-
For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
-
Standard cable lengths are 3, 5, 9 and 15 meters.
IntelliPower - FA10509 Power Distribution Unit
-
500 Watts, 12 VDC Input and Output, 9 Toggle Switched Circuit Breakers, 4 Position Input Terminal Block Strip, and 6 and 10 Position Output Terminal Block Strips
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 2U, ≤23"D |
Input Voltage | 120 or 230 VAC |
Input Frequency | 50/60 |
Input Connector | Terminal Block |
Output Voltage | 120 VAC |
Output Frequency | 50/60 |
Output Connector | Pigtail |
More Product Information
-
Rugged Rack Mount Double Conversion On Line Isolated Power Conditioning System with Power Factor Correction (No batteries)
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
-
2000 VA, 1400 Watts, Input at 120 VAC (-20% + 15%), 50/60 Hz, Output at 120 VAC, 50/60 Hz follower, Double Conversion, Non Isolated, Rugged UPS with Power Factor Correction
-
500 MHz - 4 GHz bandwidths
-
Up to 40 GS/s sample rate
-
15.4" capacitive touch screen
-
MAUI with OneTouch
-
Powerful, Deep Toolbox
-
Exceptional Serial Data Tools
-
16 digital channels with 1.25 GS/s
-
Huge Applied Offset Range
-
Optional Application Packages
-
VIAVI designed RF test system, fully integrated into the ATEC® Test System
-
Simple Ethernet interface between RFEM and ATEC® Test System permits easy retrofit to existing ATE installations
-
Powerful test executive interface offers many advantages to the test operator
-
Global service and support provided jointly by SPHEREA and VIAVI Solutions
-
Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, GPS, and other RF systems
-
Complete RFEM and TPS information can be consulted on the SPHEREA Customer Support and Services MySpherea Internet web site
-
Our objective is to offer test coverage of RF products from all major OEMs
- The fourth generation of Ai’s popular Inline Control System.
- High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
- Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
- Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead.
-
3000VA, 2100W High Temp, Double Conversion, Online, Isolated, Global Input 120/230VAC, 50/60Hz Input UPS with 120VAC, 60Hz Output, Power Factor Correction and Extended Internal Hot Swap Batteries for Military Applications
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form