Abaco - SPR507B 4-Channel Serial FPDP Interface PMC/XMC Module with PCI Express x4 Gen 2 Interface

Abaco - SPR507B 4-Channel Serial FPDP Interface PMC/XMC Module with PCI Express x4 Gen 2 InterfaceAbaco - SPR507B 4-Channel Serial FPDP Interface PMC/XMC Module with PCI Express x4 Gen 2 Interface
  • Four sFPDP ports
  • Supports up to 4.25Gb/s per port
  • Each port can operate independently (direction) with a unique DMA engine per port
  • Four lane PCI Express Gen2 interface allows for high-speed data transfer to Host memory
  • Available with either PMC or XMC interface to allow for wide range of host compatibility
  • Available in five ruggedization levels with support for harsh environments and conduction cooling
  • Supports copy mode (duplicates data from one fibre to another while optionally transferring data to Host)
  • VITA 17.1 compliant, upgrade path to VITA 17.2
  • 1 GB onboard storage
  • VxWorks, Microsoft® Windows® and Linux® Software Development Kits

More

Remote data transfer at the industry’s highest speed

  • PMC or XMC options allow flexibility in choice of host
  • High performance throughput up to 1.4 Gigabytes/second
  • Noise-immune fiber link up to 10kms
  • Allows for optical channels to be bonded

Designed for applications where the sensor is geographically remote from the backend processor, the SPR507B combines high performance technologies with flexible integration options to deliver remote data at high speeds with accuracy and reliability.

Low latency throughput via sFPDP

Abaco Systems was among the first companies to embrace the speed, low latency, reliability and flexibility of the sFPDP (serial front panel data port) communications protocol, and the SPR507B provides support for four sFPDP ports for optimum throughput.

Optimum performance, maximum flexibility

The SPR507B features the Xilinx® Virtex®-6 FPGA to help it deliver up to 4.25 Gbaud per link, while minimizing power consumption and heat dissipation compared with earlier generations of FPGA – providing not only leading edge performance but also flexibility in deployment.

More Product Information

Abaco - PCIE-5565RC Interface Card, PCI Express (PCIe) Reflective Memory (RFM) Node Interface Card
  • Error management and detection protects against data loss
  • Up to 170 MB/s sustained data rate
  • Deterministic transfer rate with only 450-500 nanoseconds of latency between nodes
  • Supports dynamic packet sizes ranging from 4 to 64 bytes
  • 2.12 Gbaud serial connection speed
  • Supports interrupt transfers
  • 128 or 256MB SDRAM
  • RoHS compliant

Abaco - XMC477RC Four Channel SFP Gigabit Ethernet Interface
  • Four channel Gigabit Ethernet Interface SFP Front Panel I/O
  • Four SFP cages
  • IPMI resource FRU hardware definition information stored in onboard EEPROM
  • 1000Base-SX, 1000Base-LX, 1000Base-T
  • RoHS compliant
  • Versions supporting wide operating range available

Abaco - NIC10GBT Network Interface Card, Dual/Four Channel 10/100/1000 Mbit/s Ethernet
  • Software support for Intel™ I210IT at www.intel.com
  • For operating systems not supported by Intel™, please contact Abaco Systems

Abaco - NIC10GFT Network Interface Card, Dual 10GBASE-T XMC with Front I/O
  • Two 10GBASE-T ports
  • Front I/O
  • XMC form factor
  • Intel X540 dual 10GbE controller
  • x8 PCI Express (Base Specification 2.1) compliant to ANSI/VITA 42.3
  • Supports jumbo frames up to 15.5 KB
  • Integrated IPsec and MACsec security engines
  • Auto-negotiate between 100Mbits, 1Gbps and 10Gbps speeds
  • 128 transmit and receive queues (per port)
  • 64-bit address support
  • Full duplex operation
  • 16 Mbit serial Flash memory
  • TCP/UDP/IP checksum offload, TCP segmentation offload
  • 802.1Q VLAN support
  • IPMI resource: FRU hardware definition stored in onboard EEPROM
  • IEEE 1588 precision time protocol support
  • Supports VxWorks, Windows and Linux
  • RoHS compliant
Key Specifications
  • VITA 42.0 (XMC)
  • IEEE 1386 (CMC)
  • IEEE 1386.1 (PMC)

Abaco - PMC-GBIT-DT2BP Network Interface Card, PMC with Dual 1000BaseT/100BaseTX/10BaseT Rear Panel Gigabit Ethernet Interfaces
  • Dual 10BaseT / 100BaseTX / 1000BaseT network interface card with rear panel access
  • Single-wide 32/64-bit 33/66 MHz PCI, 66/133MHz PCI-X PMC
  • Auto-negotiating protocol selection
  • Transmit and receive FIFOs
  • Drivers for VxWorks®, Linux®, Windows® NT and Windows 2000 available
  • Supports Jumbo frames
  • Rear panel access provided by the PIMGBIT- DT module; module has two RJ-45 connectors and LED indicators for link, speed and activity X

Abaco - ICS-1572A 2-Channel, 250 MHz 16-bit ADC, 2-Channel 500 MHz 16-bit DAC XMC Module
  • 2 Transformer-coupled Analog Inputs, 16 bits, Fs ≤250 MHz per channel
  • 2 Transformer-coupled Analog Outputs, 16 bits, Fs ≤500 MHz per channel
  • Xilinx Virtex-6 LX240T User Programmable FPGA standard, other devices available as an option
  • PCI-e x8 Master/Target Burst Mode DMA capable
  • VxWorks, Linux and Microsoft® Windows® software drivers

Abaco - PMC522/FP Eight Port Serial Controller I/O for VME and CompactPCI
  • PMC form factor
  • Eight port RS-232/RS-422 serial controller
  • PCI bus 2.3 target interface compliant up to 33 MHz clock, 32-bit bus
  • Eight RS-232/RS-422 ports are accessible via front 68 pin high-density connector or on rear I/O via P14
  • Automatic RTS/CTS or DTR/ DSR flow control
  • Automatic Xon/Xoff software flow control
  • Conformal coating optional (Humiseal 1B31 or 1B73)

Abaco - PMC522 Four Port Serial Controller I/O for VME and CompactPCI
  • PMC form factor
  • Four port RS-232 serial controller
  • PCI bus 2.3 target interface compliant up to 33 MHz clock, 32-bit bus
  • Four high performance 16C550 UARTs with 64 bytes of TX/RX FIFO per channel
  • Four RS-232 ports are accessible on front via RJ45 connectors or rear I/O via P14
  • Automatic RTS/CTS or DTR/ DSR flow control
  • Automatic Xon/Xoff software flow control
  • Conformal coating optional (Humiseal 1B31 or 1B73)

AVT - Mako G-508B POL Polarization camera with GigE interface
  • GigE Vision interface with Power over Ethernet
  • Screw mount RJ45 Ethernet connector for secure operation in industrial environments
  • IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
  • Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
  • Supports cable lengths up to 100 meters (CAT-6 recommended)
  • Comprehensive I/O functionality for simplified system integration
  • Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
  • Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
  • Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com