Products

Displaying 1 - 9 of 9

Acromag AcPC424 - Digital Input/Output Module Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels with six operating modes
The AcPC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers.
The 16 TTL input/output channels can be programmed as inputs or as outputs on an individual channel basis. The 24 differential input/output channels are programmed as inputs or outputs on an 4-channel port basis. All input channels can be enabled for change of state, low, or high level transition interrupts.
This module saves money and CompactPCI slots by combining differential I/O, TTL I/O, and counter/timer functions on one card.

Acromag AcPC464 - Digital Input/Output and Counter/Timer

  • 64 digital input/output channels
  • 16-bit counter/timer channels with six operating modes
  • Change of state and level interrupts
The AcPC464 module provides 64 digital input/ output channels and four 16-bit multifunction counter/timers.
All 64 I/O channels, when set as inputs, support configuration for interrupts on either a change-of-state or on a high-to-low or low-to-high transition. A debounce timer is selectable to help filter out false transitions.
Four 16-bit multifunction counters/timers are configurable for pulse width modulated output, watchdog timer, event counter, frequency measurement, pulse width measurement, period measurement, or one shot pulse output. The four 16-bit counters can also be configured into two 32-bit counter/timers.
This module saves money and CompactPCI slots by combining digital I/O and counter/timer functions on a single card.

Acromag IP405 Digital Output Module, High Voltage Outputs

  • 40 low-side switch output channels
  • 0-60V DC output range
  • High output current (up to 1A per channel)
The IP405 controls up to 40 low-side switches (open-drain MOSFETs).
Operation of this module is very simple. Writing a “0” bit to a channel data register opens the switch to turn off a field device. Similarly, writing a “1” bit closes the switch to turn on the device. Each register can be read back to verify the value. Loopback monitoring of critical control signals is easily accomplished by reading back output states using Acromag’s IP400 Digital Input Module.

Acromag IP408 Digital Input/Output Module, High Voltage I/O

  • 32 bi-directional digital input and/or output channels
  • 0-60V DC input and output range
  • Low-side output switches
  • Outputs sink up to 1A per channel
  • Change-of-state and level interrupts (up to 8 channels)

Acromag IP409 Digital Input/Output Module, Differential I/O

  • 24 differential digital input and/or output channels
  • Ruggedized RS-422A/485 transceivers
  • Interrupt support on all channels (change-of-state and high or low level transition
The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination. All channels can generate change-of-state (COS), low, or high level transition interrupts.

Acromag IP445 Digital Output Module, Isolated

  • 32 port-isolated output channels (bipolar solid state relays)
  • ±60V AC/DC output
  • High/low-side switch configuration
IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.
A major IP445A advantage is its flexibility. The module supports wide range bipolar (AC or DC) voltage switching. Each port can be configured for high or low-side switches. The outputs are TTL-compatible when configured as low-side switches using on-board socketed pull-up resistors.
Isolation protects your computer system from noise, transient signals, and field wiring faults. Outputs are grouped into four 8-channel ports. Ports are isolated via solid-state relays from the logic and from each other.

Acromag IP470A Digital Output Module, TTL Level

  • 48 bi-directional input/output channels
  • TTL-compatible inputs
  • CMOS-compatible open-drain outputs
  • Interrupt support for each channel

IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.

Acromag PMC408 Digital Input/Output Module, High Voltage I/O

  • 32 bi-directional digital inputs and/or outputs
  • 0-60V DC input and output range
  • Low-side output switches
  • Outputs sink up to 1A per channel
  • Change-of-state and level interrupts (up to 8 channels)

Acromag PMC424 Digital Input/Output Module, Differential, TTL, Counter/Timer

  • 24 differential I/O, 16 TTL I/O
  • Four 16-bit counter/timer channels, six operating modes
  • Change of state and level interrupts
The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.