Abaco - SBC3511 Rugged 3U VPX Single Board Computer with Intel Xeon E Processor (9th Generation Intel Core i7 Technology) and aligned to SOSATM standard

Abaco - SBC3511 Rugged 3U VPX Single Board Computer with Intel Xeon E Processor (9th Generation Intel Core i7 Technology) and aligned to SOSATM standard
  • Single slot 3U VPX Single Board Computer
  • Xeon E CPU
  • Two channels of soldered DDR4 SDRAM with ECC up to 32 GB
  • Up to 256 GB NAND Flash (NVMe SSD)
  • 40G Ethernet data plane
  • x4 PCIe expansion plane
  • 10G Ethernet control plane
  • IPMI management plane
  • One XMC site
  • Rear I/O:
    • 1x 1000BASE-T
    • 1x SATA port
    • Up to 3x COM ports
    • 1x DisplayPort
    • 1x USB 2.0 port
    • 1x USB 3.2 Gen 1 port
    • 4x GPIO
  • Convection- and conduction cooled variants
  • AXIS and Deployed Test Software
  • Windows, Linux and VxWorks operating system support

More

High performance and alignment with SOSA, CMOSS

The SBC3511 is based on the new, highly integrated Intel® Xeon® E-2276ME 6-core/12-thread processor ('Coffee Lake Refresh') which operates at 2.8 GHz with TurboBoost up to 4.5 GHz, 64 GB of DDR4 RAM and the inclusion of up to 256 GB of NVMe SSD, providing increased platform performance and throughput. It features a 40 Gigabit Ethernet data plane, delivering not only a high speed interconnect but also compatibility with an OpenVPX payload profile, to which SOSA, CMOSS and HOST are all aligned. In addition, the SBC3511’s IPMI subsystem has been upgraded to allow operation from 3.3V AUX power only, further enhancing its alignment with the SOSA standard.

Designed for optimum security

The SBC3511 incorporates a range of security features that include an inherently secure FPGA solution (Xilinx® Zynq® UltraScale+™), and support for Intel’s Trusted Execution Technology. The FPGA can be utilized to instantiate a range of Abaco defined security features. Customers who wish to embed their own application specific features, can also be supported. Contact factory for details.

Innovative thermal management

The SBC3511 features a unique thermal management design which allows deterministic high performance even at the extended temperatures typical of deployment on space-constrained platforms in combat zones. This is in contrast to less efficient thermal management designs that see a processor’s performance throttled back at high temperatures.

Powerful hardware made stronger by game-changing software

Knowing your weak points is the foundation of strength, because you can’t correct what you don’t measure. The SBC3511 can also be supported with one or more elements of the Abaco software suite, including PBIT for early monitoring and reporting; CIBIT for non-intrusive ongoing and on-demand monitoring and reporting; and Health Toolkit, which acts as a system monitor to collect and report the health of all elements in the system, thanks to the VITA46.11 tier 1 and tier 2 interface over IPMI. All are fully compatible with the most widely-used operating systems and applications for industrial and defense deployments.

More Product Information

Abaco - SBC329 Rugged 3U VPX Single Board Computer with Intel® Xeon® Processor (7th Generation Intel Core™ Technology)
  • Single slot 3U VPX Single Board Computer
  • Intel Xeon E3-1505M or E3-1505L v6 quad core CPU (7th Generation Intel Core technology)
  • Up to 16 GB DDR4 SDRAM with ECC
  • 32 GB NAND Flash
  • 512 kB NVRAM
  • FPGA with advanced security features
  • TPM (Trusted Platform Module)
  • 8 PCIe lanes (Gen 3 capable) switch
  • Rear IO:
    • Up to 3x Gigabit Ethernet ports
    • Up to 2x DVI / HDMI ports
    • Up to 3x SATA ports
    • Up to 2x COM ports
    • Up to 3x USB ports
    • Up to 4x GPIO lines
  • Five levels of ruggedization (convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Windows®, Linux® and VxWorks® OS support

Abaco - SBC328 Rugged 3U VPX Single Board Computer with Intel® Xeon® Processor (6th Generation Intel Core™ Technology)
  • Single slot 3U VPX Single Board Computer
  • Intel Xeon E3-1505M or E3-1505L Quad Core CPU (6th Generation Intel Core technology)
  • Up to 16 GB DDR4 SDRAM with ECC
  • 32 GB NAND Flash
  • 512kB NVRAM
  • FPGA with advanced security features
  • TPM (Trusted Platform Module)
  • 8x PCIe lanes from Gen-3 capable switch
  • Rear IO:
    • Up to 3x Gigabit Ethernet ports
    • Up to 2x DVI / HDMI ports
    • Up to 3x SATA ports
    • Up to 2x COM ports
    • Up to 3x USB ports
    • Up to 4x GPIO lines
  • Five levels of ruggedization (convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks OS support

Abaco - SBC6511 Rugged 6U VPX Single Board Computer with 9th Gen Intel Xeon E CPU and Aligned to SOSA Standard
  • Xilinx Zynq Ultrascale+
  • 6U OpenVPX single board computer
  • 9th Generation Intel® Core™ i7
  • 12 MB shared cache
  • Soldered DDR4 SDRAM with ECC
  • Up to 256 GB solid state disk drive
  • Multiple Data Plane Fabric Configurations (10/40GE)
  • Multiple PCIe® Expansion Plane Fabric configurations
  • Both rear & front I/O ports
  • On-board expansion sites
  • Trusted Platform Monitor (TPM)
  • Elapsed Time Indicator (ETI)
  • Rich software choice, including Deployed Test Software, plus operating systems support for Microsoft® Windows, Open Linux® and VxWorks®
  • Middleware software support of AXIS Pro Suite and Health Toolkit

