Amplifier Research - ATH200M1G-1 - 200 - 1000 MHz, 10,000 Watt input power, High Gain Horn Antenna
The Model ATH200M1G-1 high-gain horn antenna exhibits increasing gain with increasing frequency (up to 18dB at 1000MHz).
With this useful performance characteristic the antenna helps compensate for losses that occur elsewhere in an RF test system - losses which generally increase with frequency. The Model ATH200M1G-1 is well suited for either shielded room or free space testing. Optimum performance is achieved when it is used with our Model 3000W1000 and 4000W1000 broadband amplifier for RF susceptibility testing. Field strengths generated by the Model ATH200M1G-1 will be identical to those shown by the curves for the Model ATH200M1G but continuing up to the 10,000 watt level. In shielded rooms, reflections and room losses may reduce the available field. AR suggests a design safety factor of 100% in the selection of power amplifiers. The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
EXPORT CONTROLLED DATA
These commodities, technology, or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
Document
Document
More Product Information
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
One Pod supports link widths of up to 4-lanes. Multiple pods can expand link widths up to 16-lanes.
-
Downward compatible with PCIe 1.0 to 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Eight differential probe cables support simultaneous upstream and downstream capture
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-sensitivity amplifiers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal triggering and capture
-
Interposer power is independent of host system.
-
Power supply, 120/220 input, 12V/3A output
-
LEDs provide quick indication of power and status
-
Size: 170 x 107 x 34 mm (6.7 x 4.2 x 1.3 in)
-
Works together with multiple VIAVI Xgig PCIe Analyzer chassis types
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
The SSISOV100V20M18G System is designed to generate up to 100 V/m CW at a 2m test distance for ISO 11451-2 full-vehicle testing from 20MHz-18GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSISOV100V20M18G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.
-
16 way Optical GPS/GLONASS Antenna Distributor
-
Dual Redundant Power Supplies
-
Alarm Output
-
Run secure GNSS antenna feeds within buildings up to 2000m
The Model ATR26M1G is a wide band, high gain, log periodic antenna that is uniquely suited for use in both traditional applications as well as in new compact chambers.
-
1000 watts CW
-
10kHz-400MHz
-
Class A
-
Portable
-
Full VSWR– tolerant
-
CE & RoHS Compliant
Over the years, ACS has delivered test equipment and controls projects for commercial aircraft OEMs, tier suppliers, and defense contractors in the aerospace market. We are well-versed in the testing of systems, sub-systems and components used in aerospace development, research, production and Maintenance, Repair and Overhaul (MRO) applications.
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
Amplifier Research
Founded in 1969, Amplifier Research is a world-class source for broadband high power, solid state, RF amplifiers and microwave amplifiers, TWT amplifiers, log periodic antennas and high-gain horn antennas, plus EMC test equipment, software and field probes and monitors. Throughout its 50 years (and counting), AR has been responsible for a number of “firsts” which have transformed not only EMC and RF testing but also the industries and equipment affected by these tests. A sampling of these innovations includes:
- 10,000-watt tube amplifiers,100-watt solid-state • 100-1000 MHz instantaneous bandwidth Class A amplifier
- First production 16,000-watt solid-state linear amplifier from 10 kHz to 225 MHz
- 50,000-watt Class A power amplifier up to 225 MHz
- 0.7 to 6 GHz high-power Class A & AB amplifier
Additionally, they push the limits of state-of-the-art design and have ruggedized their products to make them virtually indestructible. AR amplifiers are fully tested to the extreme to ensure customers receive a product that is built to last.
Contact Details
Amplifier Research Corporation, Ametek CTS
160 Schoolhouse Rd., Souderton, PA 18964-9990, USA
Phone: 215-723-8181
Customer Service: 215-723-0275
Test & Measurement
Download Line Card
Document
