AR Modular RF

On the battlefield, in the air, on the ground. In the most extreme and torturous environments. Our products are constantly punished. And they consistently perform beyond expectations. AR Modular RF military products are battle-tested, airborne-certified, and gunship-approved. They're simple to operate, smaller and more portable for troops on the go. They're completely dependable.

That applies to all our broadband, sub-band, and discreet frequency non-EMC RF amplifiers and modules. The products we create for medical, scientific, manufacturing, and government applications result from the same innovative thinking and strict standards that drive our military products.

There are no RF amplifier systems or modules that work harder, do more or last longer.

Contact Details

AR Modular RF

21222 30th Dr. SE

Building C, Suite 200

Phone: (425) 485-9000

Fax: (425) 486-9657

Sales Email: modularrfsales@arworld.us

Customer Service: ARMService@ARWorld.us

Products
Amplifier Modules Rack Mount Amplifiers
Tactical Booster Amplifiers

Line Cards: 

Products

AR Modular - AR-125R - 125 Watts PEP, 30 - 512 MHz, Tx/Rx 19" Rack Mount Booster Amplifier

AR Modular - AR-125R - 125 Watts PEP, 30 - 512 MHz, Tx/Rx 19" Rack Mount Booster Amplifier

  • Radio Vendor independent design, single and multi-band radio compatible with just an RF and power connections
  • Operates independently or under remote control (GUI – over Ethernet)
  • Built to meet MIL-STD-461
  • Optional remote SATCOM Low Noise Amplifier system operated over the RF coaxial cable via a remote bias tee
  • Compatible with 5 to 20 Watt tactical radios

AR Modular - AR-20 - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier with LNA

AR Modular - AR-20 - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier with LNA

The Model AR-20 is a portable, lightweight, fully automatic band-switching RF booster amplifier for use with multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and networking waveforms. The AR-20 produces 20 Watts from a 1 to 2 Watt PEP radio input and covers the frequency band of 30-512 MHz. The unit has a wide range input DC voltage allowing operation from a single battery (XX90 battery) or 12 and 28 VDC vehicle power sources.
It also includes Over Temperature Protection, RF sensing, T/R Switching, Automatic Level Control (ALC), Harmonic Filters, Co-Site filters and protection against antenna mismatch. The AR-20 also has a built-in internal LNA that can be switched on or off by the front panel switch to improve SATCOM receive performance. The amplifier is comprised of a rugged 4-piece aluminum case. Optional interface coaxial cables, DC battery cables, and kits for man-packing the amplifier are available.

AR Modular - AR-20B - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier

AR Modular - AR-20B - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier

The Model AR-20B is a portable, lightweight, fully automatic band-switching RF booster amplifier for use with multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and networking waveforms. The AR-20B produces 20 Watts from a 1 to 2 Watt PEP radio input and covers the frequency band of 30-512 MHz. The unit has a wide range input DC voltage allowing operation from a single battery (XX90 battery) or 12 and 28 VDC vehicle power sources.
It also includes Over Temperature Protection, RF sensing, T/R Switching, Automatic Level Control (ALC), Harmonic Filters, Co-Site filters and protection against antenna mismatch. The amplifier is comprised of a rugged 4-piece aluminum case. The AR-20B is the simpler version of the 20W family without an LNA and power select (contact AR Modular RF for the unit with the LNA feature). Optional interface coaxial cables, DC battery cables, and kits for man-packing the amplifier are available.

AR Modular - AR-20BKT - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier Kit. Kit includes amp, cables, pouches & LOS antenna

The Model AR-20B is a portable, lightweight, fully automatic band-switching RF booster amplifier for use with multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and networking waveforms. The AR-20B produces 20 Watts from a 1 to 2 Watt PEP radio input and covers the frequency band of 30-512 MHz. The unit has a wide range input DC voltage allowing operation from a single battery (XX90 battery) or 12 and 28 VDC vehicle power sources.
It also includes Over Temperature Protection, RF sensing, T/R Switching, Automatic Level Control (ALC), Harmonic Filters, Co-Site filters and protection against antenna mismatch. The amplifier is comprised of a rugged 4-piece aluminum case. The AR-20B is the simpler version of the 20W family without an LNA and power select (contact AR Modular RF for the unit with the LNA feature). Optional interface coaxial cables, DC battery cables, and kits for man-packing the amplifier are available.

