Products

Displaying 1 - 22 of 22

Aeroflex 5100 T/R Module Test Environment

  • Complete Synthetic Test Environment 
    Hardware, software, processes, support
  • Optimized for T/R Module 
    Test Test Module Subassemblies, Modules & Multi-module Assemblies on One System
  • Highest Test Throughput Available
  • Proven Systems Deployment 
    5th Generation Solution – Major Customers Worldwide
  • Full Range of Required Mixed Signal Capabilities 
    DC, Digital, Analog, RF/Microwave
  • System Level Architecture 
    Calibration, Verification, Alignment
  • Open System Architecture 
    System Hardware & Software, TPSs

Aeroflex 5200 Satellite Payload Test Environment

  • Complete Synthetic Test Environment
    Hardware, software, processes, support
  • Optimized for T/R Module Test
  • Highest Test Throughput Available
  • Proven Systems Deployment
    5th Generation Solution – Major Customers Worldwide
  • Full Range of Required Mixed Signal Capabilities
    DC, Digital, Analog, RF/Microwave
  • System Level Architecture
    Calibration, Verification, Alignment
  • Open System Architecture
    System Hardware & Software, TPSs

Aeroflex 7700 Integrated Microwave Test Solution

A Complete RF Test Environment
  • Delivered ready to test with a full-featured execution and development environment
  • Full set of common RF measurements
  • Fully integrated Device Under Test (DUT) control and power
  • Fully integrated control of peripherals such as temperature chambers
  • Architected to support ATE
Complex Device Testing Capable
  • Frequency range 1 MHz to 6 GHz (expandable to 26.5 GHz)
  • Complete measurement suite including S-parameters for full characterization of devices such as LNAs, VCOs, and transceiver modules
  • Control of device states built into measurements
A True Synthetic Architecture
  • Utilizes a common set of hardware for all stimulus and response functions
  • Smaller footprint than traditional “rack and stack” instruments
  • Mature system level calibration scheme
  • Reduced hardware cost compared to full instrument-based test system
  • New capability can be incrementally added at low cost with little impact to existing measurement sequences

Aeroflex CS9000SM Broadband Signal Analyzer and Recorder

  • 20-12000 MHz RF coverage
  • 40 MHz instantaneous bandwidth
  • Digital tuner (40 MHz-41 kHz selectable bandwidths)
  • -20 to -80 dBm max input power
  • 32 GB signal capture RAM
  • 1 TB removable data storage disk
  • 60 GB solid state system disk
  • GPS (location, time)
  • Advanced capture and analysis software
  • Record and analyze while stationary or mobile
  • RF low noise high gain amplication and preselect filtering
  • Weight: 40 lbs
  • Dimensions: 17” L × 14” H × 8.5” D
  • Battle Tested for EME Recordings

Aeroflex Explorer CS1247-18A Broadband Signal Analyzer and Recorder

The CS1247-18A Broadband Signal Analyzer and Recorder series provides the widest bandwidth and deepest memory RF/baseband signal analyzers available.  The BSA combines broadband RF downconverters, wide bandwidth high dynamic range ADCs and high speed memory with powerful DSP-based signal analysis software.  The wideband recording capability of the Explorer makes it simple to find, record, and analyze signals of interest. The DSP software analyzes both real time signal inputs and signals captured into BSA signal memory. Digital acquisition and processing achieve the highest fidelity, accuracy and repeatability. Signals recorded into memory can be saved to onboard storage or transferred over network.  Recorded signals can be imported into Aeroflex's Broadband Signal Generators and played back.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
The multi-threaded system application software allows signal acquisition with simultaneous analysis of signals, providing tight correlation of time, frequency and modulation measurements on the same signal space.

Aeroflex Explorer CS1247-18G Broadband Signal and Environment Series

The CS1247-18G Broadband Signal and Environment series provides the widest bandwidth and deepest memory RF/baseband signal generator available.  The BSG combines broadband RF upconverters, wide bandwidth high dynamic range DACs and high speed memory with powerful DSP-based signal creation software. Real signals, including recording using Cobham AvComm's Broadband Signal Analyzers or other recorder sources can be imported, combined with digitally generated signals, and then played back on the BSG for ultra-realistic test scenarios.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME

Aeroflex's Vector Signal Player (VSP) software provides simple controls for signal file selection, and output frequency and power control. Aeroflex's up converters use real (non-I/Q) conversion architectures, generating high dynamic range waveforms without the carrier leakage and signal image problems associated with I/Q modulators found in traditional signal sources.  The Vector Signal Simulator (VSS) software provides the unique ability to mix any combination of signals and impairments to generate complex signal environments.

