Abaco - CP3-GESW8-TM8 3U CPCI rear-panel I/O transition module with 8 RJ-45 ports for NETernity™ CP3-GESW8 switches

Abaco - CP3-GESW8-TM8 3U CPCI rear-panel I/O transition module with 8 RJ-45 ports for NETernity™ CP3-GESW8 switches
  • Supports 8-port 10/100/1000BaseT Ethernet line speed
  • 3U CompactPCI form factor with rear-panel I/O
  • Rear-panel I/O support for NETernity™ CP3-GESW8 or CP3-GESW8N
  • IEEE 802.3 compliant
  • Ethernet/LAN Resource Center

More

CP3-GESW8-TM8 is a rear-panel I/O transition module providing flexible access to CP3-GESW8 or NETernity™ CP3-GESW8N rear-panel I/O. Up to eight Gigabit Ethernet ports of the switch are accessible from the transition module's stacked RJ-45 connectors. Each Ethernet port is routed as four 100 Ohm differential pairs.

More Product Information

Abaco - TRRM940 8-port transition module for 6U VME NETernity 24-port GbE PICMG 2.16
  • 8 10/100BaseTX ports with RJ45 connectors
  • Transition module for RM940 Ethernet switches
  • Ethernet/LAN Resource Center

Abaco - NETernity™ GBX411 3U VPX Fully Managed Multilayer Ethernet Switch with 12 or 24 GigE plus 4 10GigE ports
  • VICTORY switch compliant
  • 3U VPX form factor
  • VITA 65 OpenVPX Compliant
  • OpenVPX profiles:
  • MOD3-SWH-2F12T
    • 2x 10GBASE-KX4 and 12x 1000BASE-T rear I/O ports
  • MOD3-SWH-2F24U
    • 2x 10GBASE-KX4 and 24x 1000BASE-KX rear I/O ports
  • Optional configurations:
    • 8x 1000BASE-T, 8x 1000BASEKX and 2x 10GBASE-KX4 rear I/O ports
    • 4x 1000BASE-T, 16x 1000BASEKX and 2x 10GBASE-KX4 rear I/O ports
  • Two SFP+ 10GBASE fiber ports on front panel available for air cooled models
  • Serial Console
  • OpenWare™ Switch Management Software
  • Wire speed Layer 2/3 switching including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier

Abaco - PMC-GBIT-DT2BP Network Interface Card, PMC with Dual 1000BaseT/100BaseTX/10BaseT Rear Panel Gigabit Ethernet Interfaces
  • Dual 10BaseT / 100BaseTX / 1000BaseT network interface card with rear panel access
  • Single-wide 32/64-bit 33/66 MHz PCI, 66/133MHz PCI-X PMC
  • Auto-negotiating protocol selection
  • Transmit and receive FIFOs
  • Drivers for VxWorks®, Linux®, Windows® NT and Windows 2000 available
  • Supports Jumbo frames
  • Rear panel access provided by the PIMGBIT- DT module; module has two RJ-45 connectors and LED indicators for link, speed and activity X

Abaco - NETernity™ GBX25 Highly flexible, L3 Managed 6U VME NETernity Ethernet Switch
  • Fully managed L2/L3 switching and routing with OpenWare
  • 340Gbits/s switch fabric, allowing full wire speed on all ports
  • Up to 4 SFP+ cages supporting 10G operation
  • Up to 24 SFP cages
  • Up to 24 rear BASE-T ports
  • Support for: 100BASEFX, 10/100/1000BASE-T, 1000BASE-SX, 1000BASE-LX, 10GBASE-SR, and 10GBASE-LR SFP/SFP+ modules
  • Single- and double slot configurations
  • Front, rear and dual I/O focused configurations
  • RoHS compliant
  • Ruggedization levels 1-3 (and -40C to +75C option for double slot configurations)

Abaco - NIC10G Dual 10GbE XMC Card with Front or Rear I/O
  • Two 10GbE ports
  • Front or Rear I/O
  • XMC Form Factor
  • Intel 82599ES Dual 10GbE Controller
  • Air and conduction cooled versions
  • Supports Jumbo Frames
  • 128 Transmit Queues
  • 64-bit address support
  • Dual SFP+ ports on front panel supporting 10GBASE-SR, 10GBASE-LR, 10GSFP+Cu
  • Bi-color LED for 10Gb/s Link status and Activity per port
  • Eight (8) Lanes PCI-Express (Gen2)
  • Support for Data Center Bridging (DCB) (802.1Qaz, 802.1Qbb, 802.1p)
  • Rear I/O supports CX4 and KX4
  • 802.1q VLAN support
  • Support for Microsoft® Windows®, Linux® and VxWorks®
  • RoHS compliant
  • Option for PXE Boot

