Powergridm

The PowerGridM design is based on the concept of modularity and establishes a common set of power components that can be configured and re-configured to meet the growing and ever changing demands of deployable systems.

PowerGridM stands alone as the first Uninterruptible Power Supply UPS design to host the advanced Lithium Iron Phosphate (LIP) (LiFePO4) batteries, the first rugged UPS Intelligent Stacking Design allowing attached units to work as a single system, and the first Integrated Plug-And-Play Uninterruptible Power Supply UPS Backplane for automatic stack integration of UPS and Battery Expansion components.

Contact Details

PowergridM

6931 Land O Lakes Blvd.

Land O Lakes, FL 34638

Phone: (813) 996-2583

Phone (Toll-free): 1-800-AJPOWER

Fax: (813) 996-5037

Contact form

Products

PowerGridm - 1000 Watts / VA Standalone UPS

PowerGridm - 1000 Watts / VA Standalone UPS

  • Ruggedized 1U 1000 Watts / VA UPS weighing in at 30 Lbs.
  • Stack and Interconnect Design for 1000/2000/3000/4000 Watts.
  • Dual Hot Swap Battery Modules @ 6 lbs – 15+ Min Hold Time.
  • Field Replaceable AC Input Power Module.
  • Universal AC Input of 100-264 VAC and from 47 – 63, 400 Hz.
  • VAC Output Voltage of 120V 60 Hz.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Start up Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Audible Power Loss Alarm with Enable/Disable Switch.
  • Lightning Protection with Common Safety Ground Connection.

Powergridm - 1500 VA UPS Unit – BackPlane Ready

Powergridm - 1500 VA UPS Unit – BackPlane Ready

  • Ruggedized 1U 1200 Watts / 1500 VA UPS weighing 27 Lbs.
  • Stack & Interconnect Design for 1200/2400/3600/4800/6000 Watts. – 2 interconnected 5U BPMs allow for a total: 12,000 Watts.
  • Hot Swap Battery Module @ 6 Lbs Each – 12+ Min Hold Time.
  • Field Replaceable AC Input Power Module
  • Universal AC Input of 100-264 VAC and from 47-63, 400 Hz.
  • Computer Controlled Inverter Design.
  • BPM based SNMP Based Network Connectivity for Monitoring and Reporting (SNMP V3 Optional).
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Lightning Protection with Common Safety Ground Connection.

PowerGridm - 1500 VA – 1200 Watts Standalone UPS

PowerGridm - 1500 VA – 1200 Watts Standalone UPS

  • Ruggedized 1U 1200 Watts / 1500 VA UPS weighing in at 27 Lbs.
  • Stack and Interconnect Design for 1200/2400/3600/4800/6000 Watts.
  • Hot Swap Battery Module @ 6 Lbs Each – 12+ Min Hold Time.
  • Field Replaceable AC Input Power Module.
  • Universal AC Input of 100-264 VAC and from 47-63, 400 Hz.
  • 48VDC power input support.
  • Computer Controlled Inverter Design.
  • SNMP Based Network Connectivity for Monitoring and Reporting (SNMP V3 Optional).
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Lightning Protection with Common Safety Ground Connection.

PowerGridm - 25Ft. Input Power Cable

PowerGridm - 25Ft. Input Power Cable

  • PowergridM UPS VAC Power Input connection to VAC power source
  • PG-BXM VAC Power Input connection to VAC power source

PowerGridm - 2Ft. Output Power Cable

PowerGridm - 2Ft. Output Power Cable

  • PG800-UPS VAC Output Power connection to PG-RPIM-STD VAC Input Power connection
  • PG800-UPS VAC Output Power connection to PG-RPIM-LBI-STD VAC Input Power connection
  • PG800-UPS VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection
  • PG-BXM VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection

PowerGridm - 3000 VA – 2400 Watts Standalone / Tactical UPS

PowerGridm - 3000 VA – 2400 Watts Standalone / Tactical UPS

  • Ruggedized 2U 2400 Watts / 3000 VA UPS weighing in at 50 Lbs.
  • Available in 1/2/3 phase input power configurations.
  • Stack and Interconnect Design for 2400/4800/7200/9600 watt configurations.
  • Hot Swap Battery Modules @ 12 Lbs Each – 12+ Min Hold Time.
  • Universal AC Input of 100-264 VAC and from 47 – 63, 400 Hz, and DC Input at 42 – 56 VDC.
  • VAC Output Voltage of 120V 60 Hz / 230V 50 Hz.
  • Dual Computer Controlled Inverter Design.
  • SNMP Based Network for Power Management and Reporting.
  • Over Voltage Capacity for Managed In-Rush and Start up Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • Lightning Protection with Common Safety Ground Connection.

PowerGridm - 3U/4U/5U Back Plane Module - 24 VDC Input - PG800 Version

PowerGridm - 3U/4U/5U Back Plane Module - 24 VDC Input - PG800 Version

  • Single 100-264 VAC Input Power for the integrated Stack. (Optional Voltages and Phase configurations available).
  • A 22-30 VDC Input Power Connection for the integrated Stack.
  • Critical Equipment VAC Connections for Connection of Equipment.
  • Optional Non-Critical Equipment VAC Connections (Power Shedding) with No Extended Battery Support.
  • Consolidated SNMP Port for Network Monitoring of Stacked Units.
  • Consolidated Lightning Protection and Safety Ground.
  • 3.5 VDC primary power loss alarm port for connection of a remote audio or visual indicator.
  • Extended Air Intake and Exhaust Plenums for Attached Units.

