-
This High Intensity Spot Light is engineered for long throw and high brightness illumination.
-
Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
-
Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
-
Available in a wide range of wavelengths.
Advanced Illumination - SL246 High Intensity Spot Light
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 455, 470, 505, 530, 590, 625, 660, 730, WHI
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
More Product Information
-
This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
-
Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology.
-
Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
-
Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK.
-
1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.
-
The DF241 is characterized as a Small Low Angle Dark Field ring light.
-
Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
-
A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator.
-
With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view.
-
A 25mm field of view is standard with an optional field of view of 35mm.
-
Available in a range of wavelengths from UV to IR.
-
*Engineered to provide comparable optical characteristics to our previous RL1360.
-
Very high precision, very low noise, excellent dynamics
-
Advanced user interface with direct numericentry and incremental rotary control
-
Fifty store/recall setup locations
-
Fully isolated outputs for maximum flexibility
-
Constant voltage or constant current operation with automatic crossover and mode indication
-
GPIB, RS-232, USB and LXI Compliant LAN Ethernet are provided interfaces
-
Pre-Engineered Scalability Enables Customized Emitting Lengths in 2″ Increments to 20″
-
Intense, Diffuse Lighting with 226 kLux at Emitting Surface
-
Multiple Available Wavelengths, Including Visible Monochromatics, Infrared, and White
-
Available Washdown Option for Difficult Environments
-
Can be Applied in Backlighting or Diffuse Front Lighting Geometries
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
-
Characterized as a Dual Function Ring Light, the RL5064 is capable of both bright and dark field illumination with independent control (depending on control option).
-
A wide variety of wavelengths may be specified from UV to IR.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional 3 point mounting barrel.
-
Up to 30 GHz bandwidth and 80 GS/s sample rate
-
The most advanced oscilloscope user interface
-
The industry’s only true hardware 14.1 Gb/s serial trigger
-
Low Jitter Measurement Floor and exceptional timebase stability
-
Comprehensive set of serial data analysis, debug, validation and compliance tools
-
Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility
-
Integrated standard and custom measurements and math functions for unrivaled analysis capability
-
Multi-lane serial data eye, jitter and crosstalk analysis
-
Real-time de-embedding, emulation, and equalization
Advanced Illumination’s AD-I3-CGX2 adaptor cable is for connecting I3/I3S configured lights with Cognex Gen2 Cameras. By default, an I3/I3S controller can connect directly to a Cognex Gen1 Camera but needs this adaptor to connect to a Cognex Gen2 Camera.
-
16 available wavelengths
-
Expandable in 6″ (150mm) increments up to 84″ (2.13m)
-
Optional heat sink for higher performance and/or high ambient temperatures
-
Optional light conditioning including polarization and diffusion
-
Optional IP65 rated sealing for washdown environments
-
3 lens options for narrow, medium and wide beam spreads
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636