-
For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
-
Standard cable lengths are 3, 5, 9 and 15 meters.
Advanced Illumination - Extension Cables
General Specs
Control Specs
Part No Key
More Product Information
-
The AL143, 2×3 Spot Light is available in a wide range of wavelengths with multiple lens options.
-
Ideal Illumination for medium working distances.
-
Convenient mounting with an M4 nut channel.
-
Washdown version is available
-
For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
-
Standard cable lengths are 3, 5, 9 and 15 meters.
-
Comprehensive I/O connections: Standard setup of up to 24 RF lines (up to 20 GHz) and 48 DC lines, with extensions to higher I/O connections possible.
-
Non-magnetic construction: Capable of characterizing qubits below 50 mK without magnetic interference when required.
-
Sample size: Proven with chips up to 10×10 mm in size.
-
Pressure-based contact: Connect test and measurement I/O to DUT pads using pressure only. No permanent connection required.
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
-
0 – 100% intensity control
-
For use with lights built with an ICS 2 after 3/1/2012
-
NOT COMPATIBLE with LLI37, BLI38, LLI67, and BLI68 “IC” Lights
-
IRIG A & B, NASA 36 and 1 PPS inputs standard
-
HaveQuick sync option
-
Propagation delay compensation
-
Zero latency time reads
-
Match Time output
-
IRIG B time code output
-
External Event time tags
-
On-board GPS receiver option
-
User programmable heartbeat rate
-
This High Intensity Spot Light is engineered for long throw and high brightness illumination.
-
Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
-
Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
-
Available in a wide range of wavelengths.
-
With an intensity of over 150 klx at 300 mm WD in continuous operation, the SL316 UltraSeal Spot Light delivers industry-leading intensity with consistent uniformity.
-
Available with narrow, medium, and wide lensing options as well as a non-lensed configuration for high dispersion.
-
Configurable in eleven wavelength options.
-
Compatible with all Ai inline and discreet control systems. The SL316 can be operated in continuous, gated continuous, pulsed, and adaptive pulsed modes with dimming options for brightness control.
-
The BL Series of Back-lit Backlights offer a low profile design with a planar, back-lit array of LEDs.
-
BL Series backlights are part of our pre-engineered, expandable family of products.
-
Expandable products provide custom size and power options with short lead times.
-
Model numbers include the BL0202, BL0404, and BL0808.
-
This series comes with LB111 Mounting Brackets.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636