Aligned Vision

Aligned Vision, located in Chelmsford, MA, is the world leader in industrial laser projection. Our laser projectors are used by aerospace, wind turbine, F1 racing, and automotive companies to manufacture composite parts. Laser projectors produce accurate templates of light from design data. This function streamlines manufacturing by eliminating process steps that consume time and are prone to error. The projectors also save time and money by expediting inspection.

Contact Details

Aligned Vision

27 Industrial Avenue 

Chelmsford, MA 01824

Phone: 978-244-1166

Fax: 978-244-9288

Contact form or Email: sales@aligned-vision.com

Line Cards: 

Products

Aligned Vision - Android Remote System

Aligned Vision - Android Remote System

Wireless System Includes:
  • Wireless access Point (receiver)
  • Android remote and/or tablet (transmitter)
Android remote controls are full-featured remotes that provide full system control from the tool. Beam steering, registration, ply selection, idle and redisplay are all easily controlled with the remote. It also accesses work instructions, ply-book images, the list of plies, pictures of ply outlines, and billboard messages. Operators stay at the tool and work more efficiently. Additional remotes may be easily added to the system at any time. Up to 8 remotes or tablets can be used with one controller.

Aligned Vision - Billboards

Aligned Vision - Billboards

  • Communications and information are available at the tool location
  • Negates the need for the operator to walk to the computer
  • Text always right side up compared to text projected directly onto a part
Billboards provide immediate visual information to the operator on the production floor. The current status of the system is shown. This allows the operator to stay at the tool and not return to the control station for feedback. The information displayed on the billboards includes system messages and ply information from the part file as defined by the creator of the part file.

Aligned Vision - BuildGuide

Aligned Vision - BuildGuide

  • BUILDGUIDE Centralizes Process Control
  • Eliminates Paper Instruction
  • Improves Build Consistency
Aligned Vision - Fabrication Management

Aligned Vision - Fabrication Management

  • The system automatically imports a design file and generates a laser projection program.
  • An Engineer uses drop-down menus to insert non-layup commands into a single, electronic set of work instructions.
  • Operators advance work instructions via remote control at the tool.
  • The system ensures that debulks and other non-layup tasks occur as scheduled and as specified.
  • Inspections are automatically completed with one touch of the remote.
  • The system automatically populates build reports and generates comprehensive documentation – an as-built digital twin – for full traceability.

Aligned Vision - KitGuide System

Aligned Vision - KitGuide System

  • Saves time dramatically for nest-sorting
  • Works with any nesting software
  • Minimizes human errors in sorting and kitting
  • Optional: wireless printer to simultaneously label the piles
  • Optional: KitGuide with ProjectorVision to verify that the ply being picked-up is the correct ply
  • Triples unloading rate
  • Splits table for unloading, eliminating the need to reach across

Aligned Vision - LASERGUIDE Projectors and Software

Aligned Vision - LASERGUIDE Projectors and Software

The LASERGUIDE system is foremost in the industry in terms of range, accuracy, ease of use, and flexibility. Using LASERGUIDE, our Fabrication Management system requires fewer projectors, controllers, and operator setup activities than any other laser system. LASERGUIDE combines the most advanced, durable hardware with unparalleled software capabilities.

Aligned Vision - LASERVISION projection system

Aligned Vision - LASERVISION projection system

LASERVISION extends Aligned Vision’s industry-leading automated laser technology to the full build cycle. The system projects design data to the tool or work surface with the same technology as our proven LASERGUIDE system; and then it automatically captures and analyzes build data, archiving both data and imagery. Complete fabrication management is accomplished by one system.
Aligned Vision achieves this capability by integrating an imaging system with our reliable laser guidance technology. LASERVISION’s imaging component, like its projection component, draws information directly from design data. With LASERVISION’s inspection capabilities, the system can:
  • Auto-aim its imaging system accurately and efficiently
  • Project design data such as edge locations and fiber orientations onto the inspection zone
  • Capture images and conduct automated analysis
  • Direct the operator to any suspect areas
  • Create documentation, including images, of each inspection site
LASERVISION replaces cumbersome, time-consuming manual inspection, reducing inspection time from minutes (or hours) to seconds.
LASERVISION also replaces the human inspector with computer-driven analysis and accuracy.

Aligned Vision - Repairable Targets

Aligned Vision - Repairable Targets

LASERGUIDE and LASERVISION use 4 to 24 retroreflective targets on the tool per projector to establish the location of the tool relative to each laser projector. Typical targets are 0.50” diameter with a 0.1” or 0.2” diameter in retro-reflective spot centered at the top face.
Additional targets are available in standard metric units or custom dimensions, as required by the tool.
Targets are field-repairable with the Aligned Vision Target Repair Kit. Target repair is much more costeffective than purchasing replacement targets, providing additional long-term savings.

Aligned Vision - Wireless Printers

Aligned Vision - Wireless Printers

These portable, belt-mounted printers provide flexibility to the operator by allowing him to use both hands for other tasks. The printers can accommodate to different label sizes and can be used wireless or with a cable. They allow the operator to control the pace while kitting using KitGuide.


Fluke CLKT Infrared Windows are Available in Three Sizes 50 mm (2 in), 75 mm (3 in) and 100 mm (4 in)

Each CLKT infrared window is engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles.

The ClirVu® coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold outdoor environments.

Each Fluke infrared window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs.

CLKT infrared windows come complete with a security access key, installation instructions and self-adhesive drilling template.

For 5 minute or less installation and Autoground consider the CV300.


Installs and grounds in less than 5 minutes   Save time with quick and easy installation with the CV Series – 5 minutes or less.
  • One technician
  • One hole with standard Greenlee® punch
  • Panel door does not need to be removed
  • Grounds instantly to metal enclosure with patent-pending AutoGround™ process
  • Maintains panel arc test ratings up to 63kA when properly installed
Work more efficiently with Fluke ClirVu® CV200 50 mm (2 in) Infrared Windows
  • NFPA 70E processes significantly reduced due to less work permit requirements
  • Faster and more comfortable inspections because full PPE is often not required
  • Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance
  • CV200 is Torture Tested™ to the highest arc blast test ratings IEEE C37.20.7: 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
  • Convenience of both quick turn or security keyed access


  • MATLAB® and LabVIEW® software compatibility allows users to integrate infrared data, images and videos to support R&D analysis
  • 640 x 480 resolution
  • See the details you need with optional smart lenses: 2x and 4x telephoto, wide angle and macro lenses
  • Optimize images, generate customizable reports and export images to the format of your choice with SmartView® desktop software
  • Wirelessly connect your camera to the Fluke Connect® system to easily share and edit images


  • Four electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 200 MHz bandwidth model
  • 2.5 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Quad meter measurements via scope BNC inputs
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 7 hours (BP291 included standard)
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


  • Continuous touchscreen IR-Fusion™
  • 5 hours battery life
  • Can withstand drop up to 2 meter
  • Water and dust resistant—IP54 enclosure rating
  • Automatically organize and file thermal images with Fluke Connect™ Asset Tagging
  • 120 x 90 infrared resolution