Abaco - SPR870A 3U VPX Wideband Digital Receiver/Exciter Module

More Product Information

Abaco - Wideband Digital Down Converter
A Digital Down Converter performs channel access functions in digital receivers. It is used for extracting a channel (frequency band) of interest in a wideband signal. Abaco Systems' wideband DDC core employs a quad DDC architecture to achieve ultra high performances. The core accepts up to 16-bit complex data and can process 1GSPS continuously. With a fully programmable architecture at all stages of the processing, this core combines flexibility and speed and can be used in combination with our dual-channel 1GSPS ADC module.

Abaco - FMC172 FPGA Mezzanine Card, Wideband Low Latency FMC Module
  • Single-channel, 10-bit A/D up to 6.4GSPS
  • Single-channel, 10-bit D/A up to 6.0GSPS
  • VITA 57.1 FMC compliant
  • Conduction-cooled version available (Deviation from Standard)
  • AC-coupled analog signals
  • 5 SSMC front panel connectors
  • Sampling frequency and calibration through I2C communication
  • Flexible clock tree enables:
    • Internal clock source
    • External reference clock
  • Trigger signal to enable multiboard synchronization
  • Power-down modes to switch off unused functions for system power savings
  • MIL-I-46058c Conformal Coating compliant (optional)

Abaco - FMC134 FPGA Mezzanine Card, Direct RF conversion module
  • Two operational modes
    • 4 channels, 12-bit, 3.2GSPS data rate
    • 2 channels, 12-bit, 6.4GSPS data rate
  • VITA 57.4 HSPC FMC+ site required
  • 16 JESD204B lanes at 12.8GBPS
  • 8 JESD204B lanes passed to board topside for FMC stacking
  • Optional FMC+e connection for additional stacked serial lanes
  • Conduction cooled configuration available
  • AC-coupled analog input
  • 9 front panel MMCX connectors
  • Internal or external clock
  • MIL-I-46058c conformal coating (optional)
  • 2Kbit EEPROM (M24C02-WDW) accessible from the host via I2C bus
  • Full-featured board support package.
    • Open source VHDL reference design
    • Open source C/C++ reference examples. Windows® and Linux® support.
    • JESD204B core included
    • Simplified IP integration with StellarIP

Abaco - FMC424 FPGA Mezzanine Card, Stackable QSFP+ Module
  • Dual QSFP+
  • 10.3125 Gbps per transceiver, 82.5 Gbps total data rate
  • GBT FMC connector signaling
  • ANSI/VITA 57.1-2010 electrically compliant
  • 1.5V to 3.3V VADJ operation
  • High Pin Count (HPC) connector
  • MIL-I-46058c conformal coating (optional)

Abaco - SPR507B 4-Channel Serial FPDP Interface PMC/XMC Module with PCI Express x4 Gen 2 Interface
  • Four sFPDP ports
  • Supports up to 4.25Gb/s per port
  • Each port can operate independently (direction) with a unique DMA engine per port
  • Four lane PCI Express Gen2 interface allows for high-speed data transfer to Host memory
  • Available with either PMC or XMC interface to allow for wide range of host compatibility
  • Available in five ruggedization levels with support for harsh environments and conduction cooling
  • Supports copy mode (duplicates data from one fibre to another while optionally transferring data to Host)
  • VITA 17.1 compliant, upgrade path to VITA 17.2
  • 1 GB onboard storage
  • VxWorks, Microsoft® Windows® and Linux® Software Development Kits

Abaco - TRRM940 8-port transition module for 6U VME NETernity 24-port GbE PICMG 2.16
  • 8 10/100BaseTX ports with RJ45 connectors
  • Transition module for RM940 Ethernet switches
  • Ethernet/LAN Resource Center

Abaco - CP3-GESW8-TM8 3U CPCI rear-panel I/O transition module with 8 RJ-45 ports for NETernity™ CP3-GESW8 switches
  • Supports 8-port 10/100/1000BaseT Ethernet line speed
  • 3U CompactPCI form factor with rear-panel I/O
  • Rear-panel I/O support for NETernity™ CP3-GESW8 or CP3-GESW8N
  • IEEE 802.3 compliant
  • Ethernet/LAN Resource Center

Abaco - ICS-1572A 2-Channel, 250 MHz 16-bit ADC, 2-Channel 500 MHz 16-bit DAC XMC Module
  • 2 Transformer-coupled Analog Inputs, 16 bits, Fs ≤250 MHz per channel
  • 2 Transformer-coupled Analog Outputs, 16 bits, Fs ≤500 MHz per channel
  • Xilinx Virtex-6 LX240T User Programmable FPGA standard, other devices available as an option
  • PCI-e x8 Master/Target Burst Mode DMA capable
  • VxWorks, Linux and Microsoft® Windows® software drivers

VTI Instruments - EX1200-7500 64 -Channel, 2 MHz, Digital I/O
  • Eight ports of 8 I/O bits each
  • High current capability for control of external relays, 300 mA sink
  • Simulate and receive digital data at up to 2 MHz sample rates
  • Selectable output voltages range from 3.3 V to 60 V
  • Setup outputs and scan inputs as part of EX1200 measurement sequencing engine

Abaco Systems

Abaco's history goes back more than 30 years, to the days of Plessey Microsystems in the UK – one of the first adopters worldwide of the ‘new’ VME standard. A management buyout saw Plessey become Radstone, who acquired ICS and Octec. Meanwhile, equally prominent embedded computing companies including SBS, VMIC and Condor Engineering were being acquired by GE to bolster its offering in that area – and Radstone was acquired by GE Fanuc Embedded Systems in September 2006. GE Fanuc Embedded Systems subsequently became GE Intelligent Platforms and, in September 2015, the embedded computing part of the business was acquired by Veritas Capital. The resulting business was named Abaco Systems.

We’re 700+ people, with our global headquarters in Huntsville, Alabama; a European headquarters and manufacturing site in Towcester, England; and offices throughout the world.

Tweets by @abacosys

I need help with my Abaco product

Americas

+1-800-322-3616

Europe, Africa, Middle East & Asia Pacific

+44-1327-322760

Special Avionics I/O customer hotline

+1-805-883-6097

DSP Test System

PRIVATE SUPPORT FORUM | EMAIL

Email: support@abaco.com