Abaco - FMC168 low pin count FMC, 8-channel 16-bit ADC - 250 Msps

Abaco - FMC168 low pin count FMC, 8-channel 16-bit ADC - 250 Msps
  • Eight channel 16-bit 250MSPS A/D conversion
  • Available as air cooled and conduction cooled
  • VITA 57.1-2010 compliant
  • Based on TI ADS42LB69
  • Coaxial front panel inputs on SSMC connectors
  • Single ended AC- or DC-coupled analog input
  • Flexible clock tree enables:
    • internal clock
    • internal clock locked to an external reference
    • external clock
    • external sync / 1PPS
  • LPC (low-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant - Optional


The FMC168 is a digitizer FMC featuring eight ADC channels with 16-bit resolution and 250Msps sampling rate per channel.

With a flexible clock generation and distribution scheme, the FMC168 allows control of sampling frequency and analog input gain through serial communication with a carrier card.

The FMC168 design is based on the TI ADS42LB69 dual channel 16-bit 250Msps A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

More Product Information

Abaco - FMC216 high pin count FMC DAC, 16-channel 16-bit DAC – 312.5 Msps
  • 16 channel 16-bit 312.5Msps D/A conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on DAC39J84
  • 1.65V to 3.3V VADJ operation
  • Single ended DC coupled outputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (High-Pin Count) 400 pins connector
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies with SMA connectors
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC116 high pin count FMC ADC, 16-channel 14-bit ADC - 125 Msps
  • 16 channel 14-bit 125 Msps A/D conversion
  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • Based on LTC2175-14
  • 1.5V to 3.3V VADJ operation
  • Single ended DC coupled inputs
  • Programmable DC offset correction
  • Flexible clock tree enables
    • External or Internal clock
    • External clock output
    • External or internal reference
  • HPC (high-pin count) compatible
  • Samtec QSE front panel connector mates with QTE series and EQCD and EQRF cable assemblies
  • Optional SSMC/MMCX clock and trigger IO on the back of the FMC (consult factory)
  • MIL-I-46058c conformal coating (optional)

Abaco - FMC126 high pin count FMC ADC, 4-channel 10-bit ADC - 5 Gsps
  • Quad - Dual - Single 10-Bit Channel Operation
    • 4-Channel 1.25 Gsps A/D conversion Mode
    • 2-Channel 2.50 Gsps A/D conversion Mode
    • 1-Channel 5.00 Gsps A/D conversion Mode
  • VITA 57.1-2010 compliant
  • 1.5V to 3.3V VADJ operation
  • Conduction Cooled
  • 1.25Gsps DDR LVDS outputs
  • Coax front panel inputs on SSMC connectors
  • Single ended AC-coupled analog inputs
  • Flexible clock tree enables
    • internal clock
    • external clock
  • cascading multiple boards (optional)
  • HPC (high-pin count) compatible
  • Mil-I-46058c Conformal Coating Compliant (optional)

Abaco - FMC165 FPGA Mezzanine Card, Dual Channel ADC and Single Channel DAC
  • ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate)
  • AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS data rate)
  • RF input bandwidth up to 3.2 GHz and output up to 2.6 GHz in x2 interpolation mode
  • JESD204B (A/D), LVDS (D/A) FPGA data buses
  • Single-ended AC-coupled analog signals
  • 6 SSMB connectors available from the front panel
  • Clock source, sampling frequency and calibration through I2C communication
  • buses
  • Flexible clock tree enables
    • on board VCO - 1.5 to 2.6 GHz
    • external reference clock
    • external sampling clock
  • Multi-board synchronization capable
  • ANSI/VITA 57.1 compliant
  • HPC (high pin count) compatible
  • Conduction-cooled configuration available on Abaco FPGA carrier cards

Abaco - ICS-1572A 2-Channel, 250 MHz 16-bit ADC, 2-Channel 500 MHz 16-bit DAC XMC Module
  • 2 Transformer-coupled Analog Inputs, 16 bits, Fs ≤250 MHz per channel
  • 2 Transformer-coupled Analog Outputs, 16 bits, Fs ≤500 MHz per channel
  • Xilinx Virtex-6 LX240T User Programmable FPGA standard, other devices available as an option
  • PCI-e x8 Master/Target Burst Mode DMA capable
  • VxWorks, Linux and Microsoft® Windows® software drivers

