Products

Displaying 1 - 15 of 15

Aeroflex 5100 T/R Module Test Environment

  • Complete Synthetic Test Environment 
    Hardware, software, processes, support
  • Optimized for T/R Module 
    Test Test Module Subassemblies, Modules & Multi-module Assemblies on One System
  • Highest Test Throughput Available
  • Proven Systems Deployment 
    5th Generation Solution – Major Customers Worldwide
  • Full Range of Required Mixed Signal Capabilities 
    DC, Digital, Analog, RF/Microwave
  • System Level Architecture 
    Calibration, Verification, Alignment
  • Open System Architecture 
    System Hardware & Software, TPSs

Aeroflex 5200 Satellite Payload Test Environment

  • Complete Synthetic Test Environment
    Hardware, software, processes, support
  • Optimized for T/R Module Test
  • Highest Test Throughput Available
  • Proven Systems Deployment
    5th Generation Solution – Major Customers Worldwide
  • Full Range of Required Mixed Signal Capabilities
    DC, Digital, Analog, RF/Microwave
  • System Level Architecture
    Calibration, Verification, Alignment
  • Open System Architecture
    System Hardware & Software, TPSs

Aeroflex 6146 Pulse Modulator

A range of pulse modulators providing frequency coverage from 70 MHz to 40 GHz for use in radar receiver testing. Two models are available for the 6800A Series that additionally offer internal multi-pulse waveform generation.
  • Wide frequency coverage, 70 MHz to 40 GHz
  • Fast rise and fall times
  • Standard TTL switching levels
  • Small and rugged for field use

Aeroflex 6910/6920/6930 Power Sensors

A range of 17 Power Sensors available for use with 6200B MTS, 6960B, CPM and 6970 Power Meters.
  • Wide frequency coverage 30 kHz to 46 GHz
  • Power levels from -70 dBm (100 pW) to +44 dBm (25 W)
  • 50 ohm (and 75 ohm) sensors
  • High overload capability
  • Low VSWR reduces measurement uncertainty
  • Linearity correction data supplied
  • Field replaceable RF assembly

Aeroflex 7700 Integrated Microwave Test Solution

A Complete RF Test Environment
  • Delivered ready to test with a full-featured execution and development environment
  • Full set of common RF measurements
  • Fully integrated Device Under Test (DUT) control and power
  • Fully integrated control of peripherals such as temperature chambers
  • Architected to support ATE
Complex Device Testing Capable
  • Frequency range 1 MHz to 6 GHz (expandable to 26.5 GHz)
  • Complete measurement suite including S-parameters for full characterization of devices such as LNAs, VCOs, and transceiver modules
  • Control of device states built into measurements
A True Synthetic Architecture
  • Utilizes a common set of hardware for all stimulus and response functions
  • Smaller footprint than traditional “rack and stack” instruments
  • Mature system level calibration scheme
  • Reduced hardware cost compared to full instrument-based test system
  • New capability can be incrementally added at low cost with little impact to existing measurement sequences

Aeroflex AWARES CS95018 Advanced System

  • Independent RF up and down converters,10 MHz to 18 GHz,
  • Instantaneous signal bandwidths 400 MHz and 70 MHz
  • 32 Gigabytes of solid state signal memory
  • Trigger supported Stimulus-Response hardware and software application.
  • Precision low phase noise LOs and time bases
  • Powerful and flexible RF environment signal generation and analysis software
  • RAID high speed disk file storage and retrieval with 8 Terabytes of storage space
  • Local, network, and remote control applications

Aeroflex CS9000SM Broadband Signal Analyzer and Recorder

  • 20-12000 MHz RF coverage
  • 40 MHz instantaneous bandwidth
  • Digital tuner (40 MHz-41 kHz selectable bandwidths)
  • -20 to -80 dBm max input power
  • 32 GB signal capture RAM
  • 1 TB removable data storage disk
  • 60 GB solid state system disk
  • GPS (location, time)
  • Advanced capture and analysis software
  • Record and analyze while stationary or mobile
  • RF low noise high gain amplication and preselect filtering
  • Weight: 40 lbs
  • Dimensions: 17” L × 14” H × 8.5” D
  • Battle Tested for EME Recordings

Aeroflex Explorer CS1247 Broadband Signal Analyzer

Other analyzers tell you what happened. The BSA shows you why.

The Explorer CS1247 Broadband Signal Analyzer (BSA) instrument is designed to find and to solve the toughest RF issues. It combines live and off-line signal analysis capabilities to address multiple test applications,  including:
 
• Communications
• Radar
• Satellite
• Electronic Warfare (EW)
• Electromagnetic Environment (EME)
• Drive (mobile collections)
 
 

Aeroflex Explorer CS1247-18A Broadband Signal Analyzer and Recorder

The CS1247-18A Broadband Signal Analyzer and Recorder series provides the widest bandwidth and deepest memory RF/baseband signal analyzers available.  The BSA combines broadband RF downconverters, wide bandwidth high dynamic range ADCs and high speed memory with powerful DSP-based signal analysis software.  The wideband recording capability of the Explorer makes it simple to find, record, and analyze signals of interest. The DSP software analyzes both real time signal inputs and signals captured into BSA signal memory. Digital acquisition and processing achieve the highest fidelity, accuracy and repeatability. Signals recorded into memory can be saved to onboard storage or transferred over network.  Recorded signals can be imported into Aeroflex's Broadband Signal Generators and played back.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
The multi-threaded system application software allows signal acquisition with simultaneous analysis of signals, providing tight correlation of time, frequency and modulation measurements on the same signal space.

