Abaco - GR2 3U VPX High Performance Dual Channel Graphics Output Board
-
HPC graphics output board
-
3U VPX form factor, 1” pitch
-
NVIDIA Pascal GPU: Quadro P5000 MXM
-
6.4 TFLOPS peak FP32 performance
-
2,048 CUDA cores, 16GB GDDR5 or Quadro P3000 MXM
-
3.9 TFLOPs peak FP32 performance
-
1,280 CUDA cores, 6GB GDDR5
-
2x DisplayPort 1.4 outputs - 4K @ 60Hz
-
PCI Gen 3 - x16, x8, x4 lanes
-
Windows and Linux drivers on x86
-
NVIDIA CUDA 6.1, OpenCL™ 1.2 and NVIDIA software suite
-
Air-cooled and conduction cooled
More Product Information
-
NVIDIA Quadro RTX™ 5000 / RTX™ 3000 GPU
-
Up to 9.49 TFLOPS peak performance
-
Up to 3072 CUDA cores
-
Up to 16 GB GDDR5 Graphics Memory
-
Up to 256-bit Memory Width
-
-
Configuration 1:
-
2x DisplayPorts 1.4a outputs
-
2x SL-DVI outputs
-
-
Configuration 2:
-
4x SL-DVI outputs
-
-
Configuration 3:
-
4x DisplayPort 1.4a outputs
-
CUDA Toolkit 10, CUDA Compute Capability 7.5
-
OpenGL 4.6, OpenGL ES 3.2, Open CL 1.2, DirectX 12
-
H.265 (HEVC) / H.264 Hardware Encode/Decode
-
Windows and Linux drivers on x86
-
AXIS ImageFlex
-
3U VPX form factor
-
Air cooled, conduction cooled
-
HPC video capture board
-
3U VPX form factor, 1” Pitch
-
NVIDIA Pascal ™ class GPU: Quadro P5000 MXM
-
6.4 TFLOPs peak FP32 performance
-
2,048 CUDA cores, 16GB GDDR5 Quadro P3000 MXM
-
3.9 TFLOPs peak FP32 performance
-
1,280 CUDA cores, 6GB GDDR5
-
-
4x 3G-SDI inputs and 4x 3G-SDI outputs - SMPTE 424M - 1080p@60Hz
-
1x DisplayPort output - 1.1a/1.2 - 4K @60Hz
-
PCI Gen 3 - x8 or x4 lanes
-
Windows and Linux drivers on x86
-
NVIDIA CUDA 6.1, OpenCL™ 1.2 and NVIDIA software suite
-
Conduction-cooled
-
NVIDIA® Jetson AGX Xavier™ SoM
-
Up to 11 TFLOPS (FP16)
-
Up to 32 TOPS HP (int8)
-
-
2x DisplayPort 1.4 outputs or 2x SL-DVI outputs
-
2x SFP+ (fiber) 10 Gigabit Ethernet ports
-
2x 1 Gigabit Ethernet ports
-
2x USB 3.0 ports
-
4x USB 2.0 ports
-
2x CANbus ports
-
3x UARTs
-
Audio I/O
-
GPIO
-
256 GB NVMe SSD
-
NVIDIA JetPack™ SDK
-
Abaco AXIS ImageFlex
-
Abaco AXIS EventView
-
Low SWaP
-
-40C to +71C (base-plate cooled)
-
HPC graphics output board
-
XMC form factor
-
NVIDIA Pascal Class GPU
-
Quadro P2000 (chip-down)
-
2.3 TFLOPs peak FP32 performance
-
768 CUDA cores
-
4GB GDDR5
-
-
3x DisplayPort 1.4 outputs – 4K @ 60Hz
-
PCI Gen 3 – x8, x4 lanes
-
Windows and Linux drivers on x86
-
NVIDIA CUDA 10, OpenCL 1.2 and NVIDIA software suite
-
Air-cooled and conductioncooled
-
Dual Xilinx UltraScale FPGAs
-
Kintex Ultrascale:
-
XCKU095, XCKU115,
-
-
Virtex Ultrascale:
-
XCVU080, XCVU095, XCVU125, XCVU160, XCVU190
-
-
Over 100 Gb/s Inter FPGA Communication Bandwidth
-
Two FMC+ Sites (Vita 57.4)
-
Support for Abaco FMC Modules
-
Support for all Vita Compliant 3rd Party FMC Modules
-
Embedded Zynq Processor with 1GB DDR3 Memory
-
2x GigaBit Ethernet, dual mode, 1000-T or 1000-BX.