Aeroflex Explorer CS1247-A Broadband Signal Analyzer and Recorder

The CS1247-A Broadband Signal Analyzer and Recorder series provides the widest bandwidth and deepest memory RF/baseband signal analyzers available.  The BSA combines broadband RF downconverters, wide bandwidth high dynamic range ADCs and high speed memory with powerful DSP-based signal analysis software.  The wideband recording capability of the Explorer makes it simple to find, record, and analyze signals of interest. The DSP software analyzes both real time signal inputs and signals captured into BSA signal memory. Digital acquisition and processing achieve the highest fidelity, accuracy and repeatability. Signals recorded into memory can be saved to onboard storage or transferred over network.  Recorded signals can be imported into Aeroflex's Broadband Signal Generators and played back.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
The multi-threaded system application software allows signal acquisition with simultaneous analysis of signals, providing tight correlation of time, frequency and modulation measurements on the same signal space.

Aeroflex Explorer CS1247-G Broadband Signal and Environment Series

The CS1247-G Broadband Signal and Environment series provides the widest bandwidth and deepest memory RF/baseband signal generator available.  The BSG combines broadband RF upconverters, wide bandwidth high dynamic range DACs and high speed memory with powerful DSP-based signal creation software. Real signals, including recording using Cobham AvComm's Broadband Signal Analyzers or other recorder sources can be imported, combined with digitally generated signals, and then played back on the BSG for ultra-realistic test scenarios.
Applications include:
  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
Aeroflex's Vector Signal Player (VSP) software provides simple controls for signal file selection, and output frequency and power control. Aeroflex's up converters use real (non-I/Q) conversion architectures, generating high dynamic range waveforms without the carrier leakage and signal image problems associated with I/Q modulators found in traditional signal sources.  The Vector Signal Simulator (VSS) software provides the unique ability to mix any combination of signals and impairments to generate complex signal environments.

Aeroflex Scout CS1104 Broadband Signal Analyzer (BSA) and Recorder

The CS1104 Portable Broadband Signal Analyzer and Recorder series provides the widest bandwidth and deepest memory RF/baseband signal analyzers available.  The BSA combines broadband RF downconverters, wide bandwidth high dynamic range ADCs and high speed memory with powerful DSP-based signal analysis software.  The wideband recording capability of the Explorer makes it simple to find, record, and analyze signals of interest. The DSP software analyzes both real time signal inputs and signals captured into BSA signal memory. Digital acquisition and processing achieve the highest fidelity, accuracy and repeatability. Signals recorded into memory can be saved to onboard storage or transferred over network.  Recorded signals can be imported into Aeroflex's Broadband Signal Generators and played back.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
The multi-threaded system application software allows signal acquisition with simultaneous analysis of signals, providing tight correlation of time, frequency and modulation measurements on the same signal space.

Yokogawa AQ2200-131/132 Grid TLS Module (C/L Band, 1-Channel / 2-Channel)

  • The AQ2200-131 and AQ2200-132 are single and dual channel tunable light source modules for mounting into the AQ2200 series multi application test system.
  • The output wavelength can be conveniently set to the predefined DWDM grid channels. 

Yokogawa AQ2200-215 Sensor Module (High Power up to +30 DBM, Long Wavelength)

  • The AQ2200-215 is an optical power meter designed specifically to measure high optical power up to +30dBm.
  • Features high speed sampling and advanced data processing functions. 
  • An ideal measurement tool for optical output power measurement and margin test of WDM transmission equipment, as well as gain measurements of optical fiber amplifiers.
  • It is commonly used in conjunction with other AQ2200 Series modules and the AQ6370C Optical Spectrum Analyzer to offer a flexible customized optical measurement system.

Yokogawa AQ2200-221 Sensor Module (Dual Channel, Long Wavelength)

  • The AQ2200-221 is a high-performance yet compact module equipped with two sensors.
  • Offers high-speed sampling, low polarization dependency, and rich data processing capabilities for improved measurement throughput and low-cost multi-port measurement.
  • With two high-performance sensors in one slot, this Optical Power Meter Sensor Module is ideal for space-saving, multi-port measurements. 