Aeroflex Explorer CS1247-18AG Broadband Signal Analyzer and Generator

The Explorer CS1247 Broadband Signal Analyzer (BSA) instrument is designed to find and to solve the toughest RF issues. It combines live and off-line signal analysis capabilities to address multiple test applications, including:
  • Communications
  • Radar
  • Satellite
  • OTA Testing
  • Electromagnetic Environment (EME)
  • Drive (mobile collections)
The Aeroflex BSA is used to record, process and analyze RF signals.

Aeroflex Explorer CS1247-18G Broadband Signal and Environment Series

The CS1247-18G Broadband Signal and Environment series provides the widest bandwidth and deepest memory RF/baseband signal generator available.  The BSG combines broadband RF upconverters, wide bandwidth high dynamic range DACs and high speed memory with powerful DSP-based signal creation software. Real signals, including recording using Cobham AvComm's Broadband Signal Analyzers or other recorder sources can be imported, combined with digitally generated signals, and then played back on the BSG for ultra-realistic test scenarios.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME

Aeroflex's Vector Signal Player (VSP) software provides simple controls for signal file selection, and output frequency and power control. Aeroflex's up converters use real (non-I/Q) conversion architectures, generating high dynamic range waveforms without the carrier leakage and signal image problems associated with I/Q modulators found in traditional signal sources.  The Vector Signal Simulator (VSS) software provides the unique ability to mix any combination of signals and impairments to generate complex signal environments.

Aeroflex Explorer CS1247-A Broadband Signal Analyzer and Recorder

The CS1247-A Broadband Signal Analyzer and Recorder series provides the widest bandwidth and deepest memory RF/baseband signal analyzers available.  The BSA combines broadband RF downconverters, wide bandwidth high dynamic range ADCs and high speed memory with powerful DSP-based signal analysis software.  The wideband recording capability of the Explorer makes it simple to find, record, and analyze signals of interest. The DSP software analyzes both real time signal inputs and signals captured into BSA signal memory. Digital acquisition and processing achieve the highest fidelity, accuracy and repeatability. Signals recorded into memory can be saved to onboard storage or transferred over network.  Recorded signals can be imported into Aeroflex's Broadband Signal Generators and played back.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
The multi-threaded system application software allows signal acquisition with simultaneous analysis of signals, providing tight correlation of time, frequency and modulation measurements on the same signal space.

Aeroflex Explorer CS1247-AG Broadband Signal Analyzer and Generator

The Explorer CS1247 Broadband Signal Analyzer (BSA) instrument is designed to find and to solve the toughest RF issues. It combines live and off-line signal analysis capabilities to address multiple test applications, including:
  • Communications
  • Radar
  • Satellite
  • OTA Testing
  • Electromagnetic Environment (EME)
  • Drive (mobile collections)
The Aeroflex BSA is used to record, process and analyze RF signals.

Aeroflex Explorer CS1247-G Broadband Signal and Environment Series

The CS1247-G Broadband Signal and Environment series provides the widest bandwidth and deepest memory RF/baseband signal generator available.  The BSG combines broadband RF upconverters, wide bandwidth high dynamic range DACs and high speed memory with powerful DSP-based signal creation software. Real signals, including recording using Cobham AvComm's Broadband Signal Analyzers or other recorder sources can be imported, combined with digitally generated signals, and then played back on the BSG for ultra-realistic test scenarios.
Applications include:
  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
Aeroflex's Vector Signal Player (VSP) software provides simple controls for signal file selection, and output frequency and power control. Aeroflex's up converters use real (non-I/Q) conversion architectures, generating high dynamic range waveforms without the carrier leakage and signal image problems associated with I/Q modulators found in traditional signal sources.  The Vector Signal Simulator (VSS) software provides the unique ability to mix any combination of signals and impairments to generate complex signal environments.

Aeroflex Scout CS1104 Broadband Signal Analyzer (BSA) and Recorder

The CS1104 Portable Broadband Signal Analyzer and Recorder series provides the widest bandwidth and deepest memory RF/baseband signal analyzers available.  The BSA combines broadband RF downconverters, wide bandwidth high dynamic range ADCs and high speed memory with powerful DSP-based signal analysis software.  The wideband recording capability of the Explorer makes it simple to find, record, and analyze signals of interest. The DSP software analyzes both real time signal inputs and signals captured into BSA signal memory. Digital acquisition and processing achieve the highest fidelity, accuracy and repeatability. Signals recorded into memory can be saved to onboard storage or transferred over network.  Recorded signals can be imported into Aeroflex's Broadband Signal Generators and played back.

Applications include:

  • Radar
  • Communications
  • EW/ECM
  • Spectrum monitoring
  • EME
The multi-threaded system application software allows signal acquisition with simultaneous analysis of signals, providing tight correlation of time, frequency and modulation measurements on the same signal space.