-
18 GB Onboard DDR3 SDRAM Memory w/ ECC
-
VITA 65 OpenVPX Compliant
-
Expandable Storage with SSD Daughter Card
-
High Performance Abaco Systems PCIe IP Engine
-
Supported VPX Profile MOD6- PAY-4F1Q2U2T-12.2.1-4
-
HPC graphics output and video capture board
-
XMC form factor
-
NVIDIA Pascal Class GPU
-
Quadro P2000 (chip-down)
-
2.3 TFLOPs peak FP32 performance
-
768 CUDA cores
-
4GB GDDR5
-
-
2x DisplayPort 1.4 outputs – 4K @ 60Hz
-
2x 3G-SDI outputs (1080p60)
-
VGA output
-
4x 3G-SDI inputs (1080p60)
-
PCI Gen 3 – x8, x4 lanes
-
Windows and Linux drivers on x86
-
NVIDIA CUDA 10, OpenCL 1.2 and NVIDIA software suite
-
Air-cooled, conduction-cooled
-
Dual Xilinx Ultrascale+ FPGAs
-
Virtex Ultrascale+:
-
XCVU5P, XCVU9P
-
-
Over 100 Gb/s inter FPGA communication bandwidth
-
Dual FMC+ sites (Vita 57.4)
-
Support for Abaco FMC modules
-
Support for VITA compliant 3rd party FMC modules
-
Embedded Zynq Processor with 1GB DDR3 Memory
-
2x GigaBit Ethernet (VITA 46.6 support)
-
18 GB onboard DDR3 SDRAM memory w/ ECC
-
VITA 65 OpenVPX compliant
-
Expandable storage with SSD daughter card
-
High performance Abaco PCIe IP Engine
-
Save space with up to 24 SSDs in a 2U rackmount enclosure
-
Simplify overall product portfolio with this unique storage building block
-
Safeguard data with intelligent fault diagnosis, resolution capabilities, persistent error logging, and monitoring
-
Deliver data fast using Seagate SSDs
-
Ensure data is available with N+1 PCMs, I/O modules, and dual data paths to all drives
-
Maximum of 28.8GB/s in a dual controller configuration
-
ADC32RF44 ADC: dual-channel 14-bit up to 2.6 GSPS with DDC (or 14-bit @ 2.5 GSPS with full data rate)
-
AD9129 DAC: single-channel 14-bit up to 5.2 GSPS (2.6 GSPS data rate)
-
RF input bandwidth up to 3.2 GHz and output up to 2.6 GHz in x2 interpolation mode
-
JESD204B (A/D), LVDS (D/A) FPGA data buses
-
Single-ended AC-coupled analog signals
-
6 SSMB connectors available from the front panel
-
Clock source, sampling frequency and calibration through I2C communication
-
buses
-
Flexible clock tree enables
-
on board VCO - 1.5 to 2.6 GHz
-
external reference clock
-
external sampling clock
-
-
Multi-board synchronization capable
-
ANSI/VITA 57.1 compliant
-
HPC (high pin count) compatible
-
Conduction-cooled configuration available on Abaco FPGA carrier cards
Abaco Systems
Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.
We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.
| I need help with my Abaco product | |
|
Americas +1-800-322-3616 |
Europe, Africa, Middle East & Asia Pacific +44-1327-322760 |
|
Special Avionics I/O customer hotline +1-805-883-6097 |
DSP Test System |
| Email: support@abaco.com | |
Line Cards:
