IntelliPower - FA00396 Power Distribution Unit
-
230Vac Input, L6-30P1 on 44.0” Power Cord, Qty 4 L630R1 on 24" Cords, Each Output having a Circuit/Switch control, 1U9.5, Aluminum
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 1U, ≤23"D |
Input Voltage | 120 VAC |
Input Frequency | 50/60 |
Input Connector | Pigtail |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
More Product Information
Configurable and SWaP-C optimized with maximum storage capacity, processing power, and intelligence, our ruggedized, TAA-compliant BAM servers are the perfect solutions to accelerate and sustain ever-evolving applications
- Leading Performance CPUs - Supports dual Intel® 3rd Gen Xeon® SP CPUs with hardware-based encryption for enhanced compute and networking.
- High-end GPUs and FPGAs - Supports multiple double-wide, high-end Intel® and NVIDIA® GPUs and FPGAs to accelerate AI/ML/DL workloads at the edge.
- Fast NVMe SSDs - Supports up to 8 high-speed NVMe or 9 SAS/SATA SSDs to increase read/write speeds (FIPS 140-2/3 available).
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Low cost ELT option
-
Frequency counter provides external frequency measurement
-
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
-
Eight or more hours of operation before recharge
-
Automatic power shut-down
-
Ergonomic design
-
Monochrome (G-033B) and color (G-033C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
3500 VA, 3000 W, 115 VAC at 50 or 60 Hz input and 115 VAC at 60 Hz output, double conversion, rugged, high temperature, isolated, on-line UPS with external EBM, with power factor correction for Navy shipboard applications
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
-
Input AC, Input Frequency Input and Output AC, Output Frequency Output, Double Conversion, On-Line, Isolated Rugged UPS with Power Factor Correction for Military Applications
-
SAS, BSS, Umbilical systems
-
AC Input isolation
-
Power Validation Fixtures
-
Redundant OV & OI
-
84VDC, 2.5 Amps
-
120VAC 50/60Hz Input, 2U24
-
Aluminum
-
IEC60320-C14
-
Battery Drawer
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form