-
Characterized as a Dual Function Ring Light, the RL5064 is capable of both bright and dark field illumination with independent control (depending on control option).
-
A wide variety of wavelengths may be specified from UV to IR.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional 3 point mounting barrel.
IntelliPower - FA00396 Power Distribution Unit
-
230Vac Input, L6-30P1 on 44.0” Power Cord, Qty 4 L630R1 on 24" Cords, Each Output having a Circuit/Switch control, 1U9.5, Aluminum
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 1U, ≤23"D |
Input Voltage | 120 VAC |
Input Frequency | 50/60 |
Input Connector | Pigtail |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
More Product Information
4U and 5U expansion chassis with ample power to run lots of PCIe slots and host multiple option cards. Provide total bidirectional throughtput between a host system and a target expansion system, delivering expanded I/O capabilities needed to support evolving workloads.
- Up to 18 Additional PCIe 3.0 Slots - Incorporate up to 18 additional PCIe 3.0 slots, allowing you to scale your system in response to your most complex application or program needs.
- System Design Flexibility - Connect host card to any system with a x16 slot. Easily add or remove I/O devices or make changes to existing components.
- Performance Optimization - Offload tasks from the host system and dedicate specific tasks to separate option cards, reducing congestion, latency, and resource contention.
-
High efficiency: up to 81.6%
-
Low no load power consumption <95mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤10μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 45°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX6-FM
-
2500VA, 2.0KW, 120 VAC 60 Hz Input, 120 VAC, 60 Hz Output, Frequency Follower, Galvanic Isolation, Power Factor Corrected, Rack Unit, 2U High x 17" Wide x 21" Deep, Rugged, Double Conversion, to Provide Power Conditioning and Tempest Isolation for Secure Military Applications
-
1500VA, 1050W, 115 1PH/3PH 400Hz-50/60Hz Input and 120V 60Hz Output, Double Conversion, On Line, Extreme High Temperature, Isolated, Rugged UPS with Power Factor Correction for Airborne Applications
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 lanes, or dual-port operation of 2 links of 2 lanes each
-
Front-end module plugs into system-under-test
-
U.2 NVMe SSD DUT (not supplied) plugs into the Back-end module
-
Adjustable tray clamps and quick-release latch allow for snug fit and hot swap testing
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supplied with high-quality, custom SFF-8764 cables for Analyzer system attachment
-
Supports side-band signal triggering and capture
-
Supplied power brick makes Interposer power independent of host system
-
LEDs give quick indicators of power and status
-
Works with VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
-
High spatial resolution
-
IEEE 1588 PTP
-
Power over Ethernet
-
Defect pixel masking
-
Monochrome (GT4400) and color (GT4400C) models
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form