Abaco - SBC326 4th Generation Intel® Core™ i7 Based Rugged 3U VPX Single Board Computer
  • Single slot 3U VPX Single Board Computer
  • 4th Generation Intel Core i7 quad core processor (6 MB shared cache)
  • Two channels of soldered DDR3 SDRAM with ECC up to 16 GB
  • Up to 32 GB NAND Flash
  • Rear IO:
    • 8x PCIe lanes from Gen-3 capable switch
    • Up to 3 Gigabit Ethernet Ports (either one 1000BaseT plus two 1000BaseBX or two 1000BaseT)
    • 1x DVI / HDMI as standard
    • 1x SATA 6 Gb/s port as standard (plus additional two SATA 6 Gb/s ports on some variants)
    • 2x COM ports
    • 2x USB 2.0 ports (plus an additional USB 3.0 port on some variants)
    • Audio (available on some variants)
    • Up to 6x GPIO
  • Five Levels of Ruggedization (Convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks® OS support

Abaco - SBC346 4th Generation Intel® Core™ i7-based Rugged 3U VPX Single Board Computer
  • Single slot 3U VPX single board computer
  • 4th Generation Intel® Core™ i7 quad core processor (6 MB shared cache)
  • Two channels of soldered DDR3L SDRAM with ECC up to 16 GB
  • Up to 32 GB NAND Flash
  • Rear I/O
    • Up to 3x Gigabit Ethernet ports (either one 1000BASE-T plus two 1000BASE-BX or two 1000BASE-T)
    • 1x VGA port
    • 2x SATA 6 Gb/s ports
    • 2x COM ports
    • Up to 4x USB 2.0 ports
    • Audio (available on some variants)
    • Up to 8x GPIO
  • Five levels of ruggedization (convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks® support

Abaco - XVR16 4th Generation Intel® Core™ i7 Based Rugged VME Single Board Computer
  • Single slot 6U VME Single Board Computer
  • 4th Generation Intel Core i7 quad core processor
  • Two channels of soldered DDR3 SDRAM with ECC up to 16 GB
  • Up to 6 MB shared cache
  • Up to 64 GB NAND Flash
  • On-board Expansion sites
    • 2x XMC - x8 PCIe Gen 3 capable
    • 2x PMC - PCI-X 133 MHz
  • Front I/O:
    • 2x Gigabit Ethernet ports (second port is optionally available)
    • 1x DisplayPort
    • 2x USB ports (USB 3.0 optional)
    • 1x COM port
    • 1x Power button
    • 1 x eSATA (optional)
  • Rear IO: 2x Gigabit Ethernet ports (VITA 31.1)
    • 2x VGA
    • 2x DVI
    • 2x SATA Gen3 ports, RAID capable
    • 2x COM ports
    • 2x USB 2.0 ports
    • 1x Audio
    • 12x GPIO
    • 2x PMC rear I/O
    • 2x XMC rear I/O
  • BIOS backup Flash
  • Optional on-board SATA HDD
  • Optional conduction cooling
  • Optional extended operating temperature range
  • AXIS and Deployed Test Software
  • Microsoft® Windows®, Linux® and VxWorks® OS support
  • Five Levels of Ruggedization

Abaco - SBC627 6U OpenVPX 5th Generation Intel® Core™ i7-based Single Board Computer
  • SmartFusion2
  • 6U OpenVPX single board computer
  • 5th Generation Intel® Core™ i7
  • Soldered DDR3 SDRAM with ECC
  • Up to 64 GB solid state disk drive
  • Up to 6 MB shared cache
  • Multiple Data Plane Fabric Configurations (10/40GE)
  • Multiple PCIe® Expansion Plane Fabric configurations
  • Both rear & front I/O ports
  • On-board expansion sites
  • Trusted Platform Monitor (TPM)
  • Elapsed Time Indicator (ETI)
  • Rich software choice, including Deployed Test Software, plus operating systems support for Microsoft® Windows / Open Linux® and real-time operating system support

Abaco - XVR19 Intel® Xeon® Based Rugged VME Single Board Computer
  • Single slot 6U VME Single Board Computer
  • Intel Xeon E3-1505M or E3-1505L Quad Core CPU (7th Generation Intel Core technology)
  • Two channels of soldered DDR4 SDRAM with ECC up to 32 GB
  • Up to 8 MB shared cache
  • Up to 64 GB BGA NAND SSD
  • On-board PMC/XMC Expansion sites
  • 1x XMC - x8 PCIe
  • 1x optional XMC x4 PCIe
  • 2x PMC (1x optional); PCI-X 100
  • Comprehensive range of front and rear I/O features
  • BIOS backup Flash
  • Optional extended operating temperature range
  • Windows®, Linux® and VxWorks OS support

Abaco - SBC347D Intel® Xeon® D based Rugged 3U VPX Single Board Computer
  • Single slot 3U VPX Single Board Computer
  • Xeon D high density, low power SoC Processor
  • Two channels of soldered 32 GB DDR4 SDRAM with ECC
  • Up to 32 GB NAND Flash
  • Up to 20 PCIe lanes (Gen 3 capable) for Data and Expansion planes
  • Rear IO:
    • Up to 3x Gigabit Ethernet ports (either one 1000BASE-T plus two 1000BASE-BX or two 1000BASE-T)
    • 2x 10G Ethernet ports
    • 2x SATA 6 Gb/s ports
    • 2x COM ports
    • 4x USB 2.0 ports
    • Up to 8x GPIO
  • Five levels of ruggedization (convection and conduction cooling variants)
  • AXIS and Deployed Test Software
  • Windows®, Linux® and VxWorks® OS support X

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com