IntelliPower - FA00394 Power Distribution Unit
-
230Vac Input, L6-30P1 on 43.5 Power Cord, L6-15R10 Output, Each Output having a Circuit/Switch control, 1U9.5, Aluminum
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 1U, ≤23"D |
Input Voltage | 120 VAC |
Input Frequency | 50/60 |
Input Connector | Pigtail |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
More Product Information
See Specifications & Details tab for additional information
-
Combine up to 16 SPDT or 8 multiport, high-performance relays in a 2U footprint
-
Latching/Terminated options (EX7204L)
-
LXI/LAN and USB command and control options
-
Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
-
Flexible API supports IVI and Linux development environments minimizing software investment
-
LXI trigger event implementation provides seamless test synchronization with external devices
-
Store up to 128 relay configurations for quick recall, including automatic power-up state
-
1500VA, 1050W, 120VAC 45-450Hz Input and 120VAC 60Hz Output, Double Conversion, On-Line, High Temperature, Isolated, Rugged IPC with Power Factor Correction for Military Applications
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
-
High efficiency: up to 94%
-
Low no load power consumption <210mW
-
Low leakage current ≤100μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 70°C
-
Wide input voltage range 85 - 264 VAC
-
Isolation 2x MOPP
-
Operating altitude 5000m
-
Convection cooled 120 W / Forced cooled 175 W
-
EN 55011/32 Class B conform
-
On-Off power switch
-
30 A Circuit Breaker
-
Inlet - NEMA L5-30
-
Outlets – NEMA L5-30R
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
-
Low output capacitance
-
High bandwidth up to 30kHz
-
High resolution I-V curve simulates static and dynamic conditions
-
Designed for high speed Maximum Power Point Tracking (MPPT)
-
Can be integrated into a multi-channel system for higher power testing
-
Low voltage, high bandwidth version for DC Power Optimizers
-
EN50530 support
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
500 Watts, 12 VDC Input and Output, 9 Toggle Switched Circuit Breakers, 4 Position Input Terminal Block Strip, and 6 and 10 Position Output Terminal Block Strips
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form