Amplifier Research - 3000S1G2z5 - 3000 Watt CW, 1 - 2.5 GHz solid state, self-contained, air-cooled, broadband amplifier
The Model 3000S1G2z5 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.
The 3000S1G2z5, when used with a sweep generator, will provide a minimum of 3000 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 3000S1G2z5 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure.
The Model 3000S1G2z5 is equipped with a digital control panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides operational presentation of forward and reflected power plus operational status. Special features include a gain control, internal automatic leveling control (ALC) with front panel control of the ALC threshold, forward and reflected RF sample ports for precise power measurements and RF output level protection.
All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet. The bus interface connector is located on the back panel and positive control of local or remote operation is assured by a Local/Remote keylock on the front panel of the amplifier.
The low level of spurious signals and linearity of the Model 3000S1G2z5 make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.
The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
Document
More Product Information
AR RF/Microwave Instrumentation offers a product line of fiber optic cables for use with our Field Analyzer systems. The following table describes these fiber optic cables.
The export classification for this equipment is EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
The FAC7000 series cables consist of a single duplex, 62.5/125um glass core fiber cable assembly terminated in color coded (Yellow) and keyed (#3), shuttered, compact, E2000 connectors.
The SSISOC200V10K18G System is designed to develop a 200 V/m field level at a 1m test distance for ISO 11452-2 and ISO 11452-5 testing from 10 kHz to 18 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSISOC200V10K18G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.
The FA7000 series Field Analyzers are specifically designed to measure modulated electric fields. Each kit provides a web-based, oscilloscope-type display of the instantaneous electric field strength or power density over time and calculates the minimum, maximum, and average field strength of the waveform as displayed. Each kit consists of an isotropic Field Sensor, glass fiber-optic cabling, a miniature tripod, carrying case, and a Processor Unit. The Processor Unit stores all of the necessary linearity corrections for its associated Field Sensor.
Our RF horn antennas exhibit increasing gain, with frequency up to 18 dBi at 1000 MHz, helping to compensate for losses that occur elsewhere in an RF test system. Use these antennas in shielded rooms or free space.
The FI7000 interface provides both power to and communication with the FL/PL 7000 series probes. A low-level loop back fiber optic connection is used to sense unexpected disconnect of laser driven fibers to ensure user-safe operation. As an additional safety measure, shuttered connectors are used on all fiber optic connections to and from the probe.
The FI7000 can be used with the FM7004A Field Monitor (using the provided 0.5 meter fiber optic cable) or a PC by direct communication using the USB, GPIB, or RS-232 interfaces
AR RF/Microwave Instrumentation offers a product line of fiber optic cables for use with our field measurement systems. The following tables describe the fiber optic cable sets and their compatibility with the different field measurement products.
The FC2000 series cable sets consist of a single duplex, 200/230um glass core fiber cable assembly terminated in color coded SMA 905 connectors.
-
Pulse Amplifier
-
M1–M5
-
10,000 Watts
-
8GHz–10GHz
The MP18000B includes the equipment listed below. The equipment is housed in a 19¡¨ wide by 7¡¨ (4U) high instrument case. Please refer to individual product specification sheets for details. Model MP18000B equipment list: „h Model FM7004A Field Monitor „h Model FL7030/Kit Electric Field Probe Kit (supplied with data from an accredited lab) „h Model FL7218/Kit Electric Field Probe Kit (supplied with data from an accredited lab)
The export classification for this equipment is EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
Amplifier Research
Founded in 1969, Amplifier Research is a world-class source for broadband high power, solid state, RF amplifiers and microwave amplifiers, TWT amplifiers, log periodic antennas and high-gain horn antennas, plus EMC test equipment, software and field probes and monitors. Throughout its 50 years (and counting), AR has been responsible for a number of “firsts” which have transformed not only EMC and RF testing but also the industries and equipment affected by these tests. A sampling of these innovations includes:
- 10,000-watt tube amplifiers,100-watt solid-state • 100-1000 MHz instantaneous bandwidth Class A amplifier
- First production 16,000-watt solid-state linear amplifier from 10 kHz to 225 MHz
- 50,000-watt Class A power amplifier up to 225 MHz
- 0.7 to 6 GHz high-power Class A & AB amplifier
Additionally, they push the limits of state-of-the-art design and have ruggedized their products to make them virtually indestructible. AR amplifiers are fully tested to the extreme to ensure customers receive a product that is built to last.
Contact Details
Amplifier Research Corporation, Ametek CTS
160 Schoolhouse Rd., Souderton, PA 18964-9990, USA
Phone: 215-723-8181
Customer Service: 215-723-0275
Test & Measurement
Download Line Card
Document
