Abaco - FPGA DSP Board Support Package, Tools to get your FPGA design off the ground as quickly as possible

Abaco - FPGA DSP Board Support Package, Tools to get your FPGA design off the ground as quickly as possible
Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements. The package comes with three main components: host tools, FPGA tools and diagnostic tools.

More

Host tools

  • Open source C/C++ APIs
  • Comprehensive C/C++ example
  • Device register level calls
  • Support for Windows, Linux and VxWorks

FPGA tools

  • Open source top level VHDL reference design
  • Automated design constraints generation
  • Simplified design steps
  • IP cores for hardware interfaces, like PCIe and JESD204B, are included

Diagnostic tools

  • Windows GUI for board-level diagnostics
  • Board-level interface tests - memory, PCIe, FMC
  • Temperature monitoring
  • Analog data visualization with FMC analyzer

Download the datasheet to learn more.

More Product Information

Abaco - VP889 Virtex Ultrascale+ FPGA, Zynq Ultrascale+ and FMC+, 3U OpenVPX FPGA Card
  • Dual FPGA architecture
    • Virtex Ultrascale+
    • Zynq Ultrascale+ MPSoC
  • 8GB DDR4 mapped to FPGA
  • 2GB DDR4 mapped to Zynq
  • VITA 57.4 HSPC FMC+ site interfacing with the Ultrascale FPGA
  • Conduction cooled configuration available
  • VITA 66.4 optical interface via FireFly BLAST site
  • Up to two COM ports from the Zynq to the backplane
  • 1 GB Ethernet PHY to backplane
  • Front panel USB UART
  • SATA 3.0, DisplayPort to backplane RTM
  • VPX backplane GPIO
  • I2C interface P0 to Zynq
  • Operating system support
    • Linux®
    • Windows®
    • VxWorks®
  • Full-featured Board Support Package (BSP)
    • Open VHDL reference design
    • Open C/C++
    • PCIe™ core included with BSP
    • Peta Linux® reference design

Abaco - VP869 FPGA Card, Dual UltraScale+ 6U OpenVPX Board, Dual FMC+ sites, onboard Zynq Processor
  • Dual Xilinx Ultrascale+ FPGAs
  • Virtex Ultrascale+:
    • XCVU5P, XCVU9P
  • Over 100 Gb/s inter FPGA communication bandwidth
  • Dual FMC+ sites (Vita 57.4)
  • Support for Abaco FMC modules
  • Support for VITA compliant 3rd party FMC modules
  • Embedded Zynq Processor with 1GB DDR3 Memory
  • 2x GigaBit Ethernet (VITA 46.6 support)
  • 18 GB onboard DDR3 SDRAM memory w/ ECC
  • VITA 65 OpenVPX compliant
  • Expandable storage with SSD daughter card
  • High performance Abaco PCIe IP Engine

Abaco - SDR430 RFSoC FPGA System

Electronic Warfare Development Platform enables rapid development and deployment of counter attacks at significantly reduced time and cost.

Abaco - VP880 / VP881 3U OpenVPX FPGA Card
  • Dual FPGA architecture
    • Kintex or Virtex Ultrascale
    • Zynq Ultrascale+ MPSoC
  • 8GB DDR4 mapped to FPGA
  • 2GB DDR4 mapped to Zynq
  • VITA 57.4 HSPC FMC+ site interfacing with the Ultrascale FPGA
  • Conduction Cooled Configuration Available
  • VITA 66.4 optical interface via FireFly BLAST site
  • Up to two COM ports from the Zynq to the backplane
  • 1 GB Ethernet PHY to Backplane
  • Front Panel USB UART
  • SATA 3.0, Display Port to Backplane RTM
  • VPX Back plane GPIO
  • I2C Interface P0 to Zynq
  • Operating system support
    • Linux®
    • Windows®
    • VxWorks®
  • Full-featured Board Support Package (BSP)
    • Open VHDL reference design
    • Open C/C++
    • PCIe™ core included with BSP
    • Peta Linux® reference design

Abaco - PCIe490 8-slot PCI Express Gen 2 FPGA I/O Expansion Chassis
  • 8-Slot PCI Express Gen 2
  • PCIe x16 Host Datalink
  • 750W ATX Power Supply
  • x4 PCIe Lanes Per Slot
  • Rack Mount Ready
  • Isolated Temperature Environment
  • Chassis Daisy Chain Enabled

Abaco - FMC407 FPGA Mezzanine Card, Clock and Trigger Distribution FMC
  • External clock input and onboard VCO
  • External reference input and onboard reference (30.72MHz)
  • Eight synchronized clock outputs
    • 34.375MHz-4.4GHz
  • Eight synchronized trigger or 1PPS outputs
  • Onboard GPS receiver for accurate data time stamping
  • Fully controllable from FMC connector
  • VITA 57.1 compliant
  • LPC (low-pin count) compatible
  • Conformal Coating (optional)
  • Conduction cooled (optional)
  • A breakout cable on the front panel makes all clock and trigger signals available on individual SMA sockets.

Abaco - FMC172 FPGA Mezzanine Card, Wideband Low Latency FMC Module
  • Single-channel, 10-bit A/D up to 6.4GSPS
  • Single-channel, 10-bit D/A up to 6.0GSPS
  • VITA 57.1 FMC compliant
  • Conduction-cooled version available (Deviation from Standard)
  • AC-coupled analog signals
  • 5 SSMC front panel connectors
  • Sampling frequency and calibration through I2C communication
  • Flexible clock tree enables:
    • Internal clock source
    • External reference clock
  • Trigger signal to enable multiboard synchronization
  • Power-down modes to switch off unused functions for system power savings
  • MIL-I-46058c Conformal Coating compliant (optional)

Abaco - VP680 FPGA Card, Virtex™ 6 3U VPX VITA 46 Compliant FMC carrier
  • Virtex-6 LX130T, LX240T, LX365T, SX315T, SX315T, SX475T
  • High density Memory Options using BLAST sites: DDR2 and DDR3 SDRAM, QDR2 SRAM, NAND FLASH.
  • VPX VITA 46 Compliant
  • Front Panel FPGA Mezzanine Card (FMC)
  • UART over USB
  • Gen 1 and Gen 2 PCI express
  • VITA 48.2 compliant (1 inch Pitch)

Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module
  • Two operational modes
    • 4 channels, 12-bit, 3.2GSPS data rate
    • 2 channels, 12-bit, 6.4GSPS data rate
  • VITA 57.4 HSPC FMC+ site required
  • 16 JESD204B lanes at 12.8GBPS
  • 8 JESD204B lanes passed to board topside for FMC stacking
  • Optional FMC+e connection for additional stacked serial lanes
  • Conduction cooled configuration available
  • AC-coupled analog input
  • 9 front panel MMCX connectors
  • Internal or external clock
  • MIL-I-46058c conformal coating (optional)
  • 2Kbit EEPROM (M24C02-WDW) accessible from the host via I2C bus
  • Full-featured board support package.
    • Open source VHDL reference design
    • Open source C/C++ reference examples. Windows® and Linux® support.
    • JESD204B core included
    • Simplified IP integration with StellarIP

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com