Abaco - Floating Point FFT, IEEE-754 Floating Point FFT/IFFT IP Core

Abaco - Floating Point FFT, IEEE-754 Floating Point FFT/IFFT IP CoreAbaco - Floating Point FFT, IEEE-754 Floating Point FFT/IFFT IP Core
Abaco Systems' Floating Point FFT core is the most flexible IEEE-754 compliant FFT core available in the FPGA world. Designed for high performance programmable devices from Xilinx and Altera, this core performs Fast Fourier Transforms ranging from 256 points to 64M points and is ideal for high precision spectral analysis, radar and video processing applications. Download our bit-true model for 1D and 2D FFT.

More

Radix-32 vs Radix-2

This core is designed around a Radix-32 butterfly architecture. With equal performance, the memory resources and bandwidth required by our core are five times less than a design comprising five Radix-2 cores in parallel. Smart IP solutions increase board efficiency and reduce the price of digital signal processing systems.

Device resources usage for IEEE-754 implementation

The following graph displays the signal-to-noise ratio of a Fast Fourier Transform performed over a 1,024 points random vector with a 24-bit wide mantissa and 8-bit wide exponent. The software Discrete Fourier Transform was calculated using the FFTw functions.

A fully functional VHDL test bench and bit-true software development kit are delivered along the FFT/IFFT core for simulation purposes and specific performance characterization.

More Product Information

Abaco - Fixed Point FFT/IFFT IP Core
Abaco Systems' fixed point FFT cores are the most efficient and fastest available in the FPGA world. With a revolutionary architecture for efficient memory usage and balanced use of arithmetic and logic resources, we offer complete FFT solutions with any input resolution up to 2Gsps. Whether you require a forward FFT, Inverse FFT, a 2D FFT, correlation or any algorithm efficiently performed with a Fourier transform, our technology will offer you the best solution for a cost-effective implementation.

Crystal Rugged - Ruckus Wireless Access Point
  • Small form factor
  • IP-67 and industrial temperature rated
  • Ruckus E510 802.11ac Wave 2 access point (AP)
  • Improve throughput with ChannelFly, which dynamically finds less congested Wi-Fi channels to use
  • Extended coverage with patented BeamFlex+™ adaptive antenna technology utilizing multi-directional antenna patterns
  • Deploy Wi-Fi in previously unreachable environments

AR Modular - KMW2026-M5 30 Watts, 30 - 512 MHz Amplifier Module with Break Point
The Model KMW2026M5 is an RF power amplifier module for OEM applications or integration into a user system. In addition, the KMW2026 has a ‘break’ in the amplifier chain with an SMA connector out and SMA connector in, allowing an external filter to be fitted. Multi-stage blanking is incorporated for minimum broadband noise when unkeyed. Cooling requirements defined by the data provided below and protection of the output devices against output mismatch are the responsibility of the user.

Abaco - DSP282A  Dual Intel 5th Gen Quad Core i7 6U OpenVPX Deployed Server Platform
  • Two Intel® Core™ i7-5700EQ CPUs
    • Four cores, eight threads per CPU
    • Two channels ECC 1600-DDR3L
    • 16 GBytes DDR3L
    • AVX2.0 Advanced Vector Extensions
    • HD-5600 on-chip graphics
  • Two platform controller hubs
    • 16 MBytes BIOS Flash per PCH
    • 16 GBytes SATA NAND Flash
    • 256 Kbytes NRAM
  • Platform security
    • Configurable security hub FPGA
    • Intel Trusted Execution
    • Intel vPRO/AMT technology
    • Intel ES new instructions
  • Firmware support
    • Built-in Test
    • UEFI BIOS
  • Operating system support
    • Linux® SDK
    • Windows® SDK
    • WRS VxWorks® BSP
    • WRS Hypervisor
  • Middleware and Libraries
    • AXISPro application dev. framework with AXISFlow and AXISmpi communication libraries
    • AXISLib VSIPL and RSPL multithreaded DSP and math libraries for VxWorks, Linux and Windows
    • Abaco signaland image processing quick start examples
    • Intel OpenCL SDKs, IPP and MKL

