IntelliPower - FA10071 Power Distribution Unit
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 6U, ≥24"D |
Input Voltage | 120 or 240 VAC |
Input Frequency | 50/60 |
Input Connector | Terminal Block |
Output Voltage | 115 VAC |
Output Frequency | 50/60 |
Output Connector | Terminal Block |
More Product Information
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
- Two 120/240 V Outlets
- Circuitry rated for 20 A
- 8’ Flexible Power Cord
- Shrouded Safety Banana Jacks
- Stable footprint with non-slip feet
-
Modular
-
Control up to 95 assets
-
Control multiple AC and DC power supplies and loads in one mainframe
-
Create “virtual assets”
-
Web browser control
-
User configurable
-
Highest Power Density
-
Simple integration
-
PFC
-
Universal AC/DC input
-
Up to 6kW in one mainframe
-
1kW DC modules
-
PFC ≥0.95
-
Reduced space and logistics hassles
-
High power density
-
Handles DC and AC power and load modules
-
User configurable
-
Universal AC/DC input
-
-
Ease of integration
-
Web browser control
-
Trigger bus
-
Configure modules to parallel or series operation "on the fly"
-
-
The T‑Gauge® Control Unit (TCU) is the central component of the T‑Gauge® family of products and serves as the source of the optical and electrical signals necessary to generate and detect terahertz. The TCU also transforms analog data into a digital signal that can be analyzed using the onboard processor and interacts with the wide variety of THz accessories.
-
The TCU is a 19 inch (483 mm) rack, wall, or table mountable instrument, consisting of an ultrafast laser, high-speed optical delay, ranging optical delay, power supplies, and signal conditioning electronics, with connectors for convenient interfacing to various optical and electronic components. The high-speed delay included in the TCU can be chosen from a number of delay length and speed options. When utilized in conjunction with T-Gauge® accessories, the TCU enables the user to generate and detect pulsed terahertz energy for a wide variety of measurements.
-
3000 VA, 2100 Watts, 85 thru 265 VAC, 40 to 400 Hz Input and 120 VAC, 60 Hz Output, Double Conversion, On-Line, Isolated, Rugged Power Conditioner with Power Factor Correction for Military Applications
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Low cost ELT option
-
Frequency counter provides external frequency measurement
-
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
-
Eight or more hours of operation before recharge
-
Automatic power shut-down
-
Ergonomic design
-
Single complete package
-
Integrated bus bars
-
Current mode Analog programming
-
Input 400VAC, 220A/ph, Delta
-
Dual Input, Pole Mount Double Conversion Isolated On Line 120 and 277 VAC Input, 12, 24 and 48 VDC and 120 VAC pass through Output UPS System with Power Factor Correction in a NEMA 3R cabinet for Industrial applications
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form