC with Dual 1000BaseSX Interfaces

  • Packet filtering based on checksum errors
  • SNMP and RMON statistic counters
  • Hardware TCP checksum offloading
  • Support for various address filtering modes:
    • 16 exact matches (unicast or multicast)
    • 4096-bit hash filter for multicast frames
    • Promiscuous unicast and promiscuous multicast transfer modes
  • PCI-X 133 MHz, PCI 64-bit/66 MHz
  • Connector options SC, LC
  • DMA engine
  • Dual/single 1000 Mbit Ethernet
  • Jumbo Frame capable
  • 1000BaseSX or optional 1000BaseLX
  • RoHS compliant
  • Versions supporting wide operating temperature range available

Abaco PMC676RCTX Single or Dual Copper Gigabit Ethernet PMC with Deep FIFO

  • Packet filtering based on checksum errors
  • SNMP and RMON statistic counters
  • Hardware TCP checksum offloading
  • Support for various address filtering modes:
    • 16 exact matches (unicast or multicast)
    • 4096-bit hash filter for multicast frames
    • Promiscuous unicast and promiscuous multicast transfer modes
  • PCI-X 133 MHz, PCI 64-bit/66 MHz
  • RJ45 connectors
  • DMA engine
  • Dual 10/100/1000 BaseTX Ethernet
  • Jumbo Frame capable
  • RoHS compliant
  • Versions supporting wide operating temperature range available

Abaco PMC677RCLC Quad Fiber Gigabit Ethernet PMC - RoHS-compliant quad 1000BaseSX Gigabit Ethernet PCI -X NIC

  • PCI-X, PCI 64-BIT/66 MHz
  • DMA engine
  • Full 1000 Mbit point-to-point performance 
  • Jumbo frame capable
  • Four 1000 Mbit Ethernet fiber ports
  • LC connectors
  • 1000 BaseSX or 1000 BaseLX
  • RoHS 2002/95/EC
  • Conformal Coating
Host offloading Features:
 
  • Packet filtering based on checksum errors
  • SNMP and RMON statistic counters
  • Hardware TCP checksum offloading
  • Support for various address filtering modes:
    • 16 exact matches (unicast or multicast)
    • 4096-bit hash filter for multicast frames
    • Promiscuous unicast and promiscuous multicast transfer modes

Abaco PMC677RCTX PMC with Quad 10/100/1000BaseT Ethernet Interfaces

  • PCI-X 133 MHz, PCI 64-bit/66 MHz
  • DMA engine
  • Full 2000 Mbit point-to-point performance 
  • Jumbo frame capable
  • Four 10/100/1000BaseT copper ports
  • Supports auto-negotiation
  • RoHS 2002/95/EC compliant
  • Conformal coating available
  • Wide operating temperature option -20°C to +70°C