PowerGridm - 3U/4U/5U Back Plane Module - 48 VDC Input - PG1500 Version

PowerGridm - 3U/4U/5U Back Plane Module - 48 VDC Input - PG1500 Version

  • Single 100-264VAC Input Power for the integrated Stack. (Optional Voltages and Phase configurations available).
  • Multi-BackPlane Synchronization Port for BackPlane stacking.
  • Critical Equipment VAC Connections for Connection of Equipment.
  • Optional Non-Critical Equipment VAC Connections (Power Shedding) with No Extended Battery Support.
  • Consolidated SNMP Port for Network Monitoring of Stacked Units.
  • Consolidated Lightning Protection and Safety Ground.
  • 3 to 5 VDC primary power loss alarm port for connection of a remote audio or visual indicator.
  • Extended Air Intake and Exhaust Plenums for Attached Units.

PowerGridm - 6Ft. Output Power Cable

PowerGridm - 6Ft. Output Power Cable

  • PG800-UPS VAC Output Power connection to PG-RPIM-STD VAC Input Power connection
  • PG800-UPS VAC Output Power connection to PG-RPIM-LBI-STD VAC Input Power connection
  • PG800-UPS VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection
  • PG-BXM VAC Input Power connection to PG-PPC-PDB-5P VAC Output Power connection

Powergridm - 800 Watts / VA Standalone UPS – Tactical UPS

Powergridm - 800 Watts / VA Standalone UPS – Tactical UPS

  • Ruggedized 1U 800 Watts / VA UPS weighing less than 26 Lbs.
  • Stack and Interconnect Design for 800/1600/2400/3200 Watts.
  • Dual Hot Swap Battery Modules. 3 Lbs Each – 9+ Min Hold Time.
  • AC/DC Input Power Connections with Auto Sensing and Switching.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • SNMP Based Network Connectivity for Monitoring & Reporting.
  • Primary Power Bypass Switch and Audible Power Loss Alarm.
  • Lightning Protection with Common Safety Ground Connection.

Powergridm - 800 Watts UPS – BackPlane Module BPM DC Output – Military UPS – Military Power Conditioner

Powergridm - 800 Watts UPS – BackPlane Module BPM DC Output – Military UPS – Military Power Conditioner

  • Ruggedized 1U 800 Watts UPS weighing less than 26 Lbs.
  • DC Output can be configured for 12VDC, 24VDC, 28VDC, or 48VDC.
  • Stack & Interconnect Design for 800/1600/2400/3200/4000 Watts.
  • Dual Hot Swap Battery Modules @ 3 Lbs Each – 9+ Min Hold Time.
  • AC/DC Input Power BackPlane Connections with Auto Sensing/Switching.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • SNMP Based Network Connectivity for Monitoring & Status Reporting hosted within the BPM.
  • Audible Power Loss Alarm.
  • Lightning Protection & Safety Ground Connection via the BPM.
PowerGridm - AC Power Distribution Unit – Military Power Conditioner

PowerGridm - AC Power Distribution Unit – Military Power Conditioner

  • Allows for Consolidation of VAC Input Power from the Source to a Stack.
  • Consolidates cable runs when extending the RPIM to a remote location.
  • Individual Push/Pull Based Breakers for Each Equipment Connection.
  • Remove and Rotate Mounting Brackets for Maximum Flexibility.

Pages


  • Shoot images near... and far. Interchangeable Smart Lenses require no calibration of the thermal camera and give you the versatility and image quality needed to conduct inspections in almost any environment.
  • Find subtle temperature differences easily-with advanced thermal sensitivity
  • Subject to Export Control


Non-contact AC voltage detector and LED flashlight combined in one convenient, compact design. With exclusive dual-sensitivity. The voltage detector glows blue when it's near AC voltage, and glows red when it's at the source. Detects voltages from 40 V AC to 300 V AC. Voltage detector glows blue 50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5 in) away from source. Operating temperature 0 °C to 50 °C. Ultra-bright white LED with 100,000 hour bulb life. AAA battery included.


  • Reduce your risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
  • Prove functionality of the FieldSense measurement on the T6 electrical testers
  • Source both ac and dc steady-state voltage (supplies 240 V dc/ac).
  • Compatible with high impedance multimeters or clamp meters.
  • Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact
  • Includes TPAK magnetic hanging strap
  • Long battery life—2000 tests per set of four AA batteries (10 second test average)
  • SAFETY RATING: IEC61010-1, IEC61010-2-030


Installs and grounds in less than 5 minutes Save time with quick and easy installation with the CV Series – 5 minutes or less.
  • One technician
  • One hole with standard Greenlee® punch
  • Panel door does not need to be removed
  • Grounds instantly to metal enclosure with patent-pending AutoGround™ process
  • Maintains panel arc test ratings up to 63kA when properly installed
Work more efficiently with Fluke ClirVu® CV401 95 mm (4 in) Infrared Windows
  • NFPA 70E processes significantly reduced due to less work permit requirements
  • Faster and more comfortable inspections because full PPE is often not required
  • Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance
  • CV401 is Torture Tested™ to the highest arc blast test ratings IEEE C37.20.7: 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
  • Convenience of both quick turn or security keyed access


The most accurate temperature and humidity graphical data loggers on the market
The DewK measures temperature to ±0.125 °C and humidity to ±1.5% on two channels, and displays it on a big, clear screen. Ethernet, wireless (optional), or RS-232 will allow you to network as many DewKs as you’d like. And the Log Ware III software will allow real-time logging of multiple DewKs, data storage to your computer and seamless integration with MET/CAL® software.
  • Superior accuracy
  • Network enabled
  • Powerful logging and analysis tools
  • Two interchangeable calibrated sensors
  • Huge memory
  • Upgraded software