Yokogawa AQ2200-311A Optical Attenuator Module

The AQ2200-311A is a variable optical attenuation for the AQ2200 series. When it is installed in an AQ2200 series frame controller, it allows optical output to be attenuated to any value.
  • Wide attenuation range:
    • 0 to 60 dB (SM version)
    • 0 to 45 dB (MM version)
  • Wide wavelength range:
    • 1200 to 1700 nm(SM version)
    • 800 to 1370 nm (MM version)
  • Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
  • Low insertion loss: 1.0 dB (typical)
  • Low polarization dependence loss: 0.1 dBp-p or less
  • Monitor output (optional)
  • Configure the desired measurement system by combining AQ2200 Series modules with Yokogawa optical communications measuring instruments

Yokogawa AQ2200-331 Optical Attenuator Module (With a Built-In OPM)

  • Compact: The AQ2200-331 features an optical variable attenuator and an optical power meter for monitoring the optical output power in a one-slot module. Ideal for bit error testing
  • Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
  • Attenuation accuracy: within ±0.1 dB
  • With the output monitoring function, the AQ2200-331 allows direct setup of optical power at the output terminals
  • Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems

Yokogawa AQ2200-342 Dual Attenuator Module

  • Compact and space saving: The AQ2200-342 features two optical variable attenuator in a one-slot module
  • Wavelength range: 1260 to 1640 nm
  • Maximum attenuation range: 40 dB
  • Fast attenuation control: 100 ms
  • Shutter isolation: 70 dB or more

Yokogawa AQ2200-411 Optical Switch Module (1 x 4/1 x 8)

  • Compact: Optical switches of 1 x 4 or 1 x 8 port configuration in a one-slot size module
  • Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
  • Low insertion loss: 1.0 dB (typ.)
  • High switching reproducibility: within ±0.01 dB
  • Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems

Yokogawa AQ2200-412 Optical Switch Module (1 x 16)

  • Compact: Optical switches of 1 x 16 port configuration in a two-slot size module
  • Compatible with SMF(10/125µm) or MMF(50/125µm)
  • Low insertion loss: 1.0 dB (typ.)
  • High switching reproducibility: within ±0.01 dB
  • Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems

Yokogawa AQ2200-421 Optical Switch Module (1 x 2 / 2 x 2)

  • Compact: Optical switches of 1 x 2 or 2 x 2 port configuration in a one-slot size module
  • Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
  • Low insertion loss: 1.0 dB (typ.)
  • High switching reproducibility: within ±0.01 dB
  • Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems

Yokogawa AQ2200-642 Transceiver I/F Module

  • The AQ2200-642 reduces the complexity and cost of 10G optical transceiver testing by combining bus and power control features into the same mainframe that performs Signal Generation, BERT and Optical testing. This allows a single programming interface to control all aspects of the transceiver test, simplifying test setup, decreasing test time and increasing productivity.
  • The wiring complexity and test bench size are reduced by replacing separate Digital Multi-Meters, Programmable Power supplies and Serial I/F controllers with a single module.

Yokogawa AQ2200-651 SG Module

  • The AQ2200-651 Signal Generator module reduces the complexity and cost of 10G optical transceiver testing by combining Signal Generation functions into the same mainframe  that provides bus and power control while performing BERT and Optical testing. This allows a single programming interface to control all aspects of the transceiver  test, simplifying test setup, decreasing test time and increasing productivity. 
  • The wiring complexity and test bench size are reduced by replacing up to 5 Signal Generators with a single module.

Yokogawa AQ2211 Frame Controller (3 Slots)

The AQ2211 and AQ2212 frame controllers are platforms for the AQ2200 Multi Application Test System. These frame controllers contain a variety of measurement applications that enable you to get the information you need without connecting an external controller PC. In addition, they have three different external interfaces, so you can always use the best interface for a particular measurement application.

Yokogawa AQ2212 Frame Controller (9 Slots)

The AQ2211 and AQ2212 frame controllers are platforms for the AQ2200 Multi Application Test System. These frame controllers contain a variety of measurement applications that enable you to get the information you need without connecting an external controller PC. In addition, they have three different external interfaces, so you can always use the best interface for a particular measurement application.

  • Easy-to-view color display
  • USB port for data storage
  • Measurement module "hot-swapping" capability
  • Remote monitoring and measurement through a LAN