Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module

Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module
  • Two operational modes
    • 4 channels, 12-bit, 3.2GSPS data rate
    • 2 channels, 12-bit, 6.4GSPS data rate
  • VITA 57.4 HSPC FMC+ site required
  • 16 JESD204B lanes at 12.8GBPS
  • 8 JESD204B lanes passed to board topside for FMC stacking
  • Optional FMC+e connection for additional stacked serial lanes
  • Conduction cooled configuration available
  • AC-coupled analog input
  • 9 front panel MMCX connectors
  • Internal or external clock
  • MIL-I-46058c conformal coating (optional)
  • 2Kbit EEPROM (M24C02-WDW) accessible from the host via I2C bus
  • Full-featured board support package.
    • Open source VHDL reference design
    • Open source C/C++ reference examples. Windows® and Linux® support.
    • JESD204B core included
    • Simplified IP integration with StellarIP

More

The FMC134 provides customers with a high bandwidth and high channel count I/O solution that is ideal for multi-channel receivers in a wide range of applications.

With four 12-bit analog-to-digital channels up to 3.2GSPS or two analog channels up to 6.4GSPS, the FMC134’s design is based on the Texas Instruments™ ADC12DJ3200 and is mechanically and electrically compliant with the FMC+ standard (VITA 57.4), the next generation of small form factor expansion I/O for high performance FPGA-based systems.

The A/D JESD204B data interface connects to an FPGA using 16 of the 24 high speed serial lanes available on an FMC+ high serial pin count (HSPC) connector. The unused eight high speed serial lanes are passed to the top of the board, enabling the potential for FMC stacking.

The sample clock can be supplied externally through a coax connection or supplied by an internal clock source (optionally locked to an external reference) for multi-board and multi-channel synchronization.

The board also includes an external trigger input and two reference outputs that can be enabled for multi-board synchronization.

The front panel I/O can optionally be populated with MMCX or SSMC coaxial connectors. Analog I/O is AC-coupled.

When paired with the latest FPGA carrier cards with FMC+ sites - such as the Abaco VP880 or the VP868 with Xilinx® Ultrascale™ technology - customers can implement high performance algorithms on an industry standard platform.

More Product Information

Abaco - FMC172 FPGA Mezzanine Card, Wideband Low Latency FMC Module
  • Single-channel, 10-bit A/D up to 6.4GSPS
  • Single-channel, 10-bit D/A up to 6.0GSPS
  • VITA 57.1 FMC compliant
  • Conduction-cooled version available (Deviation from Standard)
  • AC-coupled analog signals
  • 5 SSMC front panel connectors
  • Sampling frequency and calibration through I2C communication
  • Flexible clock tree enables:
    • Internal clock source
    • External reference clock
  • Trigger signal to enable multiboard synchronization
  • Power-down modes to switch off unused functions for system power savings
  • MIL-I-46058c Conformal Coating compliant (optional)

Abaco - FMC424 FPGA Mezzanine Card, Stackable QSFP+ Module
  • Dual QSFP+
  • 10.3125 Gbps per transceiver, 82.5 Gbps total data rate
  • GBT FMC connector signaling
  • ANSI/VITA 57.1-2010 electrically compliant
  • 1.5V to 3.3V VADJ operation
  • High Pin Count (HPC) connector
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC407 FPGA Mezzanine Card, Clock and Trigger Distribution FMC
  • External clock input and onboard VCO
  • External reference input and onboard reference (30.72MHz)
  • Eight synchronized clock outputs
    • 34.375MHz-4.4GHz
  • Eight synchronized trigger or 1PPS outputs
  • Onboard GPS receiver for accurate data time stamping
  • Fully controllable from FMC connector
  • VITA 57.1 compliant
  • LPC (low-pin count) compatible
  • Conformal Coating (optional)
  • Conduction cooled (optional)
  • A breakout cable on the front panel makes all clock and trigger signals available on individual SMA sockets.

Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC
  • ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate)
  • AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS data rate)
  • RF input bandwidth up to 3.2 GHz and output up to 2.6 GHz in x2 interpolation mode
  • JESD204B (A/D), LVDS (D/A) FPGA data buses
  • Single-ended AC-coupled analog signals
  • 6 SSMB connectors available from the front panel
  • Clock source, sampling frequency and calibration through I2C communication
  • buses
  • Flexible clock tree enables
    • on board VCO - 1.5 to 2.6 GHz
    • external reference clock
    • external sampling clock
  • Multi-board synchronization capable
  • ANSI/VITA 57.1 compliant
  • HPC (high pin count) compatible
  • Conduction-cooled configuration available on Abaco FPGA carrier cards

Abaco - PEX442 6U VPX Mezzanine Carrier Card
  • 6U VPX and VPX-REDI form factors with optional front and rear side covers for 2 Level Maintenance requirements
  • Supports up to three mezzanines
    • Two PMC/XMC modules
    • One AFIX module
  • Mezzanine I/O routed to VPX backplane
  • Non-blocking Gen 2 PCI Express switch with four x4 ports to the backplane
  • Air and rugged conduction cooled variants

Abaco - VP889 Virtex Ultrascale+ FPGA, Zynq Ultrascale+ and FMC+, 3U OpenVPX FPGA Card
  • Dual FPGA architecture
    • Virtex Ultrascale+
    • Zynq Ultrascale+ MPSoC
  • 8GB DDR4 mapped to FPGA
  • 2GB DDR4 mapped to Zynq
  • VITA 57.4 HSPC FMC+ site interfacing with the Ultrascale FPGA
  • Conduction cooled configuration available
  • VITA 66.4 optical interface via FireFly BLAST site
  • Up to two COM ports from the Zynq to the backplane
  • 1 GB Ethernet PHY to backplane
  • Front panel USB UART
  • SATA 3.0, DisplayPort to backplane RTM
  • VPX backplane GPIO
  • I2C interface P0 to Zynq
  • Operating system support
    • Linux®
    • Windows®
    • VxWorks®
  • Full-featured Board Support Package (BSP)
    • Open VHDL reference design
    • Open C/C++
    • PCIe™ core included with BSP
    • Peta Linux® reference design

Abaco - PNIC1G PCI Mezzanine Card (PMC) Dual/Four Channel 10/100/1000 Mbit/s Ethernet
  • Software support for Intel™ I210IT at www.intel.com
  • For operating systems not supported by Intel™, please contact Abaco Systems

Abaco - VP880 / VP881 3U OpenVPX FPGA Card
  • Dual FPGA architecture
    • Kintex or Virtex Ultrascale
    • Zynq Ultrascale+ MPSoC
  • 8GB DDR4 mapped to FPGA
  • 2GB DDR4 mapped to Zynq
  • VITA 57.4 HSPC FMC+ site interfacing with the Ultrascale FPGA
  • Conduction Cooled Configuration Available
  • VITA 66.4 optical interface via FireFly BLAST site
  • Up to two COM ports from the Zynq to the backplane
  • 1 GB Ethernet PHY to Backplane
  • Front Panel USB UART
  • SATA 3.0, Display Port to Backplane RTM
  • VPX Back plane GPIO
  • I2C Interface P0 to Zynq
  • Operating system support
    • Linux®
    • Windows®
    • VxWorks®
  • Full-featured Board Support Package (BSP)
    • Open VHDL reference design
    • Open C/C++
    • PCIe™ core included with BSP
    • Peta Linux® reference design

Abaco - VP680 FPGA Card, Virtex™ 6 3U VPX VITA 46 Compliant FMC carrier
  • Virtex-6 LX130T, LX240T, LX365T, SX315T, SX315T, SX475T
  • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH.
  • VPX VITA 46 Compliant
  • Front Panel FPGA Mezzanine Card (FMC)
  • UART over USB
  • Gen 1 and Gen 2 PCI express
  • VITA 48.2 compliant (1 inch Pitch)

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com