Abaco - FMC126 high pin count FMC ADC, 4-channel 10-bit ADC - 5 Gsps

Abaco - FMC126 high pin count FMC ADC, 4-channel 10-bit ADC - 5 Gsps
  • Quad - Dual - Single 10-Bit Channel Operation
    • 4-Channel 1.25 Gsps A/D conversion Mode
    • 2-Channel 2.50 Gsps A/D conversion Mode
    • 1-Channel 5.00 Gsps A/D conversion Mode
  • VITA 57.1-2010 compliant
  • 1.5V to 3.3V VADJ operation
  • Conduction Cooled
  • 1.25Gsps DDR LVDS outputs
  • Coax front panel inputs on SSMC connectors
  • Single ended AC-coupled analog inputs
  • Flexible clock tree enables
    • internal clock
    • external clock
  • cascading multiple boards (optional)
  • HPC (high-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant (optional)

More

The FMC126 is a quad-channel multi-mode A/D FMC, fully compliant with VITA 57.1 standards.

The card provides four 10-bit ADC channels that enable simultaneous sampling of 4, 2, or 1 channel with a maximum sample rate of 1.25 GSPS (4-channel mode), 2.5 GSPS (2-channel mode), or 5.0 GSPS (1-channel mode).

The sample clock can be supplied externally through a coax connection or supplied by an internal clock source (optionally locked to an external reference). Additionally a trigger input for customized sampling control is available.

The FMC126 daughter card is mechanically and electrically compliant to the FMC standard as established by ANSI/VITA 57.1. It has a HPC (high pin count) compatible connector, front panel I/O, and can be used in a conduction cooled environment.

The design is based on the E2V Quad A/D EV10AQ190 chip-set having DDR LVDS outputs. The analog signal inputs are available on the front panel on coax connections and have individual calibration circuits for fine-tuning of gain, offset, and phase.

The FMC126 allows flexible control of clock source, sampling frequency, and calibration through the I2C serial communication bus. Further, the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions.

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

More Product Information

Abaco - FMC120 Four Channel 16-Bit A/D up to 1.0 Gsps. Four Channel 16-Bit D/A up to 1.25 Gsps
  • 4-Channels 16-bit 1.00 Gsps A/D
    • 1.5 GHz Analog Bandwidth
    • Usable in the 3rd Nyquist Zone
  • 4-Channels 16-bit up to 1.25 Gsps D/A
    • 2.8 GSPS Update Rate
    • Onboard 48-Bit NCO for Flexible Signal Placement
  • VITA 57.1 HPC compliant
  • Conduction Cooled – Standard Option
  • DC coupled analog input.
  • Internal clock or external clock
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC – High Pin Count Connector
  • 10 front panel SSMC or MMCX connectors
  • 2Kbit EEPROM (M24C02- WDW) accessible from the Host via I2C bus

Abaco - FMC216 high pin count FMC DAC, 16-channel 16-bit DAC – 312.5 Msps
  • 16 channel 16-bit 312.5Msps D/A conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on DAC39J84
  • 1.65V to 3.3V VADJ operation
  • Single ended DC coupled outputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (High-Pin Count) 400 pins connector
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies with SMA connectors
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC116 high pin count FMC ADC, 16-channel 14-bit ADC - 125 Msps
  • 16 channel 14-bit 125 Msps A/D conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on LTC2175-14
  • 1.5V to 3.3V VADJ operation
  • Single ended DC coupled inputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (high-pin count) compatible
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies
  • Optional SSMC/MMCX clock and trigger IO on the back of the FMC (consult factory)
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC168 low pin count FMC, 8-channel 16-bit ADC - 250 Msps
  • Eight channel 16-bit 250MSPS A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2010 compliant
  • Based on TI ADS42LB69
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Flexible clock tree enables:
    • internal clock
    • internal clock locked to an external reference
    • external clock
    • external sync / 1PPS
  • LPC (low-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant - Optional

