IntelliPower - FA10053 Power Distribution Unit
-
External Input/output panel with GFD, ISOMETER, and EPO
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 6U, ≥24"D |
Input Voltage | 208 VAC |
Input Frequency | 50/60 |
Input Connector | Terminal Block |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | Terminal Block |
More Product Information
-
Three independent, isolated 1,700W channels, 5,100W total
-
1U rack-mount chassis
-
Eight output options
-
Multi-language, intuitive, color touch panel control
-
Global 3-Phase AC Input options for system phase balancing
-
Active power factor correction (PFC)
-
Multi-channel programmable sequencing, ramps, and delays
-
Full remote control via Virtual Panels™ GUI
-
Standard LXI Ethernet, USB and RS232 control interfaces
-
Optional GPIB control interface or isolated analog programming
-
Provides eight channels of programmable DC power with output isolation function
-
Output disconnect function
-
Total control via Ethernet within power supply.
-
Mounted in custom in transportable shock-mount case.
35 ppm AC/DC multifunction calibrator for multimeters, power meters and generally all kinds of electric meters. Implementing modular design, 9010 can be further customized to calibrate oscilloscopes, insulation testers, sources and transducers.
- 35 ppm accuracy
- 400 MHz scope option
- Power quality functions, voltage from current
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
1500VA, 1350W, 115VAC at 60Hz Input and 115VAC at 60Hz Output, Double Conversion, Rugged, High Temperature, Isolated Online UPS with Hot Swap Battery Drawer and Power Factor Correction for Navy Shipboard Applications
-
Monochrome (G-234B) and color (G-234C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
-
Rugged Rack Mount, Double Conversion On-Line UPS & Isolated Power Conditioning System with Power Factor Correction, Front Panel Hot Swap Battery & SNMP Communications for Military Applications in a 1U Enclosure
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1-link of 4-lanes, or 2-links of 2- lanes
-
Adjustable tray clamps and quick-release latch allow for snug fit and quick SSD swap
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supplied with high-quality, custom SFF-8764 cables for analyzer system attachment
-
Supports side-band signal capture and triggering
-
Supplied power brick makes interposer power independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analysis tools for trace capture with flexible filters, triggers and more
-
Provides consistent, repeatable capture of link training, negotiation and other data
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form