IntelliPower - FA00393 Power Distribution Unit
-
115Vac Input, L5-30P1 on 18" Attached Power Cord, Qty 8 each L5-15R and Qty 1 each 5-20R on 9" Attached Power Cord Output, Each Output having a Circuit Breaker/Switch control, 1U9.5, Aluminum
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 1U, ≤23"D |
Input Voltage | 115 VAC |
Input Frequency | 50/60 |
Input Connector | Pigtail |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
More Product Information
-
3000VA, 2400W, Isolated 208VAC Single Phase 50/60Hz Input and 120VAC, 60Hz Output, Double Conversion Input On Line UPS and Power Conditioning System with Internal Batteries and Power Factor Correction for Commercial Applications
-
3000VA, 2400W, 120/208VAC, 50/60Hz Input and 120VAC 60Hz Output, Double Conversion, On-Line, High Temperature, Isolated, Rugged UPS with Power Factor Correction for Military Applications
-
Wide Range 85 to 270 VAC, 50/60 Hz Isolated Input, 2500 VA, 2000 W Double Conversion, On Line, Light-Weight UPS with 120 VAC, 60 Hz Output and a 7 Lithium Iron Phosphate Hot Swap Battery Drawer - 4U, 20” Deep
-
Rugged, Double Conversion, 208VAC Input and 230VAC Output, Online UPS System with Power Factor Correction
- Single-phase, 115 VAC at 60 Hz Input, Isolated, Double Conversion Rugged Frequency Converter with 2000 Watts at 24 VDC output to provide Power Conversion and Power Conditioning
-
7500VA, 5500W, 220VAC 1Ph 45-440Hz Isolated Input, 220VAC 60Hz Output, Freq Changer, 24BHS EBM, 3U25, Terminal Block AC Input Panel Mount, Terminal Block AC Ouput Panel Mount, SNMP, 2 x 2 Anderson EBP, Neutral Bonded, Double Conversion, Rugged, High Temperature, On-line UPS with Input Power Factor Correction
-
6600VA, 5800W, 440Vac 3Phase 60Hz Isolated Input, 220Vac 60Hz Output, Freq Changer UPS WITH EBM (96V), 4U26.7, Aluminum, Corded, SNMP, 2 2x2 Anderson, L6-30R Corded
-
Precise programming of voltage and current slew rate for sensitive loads.
-
Modules within one chassis can be connected to different loads and controlled independently.
-
Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet/IP (Industrial Protocol)) enable real-time digital control.
-
Built-in energy meter calculates the delivered energy throughout a process or period of time.
-
Optional real time clock enables accurate timestamping of events.
-
Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
-
Programmable analog interface scaling facilitates incorporating the ASD to existing systems with minimal effort.
-
Load impedance measurement, including rate-of-change calculations, enable load "state of health" monitoring and implementation of system preventive maintenance algorithms
-
Programmable filter bandwidth of the output voltage, current and power monitors let the user accommodate their response speed to particular needs.
-
Full featured GUI (Graphical User Interface) helps to test and debug the system by communicating with the power supply in real time.
-
Dual Input, Pole Mount Double Conversion Isolated On Line 120 and 277 VAC Input, 12, 24 and 48 VDC and 120 VAC pass through Output UPS System with Power Factor Correction in a NEMA 3R cabinet for Industrial applications
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form