Powerside

Powerside is a pioneer in Power Intelligence, delivering an integrated range of power monitoring, analysis, and low and medium voltage correction solutions and services. Powerside serves companies in the power and energy, data center, transportation, medical, semiconductor, telecom, manufacturing, military, and government. We have deployed 50,000+ monitoring solutions and delivered 5,000+ correction projects in over 50 countries. The company has headquarters and manufacturing facilities in Montreal, Quebec and Alameda, California.

Contact Details

Powerside

980 Atlantic Ave.

Alameda, California 94501

Phone: 1 (510) 522-4400 | 1 (888) 736-4347

Contact form or Email: sales@powerside.com

Products
Power Analyzers

Line Cards: 

Products

Powerside - PQube 3 Portable Power Analyzer - Portable Model

Powerside - PQube 3 Portable Power Analyzer - Portable Model

Self-powered, ready-to-go portable kit designed for a quick install and temporary power measurement campaigns.

Powerside - PQube 3 Power Analyzer

Powerside - PQube 3 Power Analyzer

Power analyzer, real time sensor and revenue meter. Monitors up to 2 three-phase loads, plus environmental and process parameters.

Powerside - PQube 3e Power Analyzer - Multiple load power quality monitoring

Powerside - PQube 3e Power Analyzer - Multiple load power quality monitoring

Power analyzer, real time sensor and revenue meter. Monitors up to 4 three-phase loads, plus environmental and process parameters.

Powerside - PQube 3r Power Analyzer - Ultra accurate power analyzer and versatile controller

Powerside - PQube 3r Power Analyzer - Ultra accurate power analyzer and versatile controller

Power analyzer, real time controller and revenue meter. Has 4 built-in programmable relay outputs that can be individually assigned to a specific disturbance.

Powerside - PQube 3v Power Analyzer - Voltage quality compliance

Powerside - PQube 3v Power Analyzer - Voltage quality compliance

Voltage compliance analyzer and real time sensor. Monitors the point of common coupling in facilities


  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 60 MHz bandwidth model
  • 625 MS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity*
  • True RMS for accurate AC measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • The optional TPAK magnetic hanger allows the user hands-free flexibility


Fluke 789 Temperature Kit features:

  • Unique new wireless measurement logging capability
  • Temperature measurement from -200 °C to 1372 °C using the t3000 FC
  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with
  • FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA True-RMS digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Simultaneous mA and% of scale readout
  • 20 mA DC current source/loop calibrator/ simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes


  • MATLAB® and LabVIEW® software compatibility allows users to integrate infrared data, images and videos to support R&D analysis
  • 320 x 240 resolution
  • See the details you need with optional smart lenses: 2x and 4x telephoto, wide angle and macro lenses
  • Optimize images, generate customizable reports and export images to the format of your choice with SmartView® desktop software
  • Wirelessly connect your camera to the Fluke Connect® system to easily share and edit images


  • Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
  • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
  • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
  • LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
  • Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
  • Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
  • Save multiple logging sessions before PC download is necessary.
  • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
  • On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
  • Real time clock for automatic time stamping of saved readings.
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements.
  • True-RMS AC voltage and current for accurate measurements on non-linear signals.
  • Measure up to 10 A (20 A for 30 seconds).
  • 100 mF capacitance range.
  • Peak capture to record transients as fast as 250 μs.
  • Premium test leads and alligator clips included.
  • Amp jack plugs included.
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
  • Limited lifetime warranty.