-
The RL127 is characterized as a Large High Dispersion Bright Field ring light.
-
Non-lensed LEDs disperse light at broad angles, providing “soft” lighting for applications that require short to medium working distances.
-
The low-profile design is only .75” (19mm) thick, with an O.D. of 4.6” (117mm) and I.D. of 2.61” (66.3mm) allowing it to be used in space constrained applications.
-
The I.D. provides a standard 67mm diameter thread with a pitch of .75mm for further mounting flexibility.
-
A wide variety of wavelengths are available from UV to IR. An optional polarizer and/or diffuser may be used to further condition the light output.
-
The RL121 delivers 20kLux at a working distance of 100mm.
Advanced Illumination - RL127 Large High Dispersion Bright Field
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 455, 470, 530, 590, 625, WHI
Group 2 (Moderate-Risk) Applicable Wavelengths: 365, 375, 385, 395, 405
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
More Product Information
-
Part of the MicroBrite™ family of high performance, compact machine vision lights.
-
This line light series utilizes a fresnel lens for a compact form factor.
-
Provides an intensity level of 189kLux (working distance of 75mm)
-
Expandable in 50mm increments up to 750mm
-
The CX series is a group of expandable, Edge-lit Collimated Backlights characterized by their high intensity and low heat output.
-
Collimated backlights produce a distinct silhouette and can greatly improve edge detection of curved objects.
-
Available in 1” (25mm) increments for sizes up to 16” X 16” (406mm). All of our 2D expandable products can be specified in irregular (non-square) configurations.
-
This series comes with LB111 Mounting Brackets.
-
Very high precision, very low noise, excellent dynamics
-
Advanced user interface with direct numericentry and incremental rotary control
-
Fifty store/recall setup locations
-
Fully isolated outputs for maximum flexibility
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
GPIB, RS-232, USB and LXI Compliant LAN Ethernet are provided interfaces
-
High dispersion for reflective surfaces and shorter working distances.
-
Provides a narrower and less intense illumination area than the AL116.
-
IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
-
Available with polarization and diffusion light conditioning.
-
This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.
-
Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
-
Complete built-in control for continuous and strobe modes.
-
Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
-
Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
-
IP67 sealed enclosure suitable for washdown environments.
-
Rugged construction that has been tested to withstand over 1000lb.
-
Industrial grade LEDs providing high-intensity surface illumination of 65klux.
-
Daisy chain up to 4 for a combined length of 24”.
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
-
High Intensity: up to 9x brighter than the existing SL191 Pattern Projecting Spot Light and more than 3x brighter than the leading competitive structured light projector.
-
Projection patterns are easily configured with available reticles, including line, grid, cross, multiple lines, and half sphere, with custom reticles available.
-
Customizable: available in multiple wavelengths, including white.
-
Constructed with a large heat sink for improved LED thermal management to facilitate increased brightness while maintaining safe operating temperatures.
-
Ideal solution for machine vision inspection applications requiring structured illumination, including edge detection, locating offsets, and assessing topography.
-
The Wide Linear Diffuse Light series is ideal for the inspection of elongated or cylindrical objects.
-
Perfect for inspections requiring a multi-camera setup.
-
Can be provided with up to 4 viewing ports.
-
Expandable lengths from 6” – 36” (152 – 194mm) in 6” increments.
-
Universal input switching supply
-
24v regulated current DC – runs on 110-220v AC
-
Power indicator light
-
Tinned leads; marked negative/positive with wire nuts for easy connection
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636