Brandywine - VME SyncClock32 Single Slot 6U, 32-bit Precision Timing Module
-
6U single slot VME form factor
-
Nine digit time display
-
Optional Have Quick synchronization input
-
IRIG's A and B and NASA 36 time code inputs
-
1PPS sync input
-
IRIG B output
-
1PPS and time code inputs are redundant
-
Single-slot including GPS option
-
Zero latency time reads, microseconds through years
-
External Event input (optional eight and sixteen inputs)
-
Match Time output
-
Programmable Heartbeat rate
-
Video Time Inserter Option
-
Many additional options
The VME timing card is a standard board level product of Brandywine Communications. With a single slot 6U, 32 bit precision timing module, the VME card is compatible with VME computers. Precision synchronization to various inputs and convenient timing outputs to external equipment are standard on Brandywine’s VME card. With Brandywine’s countless options, you can customize your VME card to fit your needs. The VME syncclock32 card has a rich history in many mission critical deployments around the world and provide the quality and reliability expected from Brandywine’s bus level timing products.
More Product Information
Rugged storage array satisfying advanced storage requirements with limitless capacity for sensitive data, rapidly accessed and protected using fast NVMe SSDs and a secure host.
- Light, Durable, Ready for Extremes - Much lighter yet more rugged than any solution on the market. SWaP optimized for field-deployment.
- Ultra-fast Read/Write Speeds - Quickly store and retrieve large amounts of critical data in seconds with 27.2 GBs read/write speeds.e
- Full Control & Configurability - Drive magazines that hold 8 drives at once or 24 individually removable drives enable quick removal and replacement.
-
NTP time server
-
PTP v2 Grand Master Clock
-
PTP v2 Transparent Clock
-
PTP v2 Slave Clock
-
NTP client
-
PTP protocol supports:
-
Multicast
-
Layer 2 or IP
-
2-step clock
-
Peer-to-Peer (P2P) or End-to-End (E2E) delay mechanism
-
-
Built-in GPS receiver (GMC variant) with time accuracy to absolute time < 50ns (with GPS lock)
-
PTP accuracy < 20 nanosecond (*)
-
4 x 10/100/1000BASE-T(x) ports
-
4 x 10/100/1000BASE-X combo ports
-
Wide operating temperature: [-40°F to 158°F] / [-40°C to 70°C]
-
100-240AC power input
-
Network redundancy: RSTP protocol
-
Network management: Web, telnet, CLI and SNMP v1/v2/v3 with RMON
-
Multicast filtering: IGMP snooping or static multicast filters
-
IEEE802.1Q VLAN
-
Event notification: through Syslog, Email, and SNMP trap
-
SOSA Aligned
-
3U VPX Form Factor
-
Low SWAP applications
-
Ruggedization Level 200
-
Provides low noise reference using Chip Scale Atomic Clock (CSAC)
-
Optional SAASM GPS available with RS232 key-fill connectivity
-
11 Radial Clock Outputs
-
Programmable 3GHz outputs
-
OpenVPX Backplane support for 1000BASE-KX, 10GBASE-KR, or PCIe
-
IRIG’s A and B and NASA 36 time code inputs
-
+3.3V or +5V signaling
-
1PPS Sync input
-
External Event (Time Tag) input
-
Three programmable pulse rate outputs
-
Match Time output
-
Industrial Temperature Range option
-
Optional on-board GPS option
-
Optional HaveQuick input/output
-
Optional IRIG B time code output
-
Versatile GPS Master Clock with IRIG-B reference input
-
Dual 10/100BaseT Network interface with Network Time Protocol (NTP)
-
Time Code Outputs, IRIG B, IRIG E, Have Quick
-
High Stability Ovenized oscillator is standard
-
Single string or dual redundant configuration
-
Accurate & reliable time data from a trusted source
-
Control over configuration via web browser
-
Synchronization between users – eradicates discrepancies
-
System time stamping (e.g. for e-commerce transactions, e-mail sent & receive, etc) is highly accurate
-
Automatic systems procedures, such as backups, occur at the correct time and in the correct order
-
16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Link widths up to 4-lanes
-
32GB memory (16GB Up Stream and 16GB Down Stream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
Full support of LTSSM for PCI Express
-
Multicolored LEDs on the front panel specify link speed, lane width and performance
-
Field replaceable modular fan and power supply assemblies
-
Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
High performance GPS disciplined Time/Frequency standard
-
Ethernet Interface for management and control
-
Network Time Protocol (NTP)
-
Multiple 1PPS outputs with individual delay compensation
-
Multiple Low Phase Noise 10MHz outputs with software programmable level
-
Time Code outputs including Have Quick, IRIG A, IRIG B, IRIG E, IRIG G
-
Sync to GPS or to Have Quick/1PPS per ICD-GPS-060
-
Choice of internal disciplined OCXO or Rubidium Oscillator
-
Network Enabled Distribution Amplifier
-
Low Phase Noise Reference Frequency Outputs
-
Fault Alarm Output
-
1U 19″ Rack Mount
-
Frequency Synthesizer Option
-
Hitless Switching of Reference
-
Programmable Amplitude
-
Propagation Delay Compensation
-
10 MHz Standard, Other Frequencies Available
Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com