Abaco - NETernity SWE440A Fully Managed 3U VPX 10/40GigE Ethernet Switch
  • 3U VPX form factor
  • VITA 65 OpenVPX compliant
  • OpenVPX profiles:
    • MOD3-SWH-6F8U-16.4.10-n
    • MOD3-SWH-6F6U-16.4.1-n
    • MOD3-SWH-32U
  • Other profiles are supported - on request
  • Supports connectivity and performance options for 40GBase-KX4, 10GBase‑KR, 10GBase-KX4 and 1000BaseKX.
  • Serial Console
  • OpenWare™ Switch Management Software
  • Wire speed Layer 2/3 switching including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier
  • Allows up to 4,096 VLANS
  • L-3 protocol support including OSPF, RIP and VRRP
  • Precision Time Protocol 1588v2 Transparent Clock Support
  • Conduction-cooled
  • Rugged Levels 4 and 5 available
  • Built-in Test
  • Denial-of-service attack prevention
  • Sanitization capability
  • Board Management Microcontroller (BMM)
  • Spanning Tree and Link Aggregation
  • Remote management via Telnet, SSH and SNMPv3
  • Support for Jumbo Frames up to 9KB
  • Support for IGMP Snooping Querier and MLD Snooping

Abaco - NETernity SWE440S Fully Managed 3U VPX 10/40GigE Ethernet Switch, Aligned with SOSA
  • 3U VPX form factor
  • SOSA profile aligned for:
    • MOD3-SWH-6F1U7U-16.4.15
    • MOD3-SWH-6F8U-16.4.16
  • VITA 65 OpenVPX compliant
  • Various OpenVPX profiles including:
    • MOD3-SWH-6F8U-16.4.10-n
    • MOD3-SWH-6F6U-16.4.1-n
  • Supports connectivity and performance options for 40GBase-KX4, 10GBaseKR, 10GBase-KX4 and 1000BaseKX.
  • Serial Console
  • OpenWare™ Switch Management Software
  • Wire speed Layer 2/3 switching including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier
  • Allows up to 4,096 VLANS
  • L-3 protocol support including OSPF, RIP and VRRP
  • Precision Time Protocol 1588v2 Transparent Clock Support
  • Conduction-cooled
  • Rugged Levels 1 and 5 available
  • Built-in Test
  • Denial-of-service attack prevention
  • Sanitization capability
  • Board Management Microcontroller (BMM)
  • Spanning Tree and Link Aggregation
  • Remote management via Telnet, SSH and SNMPv3

Abaco - NETernity SWE540A Fully Managed 6U VPX 40/10GigE Data Plane Ethernet Switch
  • 6U VPX form factor
  • VITA 65 OpenVPX Compatible
  • OpenVPX profiles: MOD6-SWH-16U20F, MOD6-SWH20U19F and MOD6-SWH-16U16F
  • Four QSFP+ and two 1000BaseT ports on front panel available for air-cooled models
  • 720Gbps overall bandwidth
  • Serial Console
  • OpenWare™ Switch Management Software
  • Data switching and routing at fabric speed including IPv6
  • Multicast support: IGMP Snooping Querier and MLD Snooping Querier
  • Allows up to 4,096 VLANS
  • L-3 protocol support including OSPF, RIP and VRRP
  • Precision Time Protocol 1588v2 Transparent Clock Support
  • Air-cooled and conduction-cooled
  • Rugged levels 1 to 3 and 5 available
  • Built-in Test
  • Denial-of-service attack prevention
  • Sanitization capability
  • IPMI Controller
  • Spanning Tree and Link Aggregation
  • Remote management via Telnet, SSH and SNMP
  • Support for Jumbo Frames up to 9KB
  • ECC protection management processor memory

Abaco - NETernity™ PMC942RC Layer 2 Unmanaged Gigabit Ethernet Switch and NIC in PMC Form Factor
  • Eight 10/100/1000BaseTX autonegotiating ports, supports full or half duplex
  • Four ports accessible from front RJ45 connectors, three ports routed to P4
  • One port GigE controller appears as a Network Interface to the host
  • Onboard NIC is connected to the eighth port on the switch
  • Serial console signals routed to P4
  • Full wire speed Layer 2 switching on all ports
  • Capability to fix port Ethernet speed and duplex settings
  • 4K MAC address table
  • Auto address learning
  • Auto address aging
  • RoHS Compliant
  • Wide operating temperature option -20°C to +70°C

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com