Amplifier Research - MT06002 - Multi-Tone RF Radiated Immunity System

Amplifier Research - MT06002 - Multi-Tone RF Radiated Immunity System
Multistar™ Multi-Tone RF Radiated Immunity Test System, 10 kHz - 6 GHz. System includes a vector signal generator, vector signal analyzer, RF pre-amplifier, RF field probe and monitor, RF switch matrix, embedded computer, monitor, keyboard and automated immunity test software.

More

Complete Testing Solutions to the following standards:

RADIATED IMMUNITY
- EN/IEC 61000-4-3
- ISO11452-2 Auto (ALSE)
- ISO11452-3 Auto (TEM cells)
- ISO11451-5 Auto (Strip Line)
- ISO11451-2 Full Vehicle
- DO-160 Section 20.5 (Substitution Method)
- EN/IEC 60601-1, -2
- EN 50130-4
- EN 61000-6-1/2
- EN 55024

CONDUCTED IMMUNITY
- EN/IEC 61000-4-6
- ISO11452-4 Auto (BCI Method)
- DO-160 Section 20.4 (Substitution Method)
- MIL STD 461 CS114
- EN/IEC 60601-1, -2

The Model MT06002 (Multistar™ Multi-Tone Tester) is a state-of-the-art system designed to test RF Radiated and Conducted immunity faster than ever before possible. By testing multiple frequencies (tones) at once, test times can be reduced by a factor equivalent to the number of tones selected. The number of tones is only limited by the signal generator bandwidth (1000MHz) and the size of the amplifier used with the system.

The MT06002 contains all the instruments needed to perform radiated and conducted immunity testing for various immunity standards except the required amplifiers, antennas and directional couplers. Amplifiers can be sized and selected based on your required field levels and testing needs. Up to 4 RF amplifiers and directional couplers can be controlled and monitored and power can be delivered to up to 4 antennas to generate the desired fields. The system contains a vector signal transceiver, an RF field probe and monitor, an RF switch matrix, and automated radiated immunity test software. Everything is contained in a single housing, which eliminates setup issues. The software includes automated routines to calibrate the field and maximize the speed of the test, by generating the most tones possible, while still meeting the Linearity and Harmonics requirements of the specification. In the event of a EUT failure, margin investigation (thresholding) and traditional single tone testing can be performed causing a slowing of the test only in the areas of concern. This system has the versatility needed for every test laboratory and equipment manufacturer while adding the benefit of reduced test times and greater throughput.

The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. 

More Product Information

Amplifier Research - MT06000A - Multi-Tone RF Radiated Immunity System
Multistar™ Multi-Tone RF Radiated Immunity Test System, 65 MHz - 6 GHz. System includes a vector signal generator, vector signal analyzer, RF pre-amplifier, RF field probe and monitor, RF switch matrix, embedded computer, monitor, keyboard and automated immunity test software.

NH Research - S600 Series Multi Channel Power Supply Tester - Multi-Channel Test System for High-Speed Parallel Testing of Adapters, Chargers, LED Power Drivers, DC Converters, Voltage Regulator Modules, Point-of-Load Converters & AC-DC Power Supplies
  • Maximum test throughput through parallel testing of multiple devices & outputs
  • Ease of reconfiguration or expansion through front-loading, card-based instruments
  • Built-in waveform digitizers on all instruments
  • Space-saving design
  • emPower® Test Executive

Amplifier Research - RFDS-80ch - 80 Channel RF Distribution System, > 3 Watts per channel, 0.7 to 6 GHz HTOL/Burn-in System
The Model RFDS-80CH is an equipment package consisting of 10 RF power amplifiers, signal generator and power splitters providing 80 RF channels at > 3W each up to 6GHz. The equipment is housed in a 40U cabinet. AC mains power distribution is provided along with all the necessary interconnect cables.
The Model RFDS-80CHM1 adds vector modulation capability.
The supplied equipment is listed below. The AR equipment in this system carries an export classification of EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. Please refer to individual product specification sheets for details.

Amplifier Research - RFDS-16ch - 16 Channel RF Distribution System, > 3 Watts per channel, 0.7 to 6 GHz HTOL/Burn-in System
The Model RFDS-16CH is an equipment package consisting of an RF power amplifiers, analog signal generator, coupler and power splitters providing 16 RF channels at > 3W each up to 6GHz. The equipment is housed in a 12U enclosure. AC mains power distribution and control is provided along with all the necessary interconnect cables.
The Model RFDS-16CHM1 adds vector modulation capability.
The supplied equipment is listed below. The AR equipment in this system carries an export classification of EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. Please refer to individual product specification sheets for details.

Amplifier Research -  RFDS-8ch  - 8 Channel RF Distribution System, > 3 Watts per channel, 0.7 to 6 GHz HTOL/Burn-in System
The Model RFDS-8CH is an equipment package consisting of an RF power amplifiers, analog signal generator, coupler and power splitters providing 16 RF channels at > 3W each up to 6GHz. The equipment is housed in a 12U enclosure. AC mains power distribution and control is provided along with all the necessary interconnect cables.
The Model RFDS-8CHM1 adds vector modulation capability.
The supplied equipment is listed below. The AR equipment in this system carries an export classification of EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. Please refer to individual product specification sheets for details.

Amplifier Research - SSMIL200V2M40G - 200 V/m field strength for military testing applications from 2 MHz to 40 GHz Predefined System
The SSMIL200V2M40G System is designed to develop a 200 V/m field level at a 1m test distance for MIL-STD-461D/E/F/G testing from 2MHz to 40 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSMIL200V2M40G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.

Amplifier Research - SSMIL200V2M18G - 200 V/m field strength for military testing applications from 2 MHz to 18 GHz Predefined System
The SSMIL200V2M18G System is designed to develop a 200 V/m field level at a 1m test distance for MIL-STD-461D/E/F/G testing from 2 MHz to 18 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSMIL200V2M18G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.

Amplifier Research - SSMIL200V10K18G - 200 V/m field strength for military testing applications from 10 kHz to 18 GHz Predefined System
The SSMIL200V10K18G System is designed to develop a 200 V/m field level at a 1m test distance for MIL-STD- 461D/E/F/G testing from 10 kHz to 18 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSMIL200V10K18G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.

Amplifier Research - SSMIL50V2M40G - 50 V/m field strength for military testing applications from 2 MHz to 40 GHz Predefined System
The SSMIL50V2M40G System is designed to develop a 50 V/m field level at a 1m test distance for MIL-STD-461D/E/F/G testing from 2MHz to 40 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSMIL50V2M40G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.