Abaco - ICS-8580 2-Channel High-Definition or 4-Channel Standard Definition H.264 Video encoder/decoder
  • Real-time multi-channel encoding and decoding for transmission of video over IP data link
  • ITU-T H.264 AVC Codec (MPEG4 Part 10) Main Profile with configurable codec parameters
  • MPEG2 TS multiplexing with audio and metadata encapsulation
  • Data rates from 512kbps to 20Mbps <60ms Latency
  • 1 to 2 channels of HD encoded video up to 1600 X 1200@30fps
  • 1 to 4 channels of Standard Definition video
  • Input sources supported: HD/SD SDI (SMPTE259M/292M), NTSC/ PAL, HDTV (1080p/720p), CVBS, S-Video, Component
  • Support for Base Cameralink input devices
  • Stereo Audio I/O with synchronization to video
  • Metadata Ingest through Ethernet and PCIe
  • Output video formats supported: HD/SD SDI, SDTV, HDTV, CVBS, S-Video, Component
  • PCIe Gen1 x4 Data link for Raw/ Compressed Video Transport, Metadata and H/W configuration
  • Configuration control through Ethernet/PCIe Webserver or programmable API
  • Support for direct record/playback from NAS data storage
  • Video compression SDK/API for fast integration into enterprise applications
  • Multiple OS support for API and device drivers

Abaco - GR4 3U VPX High Performance Quad Channel Video Capture Board
  • HPC video capture board
  • 3U VPX form factor, 1” Pitch
  • NVIDIA Pascal ™ class GPU: Quadro P5000 MXM
    • 6.4 TFLOPs peak FP32 performance
    • 2,048 CUDA cores, 16GB GDDR5 Quadro P3000 MXM
    • 3.9 TFLOPs peak FP32 performance
    • 1,280 CUDA cores, 6GB GDDR5
  • 4x 3G-SDI inputs and 4x 3G-SDI outputs - SMPTE 424M - 1080p@60Hz
  • 1x DisplayPort output - 1.1a/1.2 - 4K @60Hz
  • PCI Gen 3 - x8 or x4 lanes
  • Windows and Linux drivers on x86
  • NVIDIA CUDA 6.1, OpenCL™ 1.2 and NVIDIA software suite
  • Conduction-cooled

Abaco - GR2 3U VPX High Performance Dual Channel Graphics Output Board
  • HPC graphics output board
  • 3U VPX form factor, 1” pitch
  • NVIDIA Pascal GPU: Quadro P5000 MXM
  • 6.4 TFLOPS peak FP32 performance
  • 2,048 CUDA cores, 16GB GDDR5 or Quadro P3000 MXM
  • 3.9 TFLOPs peak FP32 performance
  • 1,280 CUDA cores, 6GB GDDR5
  • 2x DisplayPort 1.4 outputs - 4K @ 60Hz
  • PCI Gen 3 - x16, x8, x4 lanes
  • Windows and Linux drivers on x86
  • NVIDIA CUDA 6.1, OpenCL™ 1.2 and NVIDIA software suite
  • Air-cooled and conduction cooled

Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC
  • ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate)
  • AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS data rate)
  • RF input bandwidth up to 3.2 GHz and output up to 2.6 GHz in x2 interpolation mode
  • JESD204B (A/D), LVDS (D/A) FPGA data buses
  • Single-ended AC-coupled analog signals
  • 6 SSMB connectors available from the front panel
  • Clock source, sampling frequency and calibration through I2C communication
  • buses
  • Flexible clock tree enables
    • on board VCO - 1.5 to 2.6 GHz
    • external reference clock
    • external sampling clock
  • Multi-board synchronization capable
  • ANSI/VITA 57.1 compliant
  • HPC (high pin count) compatible
  • Conduction-cooled configuration available on Abaco FPGA carrier cards

Abaco - ICS-1572A 2-Channel, 250 MHz 16-bit ADC, 2-Channel 500 MHz 16-bit DAC XMC Module
  • 2 Transformer-coupled Analog Inputs, 16 bits, Fs ≤250 MHz per channel
  • 2 Transformer-coupled Analog Outputs, 16 bits, Fs ≤500 MHz per channel
  • Xilinx Virtex-6 LX240T User Programmable FPGA standard, other devices available as an option
  • PCI-e x8 Master/Target Burst Mode DMA capable
  • VxWorks, Linux and Microsoft® Windows® software drivers

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com