Abaco - SBC627 6U OpenVPX 5th Generation Intel® Core™ i7-based Single Board Computer
  • SmartFusion2
  • 6U OpenVPX single board computer
  • 5th Generation Intel® Core™ i7
  • Soldered DDR3 SDRAM with ECC
  • Up to 64 GB solid state disk drive
  • Up to 6 MB shared cache
  • Multiple Data Plane Fabric Configurations (10/40GE)
  • Multiple PCIe® Expansion Plane Fabric configurations
  • Both rear & front I/O ports
  • On-board expansion sites
  • Trusted Platform Monitor (TPM)
  • Elapsed Time Indicator (ETI)
  • Rich software choice, including Deployed Test Software, plus operating systems support for Microsoft® Windows / Open Linux® and real-time operating system support

Abaco - SBC326 4th Generation Intel® Core™ i7 Based Rugged 3U VPX Single Board Computer
  • Single slot 3U VPX Single Board Computer
  • 4th Generation Intel Core i7 quad core processor (6 MB shared cache)
  • Two channels of soldered DDR3 SDRAM with ECC up to 16 GB
  • Up to 32 GB NAND Flash
  • Rear IO:
    • 8x PCIe lanes from Gen-3 capable switch
    • Up to 3 Gigabit Ethernet Ports (either one 1000BaseT plus two 1000BaseBX or two 1000BaseT)
    • 1x DVI / HDMI as standard
    • 1x SATA 6 Gb/s port as standard (plus additional two SATA 6 Gb/s ports on some variants)
    • 2x COM ports
    • 2x USB 2.0 ports (plus an additional USB 3.0 port on some variants)
    • Audio (available on some variants)
    • Up to 6x GPIO
  • Five Levels of Ruggedization (Convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks® OS support

Abaco - SBC346 4th Generation Intel® Core™ i7-based Rugged 3U VPX Single Board Computer
  • Single slot 3U VPX single board computer
  • 4th Generation Intel® Core™ i7 quad core processor (6 MB shared cache)
  • Two channels of soldered DDR3L SDRAM with ECC up to 16 GB
  • Up to 32 GB NAND Flash
  • Rear I/O
    • Up to 3x Gigabit Ethernet ports (either one 1000BASE-T plus two 1000BASE-BX or two 1000BASE-T)
    • 1x VGA port
    • 2x SATA 6 Gb/s ports
    • 2x COM ports
    • Up to 4x USB 2.0 ports
    • Audio (available on some variants)
    • Up to 8x GPIO
  • Five levels of ruggedization (convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks® support

Abaco - XVR16 4th Generation Intel® Core™ i7 Based Rugged VME Single Board Computer
  • Single slot 6U VME Single Board Computer
  • 4th Generation Intel Core i7 quad core processor
  • Two channels of soldered DDR3 SDRAM with ECC up to 16 GB
  • Up to 6 MB shared cache
  • Up to 64 GB NAND Flash
  • On-board Expansion sites
    • 2x XMC - x8 PCIe Gen 3 capable
    • 2x PMC - PCI-X 133 MHz
  • Front I/O:
    • 2x Gigabit Ethernet ports (second port is optionally available)
    • 1x DisplayPort
    • 2x USB ports (USB 3.0 optional)
    • 1x COM port
    • 1x Power button
    • 1 x eSATA (optional)
  • Rear IO: 2x Gigabit Ethernet ports (VITA 31.1)
    • 2x VGA
    • 2x DVI
    • 2x SATA Gen3 ports, RAID capable
    • 2x COM ports
    • 2x USB 2.0 ports
    • 1x Audio
    • 12x GPIO
    • 2x PMC rear I/O
    • 2x XMC rear I/O
  • BIOS backup Flash
  • Optional on-board SATA HDD
  • Optional conduction cooling
  • Optional extended operating temperature range
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks® OS support
  • Five Levels of Ruggedization

Abaco - SBC329 Rugged 3U VPX Single Board Computer with Intel® Xeon® Processor (7th Generation Intel Core™ Technology)
  • Single slot 3U VPX Single Board Computer
  • Intel Xeon E3-1505M or E3-1505L v6 quad core CPU (7th Generation Intel Core technology)
  • Up to 16 GB DDR4 SDRAM with ECC
  • 32 GB NAND Flash
  • 512 kB NVRAM
  • FPGA with advanced security features
  • TPM (Trusted Platform Module)
  • 8 PCIe lanes (Gen 3 capable) switch
  • Rear IO:
    • Up to 3x Gigabit Ethernet ports
    • Up to 2x DVI / HDMI ports
    • Up to 3x SATA ports
    • Up to 2x COM ports
    • Up to 3x USB ports
    • Up to 4x GPIO lines
  • Five levels of ruggedization (convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Windows®, Linux® and VxWorks® OS support

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com