Abaco - ICS-8580 2-Channel High-Definition or 4-Channel Standard Definition H.264 Video encoder/decoder
  • Real-time multi-channel encoding and decoding for transmission of video over IP data link
  • ITU-T H.264 AVC Codec (MPEG4 Part 10) Main Profile with configurable codec parameters
  • MPEG2 TS multiplexing with audio and metadata encapsulation
  • Data rates from 512kbps to 20Mbps <60ms Latency
  • 1 to 2 channels of HD encoded video up to 1600 X 1200@30fps
  • 1 to 4 channels of Standard Definition video
  • Input sources supported: HD/SD SDI (SMPTE259M/292M), NTSC/ PAL, HDTV (1080p/720p), CVBS, S-Video, Component
  • Support for Base Cameralink input devices
  • Stereo Audio I/O with synchronization to video
  • Metadata Ingest through Ethernet and PCIe
  • Output video formats supported: HD/SD SDI, SDTV, HDTV, CVBS, S-Video, Component
  • PCIe Gen1 x4 Data link for Raw/ Compressed Video Transport, Metadata and H/W configuration
  • Configuration control through Ethernet/PCIe Webserver or programmable API
  • Support for direct record/playback from NAS data storage
  • Video compression SDK/API for fast integration into enterprise applications
  • Multiple OS support for API and device drivers

Abaco - XMC477RC Four Channel SFP Gigabit Ethernet Interface
  • Four channel Gigabit Ethernet Interface SFP Front Panel I/O
  • Four SFP cages
  • IPMI resource FRU hardware definition information stored in onboard EEPROM
  • 1000Base-SX, 1000Base-LX, 1000Base-T
  • RoHS compliant
  • Versions supporting wide operating range available

Abaco - SRS6000 Multi-Channel Synchronous Receiver
  • 32 synchronized analog input channels
    • Diasy chain up to eight systems for up to 256 synchronized channels.
  • 16-bit, 1GSPS ADCs with 1.5 GHz analog bandwidth
    • Synchronization algorithm is portable to other ADC and DAC FMCs. Contact Abaco for additional details.
  • Picosecond RMS jitter
  • +/- 50 ps skew across channels
  • Five PC821 FPGA boards with Kintex™ Ultrascale FPGAs.
    • Porting the synchronization algorithm to other FPGA boards is possible. Contact Abaco for additional information.
  • 8GB DDR4-2133 SDRAM SODIMM on each PC821 FPGA board.
  • Two Intel 2.2GHz Xeon E processors.
  • Bi-directional x8 FireFly fiber optic connection providing up to 224 Gbps (optional)
  • PCIe Gen3x8 interface to each PC821 FPGA carrier
  • VHDL source code for the reference firmware
  • C++ reference application with auto-calibration
  • Windows® and Linux® support

Abaco - FMC120 Four Channel 16-Bit A/D up to 1.0 Gsps. Four Channel 16-Bit D/A up to 1.25 Gsps
  • 4-Channels 16-bit 1.00 Gsps A/D
    • 1.5 GHz Analog Bandwidth
    • Usable in the 3rd Nyquist Zone
  • 4-Channels 16-bit up to 1.25 Gsps D/A
    • 2.8 GSPS Update Rate
    • Onboard 48-Bit NCO for Flexible Signal Placement
  • VITA 57.1 HPC compliant
  • Conduction Cooled – Standard Option
  • DC coupled analog input.
  • Internal clock or external clock
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • HPC – High Pin Count Connector
  • 10 front panel SSMC or MMCX connectors
  • 2Kbit EEPROM (M24C02- WDW) accessible from the Host via I2C bus

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product



Europe, Africa, Middle East & Asia Pacific


Special Avionics I/O customer hotline


DSP Test System


Email: support@abaco.com