-
For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
-
Standard cable lengths are 3, 5, 9 and 15 meters.
Advanced Illumination - Extension Cables
General Specs
Control Specs
Part No Key
More Product Information
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
-
Continues the Infinity family’s Industry leading electrical performance
-
High temperature capability (175° C +) for automotive device characterization and other applications
-
Better tip visibility for enhanced placement accuracy and repeatability
-
Improved tip life/durability with solid rhodium contacts
-
New tip architecture enables support for narrower pitches (e.g. 25um)
-
Advanced mechanical design combined with small contacts enables probing on smaller pads/pitches and improves durability and robustness
-
Rugged, cast aluminum housing has an outer diameter of 8.4” (213mm) and an inner, working diameter of 6.1” (155mm).
-
The Medium Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration.
-
Provides up to 59kLux at a 1” (25mm) standoff.
-
The SL1236 is characterized as a Large Aimed Spot Light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The spot light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version.
-
Diffuser and polarizer options are also available.
-
The SL1236 provides 14kLux at a working distance of 4” (100mm).
-
The SL073 is characterized as a Compact Spot Light with sufficient thermal management to provide 31kLux at a working distance of 4” (100mm).
-
A wide range of wavelengths are available from UV to IR.
-
Diffuser and polarizer options are also available.
-
For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
-
Standard cable lengths are 3, 5, 9 and 15 meters.
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
The IC Inline Controller (ICS 2.0) provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary.
-
The IC provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming.
-
All ICS models employ reverse input polarity protection.
-
A wash down version is provided with any light to which it is attached is also wash down.
-
0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636