Amplifier Research - ATL80M1G - 80 - 1000 MHz, 2000 Watt input power, Log-Periodic Antenna (includes vertical to horizontal pivot)
The Model ATL80M1G is a wide band, high-gain, log periodic antenna that provides field intensities of up to 500 V/M. With an average gain of 7.5 dB over isotropic and gain flatness of ± 1 dB, the Model ATL80M1G supplies the constant, high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room.
The Model ATL80M1G is a wide band, high-gain, log periodic antenna that provides field intensities of up to 500 V/M. With an average gain of 7.5 dB over isotropic and gain flatness of ± 1 dB, the Model ATL80M1G supplies the constant, high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. It can also be used as a receiving antenna for RF emissions testing. The Model ATL80M1G is compact and lightweight for ready mobility, yet is built tough for the extra demands of outdoor use and easily mounts on a flat surface or tripod. Similar to our popular Model ATL150M1G the Model ATL80M1G provides the lower frequency response required for many often used test specifications. The Model ATL80M1G series allows polarization change without removing the antenna from the tripod.
EXPORT CONTROLLED DATA
These commodities, technology, or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
Document
More Product Information
The FA7000 series Field Analyzers are specifically designed to measure modulated electric fields. Each kit provides a web-based, oscilloscope-type display of the instantaneous electric field strength or power density over time and calculates the minimum, maximum, and average field strength of the waveform as displayed. Each kit consists of an isotropic Field Sensor, glass fiber-optic cabling, a miniature tripod, carrying case, and a Processor Unit. The Processor Unit stores all of the necessary linearity corrections for its associated Field Sensor.
-
2MHz–18GHz
-
2–1000 V/m
-
User–selectable X, Y, Z Axes
AR’s microwave amplifiers are just as tough and dependable as our RF amplifiers, and they are backed by the same comprehensive warranty. Our microwave amplifiers offer the hard-to-find combinations of power and bandwidth in frequency increments and power output you need for today’s test applications.
The FA7000 series Field Analyzers are specifically designed to measure modulated electric fields. Each kit provides a web-based, oscilloscope-type display of the instantaneous electric field strength or power density over time and calculates the minimum, maximum, and average field strength of the waveform as displayed. Each kit consists of an isotropic Field Sensor, glass fiber-optic cabling, a miniature tripod, carrying case, and a Processor Unit. The Processor Unit stores all of the necessary linearity corrections for its associated Field Sensor.
-
Full control from oscilloscope through ProBus interface
-
Dc to 100 MHz bandwidth
-
Outstanding 100,000: 1 Common Mode Rejection Ratio (CMRR)
-
Gain of x1 or x10
-
Industry-leading overdrive recovery
-
Low noise
-
Selectable BW limiting
-
Two gain control modes when connected to a Teledyne LeCroy oscilloscope
-
Built-in precision Voltage Generator (PVG)
-
Comparator and true differential offset modes
-
150 Watts CW
-
10kHz–1000MHz
-
Class A
-
Portable
-
Full VSWR-tolerant
-
CE & RoHS compliant
-
High Efficiency
The SSIEC10V2M System is designed to develop a 1.5 x 1.5 meter uniform field area (UFA) of up to 18 V/m CW at a 2m test distance for IEC 61000-4-3 testing from 80MHz-6GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSIEC10V2M AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.
-
800MHz–3.6GHz
-
80–800 V/m
-
User–selectable X, Y, Z Axes
Amplifier Research
Founded in 1969, Amplifier Research is a world-class source for broadband high power, solid state, RF amplifiers and microwave amplifiers, TWT amplifiers, log periodic antennas and high-gain horn antennas, plus EMC test equipment, software and field probes and monitors. Throughout its 50 years (and counting), AR has been responsible for a number of “firsts” which have transformed not only EMC and RF testing but also the industries and equipment affected by these tests. A sampling of these innovations includes:
- 10,000-watt tube amplifiers,100-watt solid-state • 100-1000 MHz instantaneous bandwidth Class A amplifier
- First production 16,000-watt solid-state linear amplifier from 10 kHz to 225 MHz
- 50,000-watt Class A power amplifier up to 225 MHz
- 0.7 to 6 GHz high-power Class A & AB amplifier
Additionally, they push the limits of state-of-the-art design and have ruggedized their products to make them virtually indestructible. AR amplifiers are fully tested to the extreme to ensure customers receive a product that is built to last.
Contact Details
Amplifier Research Corporation, Ametek CTS
160 Schoolhouse Rd., Souderton, PA 18964-9990, USA
Phone: 215-723-8181
Customer Service: 215-723-0275
Test & Measurement
Download Line Card
Document