AR Modular - AR-20BKT-DUAL - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier Kit. Kit includes amp, cables, pouches, switch, LOS & SATCOM antennas

The Model AR-20B is a portable, lightweight, fully automatic band-switching RF booster amplifier for use with multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and networking waveforms. The AR-20B produces 20 Watts from a 1 to 2 Watt PEP radio input and covers the frequency band of 30-512 MHz. The unit has a wide range input DC voltage allowing operation from a single battery (XX90 battery) or 12 and 28 VDC vehicle power sources.
It also includes Over Temperature Protection, RF sensing, T/R Switching, Automatic Level Control (ALC), Harmonic Filters, Co-Site filters and protection against antenna mismatch. The amplifier is comprised of a rugged 4-piece aluminum case. The AR-20B is the simpler version of the 20W family without an LNA and power select (contact AR Modular RF for the unit with the LNA feature). Optional interface coaxial cables, DC battery cables, and kits for man-packing the amplifier are available.

AR Modular - AR-20EP - 20 Watts CW/PEP, 225 - 450 MHz, Tx/Rx Booster Amplifier

AR Modular - AR-20EP - 20 Watts CW/PEP, 225 - 450 MHz, Tx/Rx Booster Amplifier

The Model AR-20EP is a portable, lightweight, fully automatic band-switching RF booster amplifier for the EPLRS Tactical Radio employing legacy, proprietary, and emerging waveforms. The AR-20EP produces 20 Watts from 2 Watts typical CW/PEP radio input and covers the frequency range of 225-450 MHz. The unit has a wide input DC voltage range and can operate from 12 to 35.5 VDC. It also includes Voltage Spike Suppression, Over Temperature Protection, RF sensing, T/R Switching, Harmonic Filters, and protection against antenna mismatch. The AR-20EP has a 4dB NF and a 12dB gain switchable LNA in the receive loop. The amplifier is comprised of rugged 4-piece aluminum case.

AR Modular - AR-20H - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier with Remote Keyline

AR Modular - AR-20H - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier with Remote Keyline

The Model AR-20H is a portable, lightweight, fully automatic band-switching RF booster amplifier for multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and emerging waveforms. The AR-20H produces 20 Watts from a nominal 2 Watts CW/PEP radio input and covers the frequency band of 30-512 MHz. The unit has a DC voltage range of 18 to 36 VDC vehicle power. The unit is designed for use with the latest modern networking formats including ANW2C and SRW. The AR-20H also includes voltage spike suppression, over temperature protection, RF sensing T/R switching, harmonic filters, lightning protection, and protection against antenna mismatch. The AR-20H has a typical 4dB Noise figure and approximately 6dB gain Low Noise Amplifier in the receive path. The AR-20H was tested to meet specific portions of MIL-STD-461F, MIL-STD-464C, MIL-STD-704F MIL-STD-810G and RTCA/DO-160G. The amplifier is comprised of rugged 4-piece aluminum case.

AR Modular - AR-20HC2 - 20 Watts PEP, 300 - 512 MHz, Tx/Rx Booster Amplifier

AR Modular - AR-20HC2 - 20 Watts PEP, 300 - 512 MHz, Tx/Rx Booster Amplifier

The Model AR-20HC2 is a portable, lightweight, RF booster. The AR-20HC2 produces 20 Watts from a nominal 2 Watts CW/PEP radio input and covers the frequency band of 300-500 MHz. The unit is designed for use with the FSK and other latest modern networking formats like ANW2C and SRW. It also includes Voltage Spike Suppression, Over Temperature Protection, RF sensing T/R Switching, Harmonic Filters, Co-Site Filtering, lightning protection, and protection against antenna mismatch

AR Modular - AR-20KT - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier Kit with LNA. Kit includes amp, cables, pouches & LOS antenna

AR Modular - AR-20KT - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier Kit with LNA. Kit includes amp, cables, pouches & LOS antenna

The Model AR-20 is a portable, lightweight, fully automatic band-switching RF booster amplifier for use with multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and networking waveforms. The AR-20 produces 20 Watts from a 1 to 2 Watt PEP radio input and covers the frequency band of 30-512 MHz. The unit has a wide range input DC voltage allowing operation from a single battery (XX90 battery) or 12 and 28 VDC vehicle power sources.
It also includes Over Temperature Protection, RF sensing, T/R Switching, Automatic Level Control (ALC), Harmonic Filters, Co-Site filters and protection against antenna mismatch. The AR-20 also has a built-in internal LNA that can be switched on or off by the front panel switch to improve SATCOM receive performance. The amplifier is comprised of a rugged 4-piece aluminum case. Optional interface coaxial cables, DC battery cables, and kits for man-packing the amplifier are available.

