Abaco - FMC160 FMC VITA 57.1 Compliant, Single channel 12-bit 3.6Gsps A/D and 14-bit 5.7Gsps D/A

Abaco - FMC160 FMC VITA 57.1 Compliant, Single channel 12-bit 3.6Gsps A/D and 14-bit 5.7Gsps D/A
  • One ADC12D1800: Single channel 12-bit 3.6Gsps
  • One AD9129: Single channel 14-bit D/A up to 5.7 Gsps (2.85Gsps without 1:2 interpolation) - LVDS
  • VITA 57.1-2010 compliant
  • Conduction Cooled - Standard Option
  • Single ended AC-coupled analog signals
  • 6 MMCX/SSMC connectors available from the front panel
  • 4 LVTTL signals available from an HDMI connector on the front panel
  • 4 Xilinx MGT available from an HDMI connector on the front panel
  • Clock Source, Sampling Frequency through SPI communication busses
  • Flexible clock tree enables:
    • on board VCO: 2200MHz - 4400MHz
    • external reference clock
    • external sampling clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC (high-pin count) compatible
  • LVDS IO signaling X

More

The FMC160 provides one 12-bit A/D channel at 3.6Gsps and one 14-bit D/A channel at 5.7Gsps (2.85Gsps direct RF synthesis) clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users. It is mechanically and electrically compliant with the FMC standard (ANSI/VITA 57.1).

With a high-pin count connector, front panel I/O, and able to be used in a conduction cooled environment, the design is based on Texas Instruments' ADC12D1800 Analog-to-Digital converter and Analog Devices' AD9129 Digital-to-Analog converter. The analog signals are AC-coupled, connecting to MMCX or SSMC coax connectors on the front panel.

The FMC160 allows flexible control on clock source through serial communication buses.

Furthermore, the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions in order to reduce system-level power consumption. It is well suited for low power applications such as airborne where the highest level of performance is required while ensuring that mission range is not affected.

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

More Product Information

Abaco - VP780 Virtex™ 7 3U VPX, VITA 46 Compliant with FMC site and optional VITA 67 I/O
  • Virtex-7 XC7VX485T, XC7VX690T,
  • XC7VX980T, XC7VX1140T.
  • 2GBytes of DDR3 SDRAM in 4 independent 8-bit banks.
  • High density Memory Options using BLAST sites: additional DDR3 SDRAM (upto 8GB), QDR2+ SRAM (16MB), NAND FLASH.
  • VPX VITA 46 Compliant
  • Optional VITA 67 I/O
  • Front Panel FPGA Mezzanine Card (FMC)
  • Uart over USB

Abaco - VP680 FPGA Card, Virtex™ 6 3U VPX VITA 46 Compliant FMC carrier
  • Virtex-6 LX130T, LX240T, LX365T, SX315T, SX315T, SX475T
  • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH.
  • VPX VITA 46 Compliant
  • Front Panel FPGA Mezzanine Card (FMC)
  • UART over USB
  • Gen 1 and Gen 2 PCI express
  • VITA 48.2 compliant (1 inch Pitch)

Abaco - FMC176 FMC VITA 57.1 Compliant, Quad 250Msps A/D - Dual 5.6Gsps D/A @ 14-bit
  • Two AD9250: 4-channel 14-bit A/D up to 250 Msps - JESD204B
  • Two AD9129: 2-channel 14-bit D/A up to 5.6 Gsps (2.8Gsps without 2:1 interpolation) - LVDS
  • VITA 57.1-2010 compliant
  • Conduction Cooled - Standard Option
  • Single ended AC-coupled analog signals
  • 10 MMCX/SSMC connectors available from the front panel
  • Clock Source, Sampling Frequency, and Calibration through a SPI communication busses
  • Flexible clock tree enables:
    • on board VCO: 2300MHz - 2650MHz
    • external reference clock
    • external sampling clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC (high-pin count) compatible
  • LVDS IO signaling

Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC
  • ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate)
  • AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS data rate)
  • RF input bandwidth up to 3.2 GHz and output up to 2.6 GHz in x2 interpolation mode
  • JESD204B (A/D), LVDS (D/A) FPGA data buses
  • Single-ended AC-coupled analog signals
  • 6 SSMB connectors available from the front panel
  • Clock source, sampling frequency and calibration through I2C communication
  • buses
  • Flexible clock tree enables
    • on board VCO - 1.5 to 2.6 GHz
    • external reference clock
    • external sampling clock
  • Multi-board synchronization capable
  • ANSI/VITA 57.1 compliant
  • HPC (high pin count) compatible
  • Conduction-cooled configuration available on Abaco FPGA carrier cards

Abaco - PMC-5565PIORC Reflective Memory Node Card Fiber-optic RoHS-compliant PMC
  • Dynamic packet size, 4 to 64 bytes of data
  • Connection with multimode fiber up to 300m, single mode fiber up to 10km
  • Up to 256 nodes
  • Data written to memory in one node is also written to memory in all nodes on the network
  • High speed, easy to use fiber-optic network (2.12 Gbaud serially)
  • Transfer rate 43 Mbyte/s (4 byte packets) to 170 Mbyte/s (64 byte packets)
  • 128 Mbyte or 256 Mbyte SDRAM Reflective Memory
  • One independent DMA channel
  • Any node on the network can generate an interrupt in any other node on the network or in all network nodes with a single command
  • Error detection
  • Redundant transfer mode for extra error suppression
  • No processor overhead
  • No processor involvement in the operation of the network
  • PCI 64-bit 66 MHz transfers, 3.3 or 5V, single width mezzanine interface

Abaco - IMP3B 3U CPCI QorIQ-based Single Board Computer
  • QorIQ processor up to 1.0 GHz - Two e500v2 cores
    • Shared 512 KB L2 Cache with ECC
    • Integrated DDR3 memory controller with ECC
  • 2 GB DDR3 SDRAM with ECC
  • Up to 256 Mbyte NOR Flash and 128 KB of NVRAM
  • One PCI-X PMC expansion site
  • Rear IO
    • 1x Gigabit Ethernet
    • 4x COM ports
    • Up to 35x PMC IO
    • 8x GPIO
  • Operating system support for VxWorks®
  • Single slot 3U CompactPCI form factor
  • Compliant to PCIMG® 2.0 R3.0
  • Optional NVMe SSD

Abaco - XVB603 Intel® Xeon® Based VME Single Board Computer
  • Single slot 6U VME Single Board Computer
  • Intel Xeon quad core processor
  • Two channels of soldered DDR4 SDRAM with ECC up to 16 GB
  • Up to 8 MB shared cache
  • Up to 256 GB M.2 SSD
  • On-board Expansion site
  • 1x XMC - x8 PCIe
  • 1x PMC - PCI-X up to 133 MHz
  • Comprehensive range of front and rear I/O features
  • BIOS backup Flash
  • Optional extended operating temperature range
  • Windows®, Linux® and VxWorks OS support (64-bit only)
  • Two Levels of Ruggedization
  • Optional expansion board EXP238

Abaco - DSP221 NXP QorIQ T2081 based Rugged 6U VXS Single Board Computer
  • 6U VXS single board computer
  • Power Architecture™ AMP (advanced multiprocessing) CPU
  • T2081 (eight e6500 virtual cores)
  • 8GB DDR3L with ECC (up to 8 GB)
  • 512 MB NOR Flash
  • 32 GB NAND Flash solid-state drive
  • 512 kB non-volatile nvSRAM
  • 2x independent PMC/XMC sites
  • 2x 10/100/1000BASE-T Ethernet
  • 2x RS232 ports
  • 4x single-ended GPIO (5V tolerant)
  • Baseboard Management Module (BMM)

Abaco - XVR19 Intel® Xeon® Based Rugged VME Single Board Computer
  • Single slot 6U VME Single Board Computer
  • Intel Xeon E3-1505M or E3-1505L Quad Core CPU (7th Generation Intel Core technology)
  • Two channels of soldered DDR4 SDRAM with ECC up to 32 GB
  • Up to 8 MB shared cache
  • Up to 64 GB BGA NAND SSD
  • On-board PMC/XMC Expansion sites
  • 1x XMC - x8 PCIe
  • 1x optional XMC x4 PCIe
  • 2x PMC (1x optional); PCI-X 100
  • Comprehensive range of front and rear I/O features
  • BIOS backup Flash
  • Optional extended operating temperature range
  • Windows®, Linux® and VxWorks OS support

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com