AR Modular - AR-20KT-DUAL - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier Kit with LNA. Kit includes amp, cables, pouches, switch, LOS & SATCOM antennas

AR Modular - AR-20KT-DUAL - 20 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier Kit with LNA. Kit includes amp, cables, pouches, switch, LOS & SATCOM antennas

The Model AR-20 is a portable, lightweight, fully automatic band-switching RF booster amplifier for use with multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and networking waveforms. The AR-20 produces 20 Watts from a 1 to 2 Watt PEP radio input and covers the frequency band of 30-512 MHz. The unit has a wide range input DC voltage allowing operation from a single battery (XX90 battery) or 12 and 28 VDC vehicle power sources.
It also includes Over Temperature Protection, RF sensing, T/R Switching, Automatic Level Control (ALC), Harmonic Filters, Co-Site filters and protection against antenna mismatch. The AR-20 also has a built-in internal LNA that can be switched on or off by the front panel switch to improve SATCOM receive performance. The amplifier is comprised of a rugged 4-piece aluminum case. Optional interface coaxial cables, DC battery cables, and kits for man-packing the amplifier are available.

AR Modular - AR-35 - 35 WATTS CW, 35 WATTS PEP, 30 MHz - 512 MHz, Multi-Band, Automatic Band-Switching, GSA Schedule Contract GS-07F-472AA

AR Modular - AR-35 - 35 WATTS CW, 35 WATTS PEP, 30 MHz - 512 MHz, Multi-Band, Automatic Band-Switching, GSA Schedule Contract GS-07F-472AA

  • Radio Vendor independent design. Single and multi- band radio compatible with just an RF connection
  • 35W CW across the entire 30–512 MHz band
  • Low RF input power for full 35W CW output
  • Super low “sleep mode” standby Rx power drain
  • High speed filter switching in SINCGARS and HAVEQUICK modes to assure interference free operation
  • DAMA/IW capable
  • Battery and Vehicle power compatible, 12 and 24 volt systems. Filtered and DC transient protected
  • Waterproof (Submersible)
  • 3 year Warranty from a company with 40+ years in the business

AR Modular - AR-50 - 50 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifer

AR Modular - AR-50 - 50 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifer

  • Radio vendor independent design
  • Supports single & multi-band radios with just an RF connection
  • Full band automatic high-speed filter switching for SINCGARS & HAVEQUICK modes to assure interference free operation
  • Dedicated LOS and SATCOM antenna ports
  • Multi-level RF output power switch
  • LOS/SATCOM LNA ON/OFF selection
  • Internal LNA with co-site filtering
  • ASCM Compatible
  • JITC/DAMA Certified with AN/PSC-5D & AN/PRC-117G
  • JITC/IW Certified with AN/PRC-117G
  • Designed to meet applicable sections of MIL-STD-810F/designed for ground/base vehicle use

Pages


  • Power quality statistics according to EN50160
  • Voltage event list (dips, swells and interruptions)
  • Continuous recording of:
    • Voltage
    • Current
    • Power P, Q, S
    • Power factor
    • kWh
    • Flicker
    • Unbalance
    • Frequency
    • Voltage and current harmonics to the 50th / Interharmonics
    • THD
    • Mains signaling
  • Triggered recordings
  • Online mode (Oscilloscope, transients and events)
  • 2 GB Flash memory


  • Safety first. Connect the insulation tester then keep yourself out of harm's way by monitoring your test measurements remotely.
  • Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
  • Quickly find problems by saving and comparing measurements over time on a wireless device.


  • Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
  • GPS time synchronization: Correlate data with events or datasets from other instruments with precision
  • Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
  • Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
  • 10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
  • 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
  • Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
  • Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
  • Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions


  • Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
  • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
  • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
  • LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
  • Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
  • Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
  • Save multiple logging sessions before PC download is necessary.
  • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
  • On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
  • Real time clock for automatic time stamping of saved readings.
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements.
  • True-RMS AC voltage and current for accurate measurements on non-linear signals.
  • Measure up to 10 A (20 A for 30 seconds).
  • 100 mF capacitance range.
  • Peak capture to record transients as fast as 250 μs.
  • Premium test leads and alligator clips included.
  • Amp jack plugs included.
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
  • Limited lifetime warranty.


  • Digital multimeter designed specifically for HVAC professionals
  • Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
  • Provides microamps to test flame sensors
  • Features low input impedance to helps prevent false readings due to ghost voltage
  • Presents a large white LED backlight for working in poorly lit areas